Thermal cure-induced crosslinked polybenzimidazole containing 4,5-diazafluorene and pyridine for high-temperature proton exchange membrane
Source abstract
Abstract
Crosslinking has proven a powerful strategy for construction of highly proton-conductive membranes for high-temperature proton exchange membrane fuel cells (HTPEMFCs). In this work, a facile thermal cure-induced crosslink process is developed for crosslinking a novel nitrogen-dense distribution polybenzimidazole containing 4,5-diazafluorene (PBPBI) from a new diacid monomer, 9,9-di[4-(4-carboxy phenoxy) phenyl]-4,5-diazafluorene (DADCA). Because of the introduction of 4,5-diazafluorene unit, the solubility of polybenzimidazole in common used organic solvents and the proton conductivity of PBPBI are effectively improved. The thermal cure-induced cross-linked PBPBI membranes show excellent mechanical properties and high proton conductivities up to 0.1002 S cm −1 (180 °C, dry condition). A maximum power density of 632.4 mW cm −2 is obtained at 140 °C without humidification.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Conducting polymers and applications · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges10.1016/j.progpolymsci.2011.01.003 ↗
2. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies10.1039/D0CS00296H ↗
3. Proton exchange membranes for high temperature proton exchange membrane fuel cells: challenges and perspectives10.1016/j.jpowsour.2022.231386 ↗
4. Advancements in proton exchange membranes for high-performance high-temperature proton exchange membrane fuel cells (HT-PEMFC)10.1515/revce-2019-0079 ↗
5. Recent advances in polybenzimidazole/phosphoric acid membranes for high-temperature fuel cells10.1002/pi.4708 ↗
6. Polymerized imidazolium ionic liquids crosslinking sulfonated poly(ether ether ketone) (SPEEK) for high-temperature proton exchange membrane10.1039/C6RA21616A ↗
7. New high-performance bulky N-heterocyclic group functionalized poly(terphenyl piperidinium) membranes for HT-PEMFC applications10.1016/j.memsci.2021.119884 ↗
8. 1,2,4-Triazole functionalized poly(arylene ether ketone) for high temperature proton exchange membrane with enhanced oxidative stability10.1016/j.memsci.2017.09.072 ↗
9. Polymer fuel cells based on polybenzimidazole/H3PO410.1039/c2ee03055a ↗
10. Synthesis and mechanism of PBI phosphonate, poly [2, 2′-(-m-phenylene)-5, 5′-bibenzimidazole phosphonate ester], and its polyphosphonic acid derivatives10.1021/ma100320w ↗
11. A concise guide to sustainable PEMFCs: recent advances in improving both oxygen reduction catalysts and proton exchange membranes10.1039/C5CS00302D ↗
12. Dimensionally-stable phosphoric acid–doped polybenzimidazoles for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2016.11.013 ↗
13. Polybenzimidazole membrane crosslinked with quaternized polyaniline as high-temperature proton exchange membrane: enhanced proton conductivity and stability10.1016/j.memsci.2022.120795 ↗
14. Polybenzimidazole/ionic-liquid-functional silica composite membranes with improved proton conductivity for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2017.07.026 ↗
15. Design and properties of functional hybrid organic–inorganic membranes for fuel cells10.1039/c0cs00144a ↗
16. A stable tetraalkoxy (hydroxy) phosphorane and phosphorane oxide anion by hydrolysis of tetraalkoxy (halogen) phosphoranes10.1002/anie.198202081 ↗
17. Intermediate temperature proton conductors for PEM fuel cells based on phosphonic acid as protogenic group: a progress report10.1039/B618686F ↗
18. Fast proton hopping detection in ice Ih by quasi-elastic neutron scattering10.1021/jp2008094 ↗
19. Predicting hydrogen-bond strengths from Acid− base molecular properties. The pKa slide rule: toward the solution of a long-lasting problem10.1021/ar800001k ↗
20. Variable-temperature X-ray crystallographic and DFT computational study of the NH···O/N···HO tautomeric competition in 1-(Arylazo)-2-naphthols. Outline of a transiton-state hydrogen-bond theory10.1021/ja0453984 ↗
21. PBI‐based polymer membranes for high temperature fuel cells–preparation, characterization and fuel cell demonstration10.1002/fuce.200400020 ↗
22. Tetrazole‐based, anhydrous proton exchange membranes for fuel cells10.1002/adma.201304121 ↗
23. Promotion of proton conduction in polymer electrolyte membranes by 1 H-1, 2, 3-triazole10.1021/ja052280u ↗
24. Tetrazole substituted polymers for high temperature polymer electrolyte fuel cells10.1039/C5TA01936B ↗
25. Preparation and characterization of novel pyridine-containing polybenzimidazole membrane for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2015.12.006 ↗
26. Stable and highly conductive polycation–polybenzimidazole membrane blends for intermediate temperature polymer electrolyte membrane fuel cells10.1021/acsaem.9b01802 ↗
27. Novel phosphoric acid (PA)-poly (ether ketone sulfone) with flexible benzotriazole side chains for high-temperature proton exchange membranes10.1038/s41428-018-0118-7 ↗
28. Constructing high-density hydrogen bonding networks via introducing the bipyridine group for high-performance fuel cell proton exchange membranes10.1021/acsaem.2c02346 ↗
29. Intermolecular ionic cross-linked sulfonated poly(ether ether ketone) membranes containing diazafluorene for direct methanol fuel cell applications10.1016/j.jpowsour.2015.02.159 ↗
30. Synthesis and characterization of new polybenzimidazopyrrolones derived from pyridine-bridged aromatic tetraamines and dianhydrides10.1002/pola.20030 ↗
31. Soluble polybenzimidazoles for PEM: synthesized from efficient, inexpensive, readily accessible alternative tetraamine monomer10.1021/ma401404c ↗
32. Polymer electrolyte membrane from polybenzimidazoles: influence of tetraamine monomer structure10.1016/j.polymer.2018.01.029 ↗
33. Carbon cationic relay via superelectrophiles: synthesis of spiro-diazafluorenes10.1021/acs.orglett.6b02595 ↗
34. Polybenzimidazole block copolymers for fuel cell: synthesis and studies of block length effects on nanophase separation, mechanical properties, and proton conductivity of PEM10.1021/am500668c ↗
35. Polybenzimidazole-Clay Nanocomposite Membrane for PEM fuel cell: effect of organomodifier structure10.1016/j.polymer.2019.01.066 ↗
36. Polybenzimidazole/ionic liquid functionalized graphene oxide nanocomposite membrane for alkaline anion exchange membrane fuel cells10.1016/j.matlet.2016.03.057 ↗
37. Durable high polymer content m/p-Polybenzimidazole membranes for extended lifetime electrochemical devices10.1021/acsaem.8b01820 ↗
38. Controlling antimicrobial activity and drug loading capacity of chitosan-based layer-by-layer films10.1016/j.ijbiomac.2020.12.218 ↗
39. Thermal degradation of polymers. IV. Poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole10.1080/10601326708053980 ↗
40. Hygrothermal behavior of polybenzimidazole10.1016/j.polymer.2016.04.020 ↗
41. Thermal crosslinking of PBI/sulfonated polysulfone based blend membranes10.1039/C6TA07653J ↗
42. Synthesis and properties of poly(aryl sulfone benzimidazole) and its copolymers for high temperature membrane electrolytes for fuel cells10.1039/c2jm30217a ↗
43. Construction of novel proton transport channels by triphosphonic acid proton conductor-doped crosslinked mPBI-based high-temperature and low-humidity proton exchange membranes10.1021/acssuschemeng.0c08799 ↗
44. Performance enhancement of polybenzimidazole based high temperature proton exchange membranes with multifunctional crosslinker and highly sulfonated polyaniline10.1016/j.memsci.2017.10.053 ↗
45. Novel cross-linked membranes based on polybenzimidazole and polymeric ionic liquid with improved proton conductivity for HT-PEMFC applications10.1016/j.jtice.2018.06.036 ↗
46. Highly stable membranes of poly(phenylene sulfide benzimidazole) cross-linked with polyhedral oligomeric silsesquioxanes for high-temperature proton transport10.1021/acsaem.0c01285 ↗
47. Proton exchange membranes with cross-linked interpenetrating network of sulfonated polyvinyl alcohol and poly(2-acrylamido-2-methyl-1-propanesulfonic acid): excellent relative selectivity10.1016/j.memsci.2019.117511 ↗
48. Developments of new proton conducting membranes based on different polybenzimidazole structures for fuel cells applications10.1016/j.jpowsour.2006.01.081 ↗
49. Fabrication of crosslinked polybenzimidazole membranes by trifunctional crosslinkers for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2017.12.141 ↗
50. Long-term durability of HT-PEM fuel cells based on thermally cross-linked polybenzimidazole10.1016/j.jpowsour.2016.12.075 ↗
51. Influence of thermal post-curing on the degradation of a cross-linked polybenzimidazole-based membrane for high temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2014.04.158 ↗
52. High proton conduction at above 100 °C mediated by hydrogen bonding in a lanthanide metal–organic framework10.1021/ja5069855 ↗
53. Novel triple tertiary amine polymer-based hydrogen bond network inducing highly efficient proton-conducting channels of amphoteric membranes for high-performance vanadium redox flow battery10.1021/acsami.8b18617 ↗
54. Anhydrous proton conduction at 150 °C in a crystalline metal–organic framework10.1038/nchem.402 ↗
55. Synthesis and characterization of high temperature proton exchange membrane from isocyanatopropyltriethoxysilane and hydroxyethane diphosphonic acid10.1016/j.ijhydene.2014.10.126 ↗
56. Keeping superprotonic conductivity over a wide temperature region via sulfate hopping sites-decorated zirconium-oxo clusters10.1002/smll.202205444 ↗
57. Water mediated proton conductance in a hydrogen-bonded Ni(ii)-bipyridine-glycoluril chloride self-assembled framework10.1039/C7CE01814B ↗
58. Proton conduction in a new 3-D open-framework vanadoborate with an abundant hydrogen bond system10.1039/C7DT01334E ↗
59. On the nanosecond proton dynamics in phosphoric acid–benzimidazole and phosphoric acid–water mixtures10.1039/C7CP04116K ↗