Fast self-preheating system and energy conversion model for lithium-ion batteries under low-temperature conditions
Source abstract
Abstract
Low temperature is one of the major drawbacks of electric cars in high latitudes. This problem can be addressed using a battery self-preheating system. The existing self-heating systems have problems, such as slow heating rate, complex control system, single thermal management function and poor safety. Herein, we propose a conductive phase change material (cPCM)-based self-preheating system that generates heat simultaneously using the internal resistance of cells and external resistance of the cPCM. This self-preheating system shows a high heating rate of 17.14 °C/min and excellent temperature uniformity (temperature difference of 3.58 °C). The system can preheat the battery safely in the capacity range of 20%–100%. When the battery pack is set in −20 °C, the effective electric energy can be increased by 550% after preheating. An energy conversion model is also built to measure the relationship between the energy improvement of battery and the energy consumption by preheating. This energy conversion model can help the system to make the optimal preheating strategy and obtain the maximum discharge energy. Nevertheless, based on the outcome of this study, this self-preheating strategy can effectively solve the problem of battery in low temperatures and maximize the effective electric energy of the battery.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced Battery Materials and Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A materials perspective on Li-ion batteries at extreme temperatures10.1038/nenergy.2017.108 ↗
2. High-performance Sn@carbon nanocomposite anode for lithium-ion batteries: lithium storage processes characterization and low-temperature behavior10.1016/j.electacta.2013.05.150 ↗
3. Influence of low temperature conditions on lithium-ion batteries and the application of an insulation material10.1039/C9RA00490D ↗
4. Predictive modeling of battery degradation and greenhouse gas emissions from U.S. state-level electric vehicle operation10.1038/s41467-018-04826-0 ↗
5. Challenges and development of lithium-ion batteries for low temperature environments10.1016/j.etran.2021.100145 ↗
6. The effect of electrolyte composition on lithium plating during low temperature charging of Li-ion cells10.1149/07521.0001ecst ↗
7. The state of the art on preheating lithium-ion batteries in cold weather10.1016/j.est.2019.101059 ↗
8. Model prediction-based battery-powered heating method for series-connected lithium-ion battery pack working at extremely cold temperatures10.1016/j.energy.2020.119236 ↗
9. Lithium-ion battery structure that self-heats at low temperatures10.1038/nature16502 ↗
10. Computational design and refinement of self-heating lithium ion batteries10.1016/j.jpowsour.2016.08.028 ↗
11. Rapid self-heating and internal temperature sensing of lithium-ion batteries at low temperatures10.1016/j.electacta.2016.09.117 ↗
12. Experimental study on pulse self–heating of lithium–ion battery at low temperature10.1016/j.ijheatmasstransfer.2019.02.020 ↗
13. Researches of composite phase change material cooling/resistance wire preheating coupling system of a designed 18650-type battery module10.1016/j.applthermaleng.2017.08.022 ↗
14. Experimental investigation of thermal management system for lithium ion batteries module with coupling effect by heat sheets and phase change materials10.1002/er.4081 ↗
15. Experimental research on the effective heating strategies for a phase change material based power battery module10.1016/j.ijheatmasstransfer.2018.07.037 ↗
16. Heat transfer characteristics of the integrated heating system for cabin and battery of an electric vehicle under cold weather conditions10.1016/j.ijheatmasstransfer.2017.10.007 ↗
17. Performance of plug-in hybrid electric vehicle under low temperature condition and economy analysis of battery pre-heating10.1016/j.jpowsour.2018.08.093 ↗
18. Researches on modeling and experiment of Li-ion battery PTC self-heating in electric vehicles10.1016/j.egypro.2016.12.012 ↗
19. PTC self-heating experiments and thermal modeling of lithium-ion battery pack in electric vehicles10.3390/en10040572 ↗
20. Numerical study on the effects of battery heating in cold climate10.1016/j.est.2019.100969 ↗
21. Experimental investigation on heating performance of heat pump for electric vehicles at −20°C ambient temperature10.1016/j.enconman.2015.01.024 ↗
22. An optimal internal-heating strategy for lithium-ion batteries at low temperature considering both heating time and lifetime reduction10.1016/j.apenergy.2019.113797 ↗
23. A review on thermal management of lithium-ion batteries for electric vehicles10.1016/j.energy.2021.121652 ↗
24. Heating strategies for Li-ion batteries operated from subzero temperatures10.1016/j.electacta.2013.03.147 ↗
25. An efficient Bi-directional DC/DC charger for electric vehicle battery charging
26. Add-on type pulse charger for quick charging Li-ion batteries10.3390/electronics9020227 ↗
27. A bidirectional high-power-quality grid interface with a novel bidirectional noninverted buck–boost converter for PHEVs10.1109/TVT.2012.2192459 ↗
28. A rapid lithium-ion battery heating method based on bidirectional pulsed current: heating effect and impact on battery life10.1016/j.apenergy.2020.115957 ↗
29. A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures10.1016/j.apenergy.2015.11.034 ↗
30. A rapid low-temperature internal heating strategy with optimal frequency based on constant polarization voltage for lithium-ion batteries10.1016/j.apenergy.2016.05.151 ↗
31. Low-temperature preparation of solid-solid phase change polymer for thermal management modules10.1016/j.ces.2021.116985 ↗
32. Experimental study on the thermal management of batteries based on the coupling of composite phase change materials and liquid cooling10.1016/j.applthermaleng.2020.116415 ↗
33. Computationally efficient thermal network model and its application in optimization of battery thermal management system with phase change materials and long-term performance assessment10.1016/j.apenergy.2019.114120 ↗
34. Warming-up effects of phase change materials on lithium-ion batteries operated at low temperatures10.1002/ente.201600083 ↗
35. Investigation of phase change material based battery thermal management at cold temperature using lattice Boltzmann method10.1016/j.enconman.2016.12.009 ↗
36. Network structural CNTs penetrate porous carbon support for phase-change materials with enhanced electro-thermal performance10.1002/aelm.201901428 ↗
37. Multifunctional HDPE/CNTs/PW composite phase change materials with excellent thermal and electrical conductivities10.1016/j.jmst.2021.02.009 ↗
38. Flexible copper foam-based phase change materials with good stiffness-toughness balance, electro-to-thermal conversion ability and shape memory function for intelligent thermal management10.1016/j.compositesa.2021.106420 ↗
39. Phase Change Material (PCM) coat for battery thermal management with integrated rapid heating and cooling functions from -40 °C to 50 °C10.1016/j.mtener.2021.100652 ↗
40. Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation10.1016/j.est.2022.104908 ↗
41. A CNN-ABC model for estimation and optimization of heat generation rate and voltage distributions of lithium-ion batteries for electric vehicles10.1016/j.ijheatmasstransfer.2022.123486 ↗
42. Thermal modelling utilizing multiple experimentally measurable parameters10.3390/batteries8100147 ↗
43. Enhanced optimization algorithm for the structural design of an air-cooled battery pack considering battery lifespan and consistency10.1002/er.8700 ↗
44. Liquid cooling with phase change materials for cylindrical Li-ion batteries: an experimental and numerical study10.1016/j.energy.2019.116565 ↗