Porous nanofibers comprising VN nanodots and densified N-doped CNTs as redox-active interlayers for Li–S batteries
Source abstract
Abstract
A synthesis strategy to obtain hierarchically porous N-doped carbon (P–N–C) nanofibers (NFs) comprising VN nanodots and highly densified-entangled N-doped CNTs (N-CNTs) was visualized. The unique redox-active nanostructure was applied as a multifunctional interlayer for highly stable Li–S batteries (LSBs). The P–N–C skeleton obtained via selective removal of amorphous carbon (AC) and polystyrene (PS) not only guarantees efficient electrolyte percolation but also facilitates rapid diffusion of charged species during charge-discharge processes. Moreover, the N-CNTs constituting the fiber matrix increase the overall conductivity of the framework. Besides, highly conductive vanadium nitride (VN) nanodots act as chemisorption sites for efficient lithium polysulfide capturing and prohibit their diffusion towards the anode through efficient catalytic conversion, thus improving the elemental S utilization. The Li–S cells utilizing P–N–C@VN/N-CNT NF as a multifunctional barrier resulted in decent rate capabilities (559 mA h g −1 at 2.0 C) and long-term cycling stabilities at low and high C-rates (432 mA h g −1 after the 400th cycle at 0.1 C and 290 mA h g −1 at the end of 600th cycle at 1.0 C). This is attributed to the combined synergistic effects of the P–N–C framework, N-CNT matrix, and polar VN nanodots.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Electrochemical performances of Li-rich layered-layered Li2MnO3-LiMnO2 solid solutions as cathode material for lithium-ion batteries10.1016/j.jallcom.2016.11.199 ↗
2. Challenges and prospects of lithium–sulfur batteries10.1021/ar300179v ↗
3. Development of surface functionalized ZnO-doped LiFePO4/C composites as alternative cathode material for lithium ion batteries10.1016/j.apsusc.2016.09.105 ↗
4. Synergetic effects of cation (K+) and anion (S2−)-doping on the structural integrity of Li/Mn-rich layered cathode material with considerable cyclability and high-rate capability for Li-ion batteries10.1016/j.electacta.2020.137471 ↗
5. A perspective toward practical lithium–sulfur batteries10.1021/acscentsci.0c00449 ↗
6. Physicochemical and electrochemical performance of LiFe1−xNixPO4 (0≤ x≤ 1.0) solid solution as potential cathode material for rechargeable lithium-ion battery10.1016/j.ceramint.2017.01.115 ↗
7. A short review on dissolved lithium polysulfide catholytes for advanced lithium-sulfur batteries10.1007/s11814-020-0729-5 ↗
8. New approaches for high energy density lithium–sulfur battery cathodes10.1021/ar3001348 ↗
9. Hierarchically porous N-doped C nanofibers comprising TiO2 quantum dots and ZIF-8-derived hollow C nanocages as ultralight interlayer for stable Li–S batteries10.1016/j.compositesb.2022.109856 ↗
10. Hierarchically porous nanofibers comprising multiple core–shell Co3O4@graphitic carbon nanoparticles grafted within N-doped CNTs as functional interlayers for excellent Li–S batteries10.1016/j.cej.2021.130805 ↗
11. An advanced lithium‐sulfur battery10.1002/adfm.201200689 ↗
12. Lithium–sulfur cells: the gap between the state‐of‐the‐art and the requirements for high energy battery cells10.1002/aenm.201401986 ↗
13. Asymmetric separator integrated with ferroelectric-BaTiO3 and mesoporous-CNT for the reutilization of soluble polysulfide in lithium-sulfur batteries10.1016/j.jallcom.2021.162272 ↗
14. Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: progress and prospects10.1016/j.ensm.2015.09.008 ↗
15. Revisiting scientific issues for industrial applications of lithium–sulfur batteries10.1002/eem2.12021 ↗
16. Freestanding interlayers for Li-S batteries: design and synthesis of hierarchically porous N-doped C nanofibers comprising vanadium nitride quantum dots and MOF-derived hollow N-doped C nanocages10.1039/D1TA01802G ↗
17. Nanofibers comprising interconnected chain‐like hollow N‐doped C nanocages as 3D free‐standing cathodes for Li–S batteries with super‐high sulfur content and lean electrolyte/sulfur ratio
18. Three-dimensional sulfur/graphene multifunctional hybrid sponges for lithium-sulfur batteries with large areal mass loading
19. A highly ordered meso@microporous carbon-supported sulfur@smaller sulfur core–shell structured cathode for Li–S batteries10.1021/nn503220h ↗
20. A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries10.1038/nmat2460 ↗
21. Carbon nanomaterials for advanced lithium sulfur batteries10.1016/j.nantod.2018.02.006 ↗
22. Conductive porous vanadium nitride/graphene composite as chemical anchor of polysulfides for lithium-sulfur batteries
23. Free-standing TiO2 nanowire-embedded graphene hybrid membrane for advanced Li/dissolved polysulfide batteries10.1016/j.nanoen.2014.12.029 ↗
24. Reduced graphene oxide wrapped MOFs-derived cobalt-doped porous carbon polyhedrons as sulfur immobilizers as cathodes for high performance lithium sulfur batteries10.1016/j.nanoen.2016.02.049 ↗
25. Ternary hybrid material for high-performance lithium–sulfur battery10.1021/jacs.5b07071 ↗
26. Improving lithium–sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface10.1038/ncomms4943 ↗
27. A shuttle effect free lithium sulfur battery based on a hybrid electrolyte10.1039/C4CP03694H ↗
28. V2O3-decorated carbon nanofibers as a robust interlayer for long-lived, high-performance, room-temperature sodium–sulfur batteries10.1016/j.cej.2021.134205 ↗
29. Ultrafine TiO2 decorated carbon nanofibers as multifunctional interlayer for high-performance lithium–sulfur battery10.1021/acsami.6b07487 ↗
30. Fe3O4-decorated porous graphene interlayer for high-performance lithium–sulfur batteries10.1021/acsami.8b07316 ↗
31. A multifunctional SnO2-nanowires/carbon composite interlayer for high-performance lithium-sulfur batteries10.1016/j.cej.2020.126042 ↗
32. TiS2–Polysulfide hybrid cathode with high sulfur loading and low electrolyte consumption for lithium–sulfur batteries10.1021/acsenergylett.7b01321 ↗
33. Mechanism investigation of high-performance Li–polysulfide batteries enabled by tungsten disulfide nanopetals10.1021/acsnano.8b04857 ↗
34. Tungsten disulfide catalysts supported on a carbon cloth interlayer for high performance Li–S battery10.1002/aenm.201602567 ↗
35. Cobalt-doped vanadium nitride yolk–shell nanospheres@carbon with physical and chemical synergistic effects for advanced Li–S batteries10.1021/acsami.7b18955 ↗
36. 2D Mon‐VN heterostructure to regulate polysulfides for highly efficient lithium‐sulfur batteries10.1002/anie.201810579 ↗
37. Double-layered modified separators as shuttle suppressing interlayers for lithium–sulfur batteries10.1021/acsami.8b14196 ↗
38. Functional Mesoporous carbon‐coated separator for long‐life, high‐energy lithium–sulfur batteries10.1002/adfm.201502251 ↗
39. Bifunctional separator with a light‐weight carbon‐coating for dynamically and statically stable lithium‐sulfur batteries10.1002/adfm.201400845 ↗
40. Facile and scalable synthesis of nitrogen-doped ordered mesoporous carbon for high performance supercapacitors10.1007/s11814-019-0414-8 ↗
41. Recent advances in the synthesis of mesoporous materials and their application to lithium-ion batteries and hybrid supercapacitors10.1007/s11814-020-0693-0 ↗
42. Silicon and porous MWCNT composite as high capacity anode for lithium-ion batteries10.1007/s11814-020-0559-5 ↗
43. Carbonized eggshell membrane as a natural polysulfide reservoir for highly reversible Li‐S batteries10.1002/adma.201304365 ↗
44. Highly reversible lithium/dissolved polysulfide batteries with carbon nanotube electrodes10.1002/anie.201301250 ↗
45. A freestanding metallic tin-modified and nitrogen-doped carbon skeleton as interlayer for lithium-sulfur battery10.1016/j.cej.2020.125723 ↗
46. Interlayer material selection for lithium-sulfur batteries10.1016/j.joule.2019.01.003 ↗
47. Hierarchically well‐developed porous graphene nanofibers comprising N‐doped graphitic C‐coated cobalt oxide hollow nanospheres as anodes for high‐rate Li‐ion batteries10.1002/smll.202002213 ↗
48. Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers10.3762/bjnano.7.109 ↗
49. Co,N-Codoped porous vanadium nitride nanoplates as superior bifunctional electrocatalysts for hydrogen evolution and oxygen reduction reactions10.1039/C9NR02637A ↗
50. Vanadium nitride encapsulated carbon fibre networks with furrowed porous surfaces for ultrafast asymmetric supercapacitors with robust cycle life10.1039/C7TA06345H ↗
51. Investigating the effect of nitrogen on the structural and tribo-mechanical behavior of vanadium nitride thin films deposited using RF magnetron sputtering10.1007/s10853-021-06393-0 ↗
52. Rational design of perforated bimetallic (Ni, Mo) sulfides/N‐doped graphitic carbon composite microspheres as anode materials for superior Na‐ion batteries
53. Porous nitrogen-doped graphene nanofibers comprising metal organic framework-derived hollow and ultrafine layered double metal oxide nanocrystals as high-performance anodes for lithium-ion batteries10.1016/j.jpowsour.2022.231030 ↗
54. Fibrous network of highly integrated carbon nanotubes/MoO3 composite bundles anchored with MoO3 nanoplates for superior lithium ion battery anodes10.1016/j.jiec.2019.12.017 ↗
55. Porous microspheres comprising CoSe2 nanorods coated with N-doped graphitic C and polydopamine-derived C as anodes for long-lived Na-ion batteries10.1007/s40820-022-00855-z ↗
56. Camphene-derived hollow and porous nanofibers decorated with hollow NiO nanospheres and graphitic carbon as anodes for efficient lithium-ion storage10.1016/j.jiec.2022.07.017 ↗
57. Self-supported hierarchically porous 3D carbon nanofiber network comprising Ni/Co/NiCo2O4 nanocrystals and hollow N-doped C nanocages as sulfur host for highly reversible Li–S batteries10.1016/j.cej.2022.137141 ↗
58. Novel hybrid nanoparticles of vanadium nitride/porous carbon as an anode material for symmetrical supercapacitor10.1007/s40820-016-0105-5 ↗
59. Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries10.1088/1361-6463/aa708c ↗
60. A novel three-dimensional mesoporous microspheres comprising N-doped graphitic carbon-coated FexP nanoparticles as multifunctional interlayers to suppress polysulfide crossover in Li‒S batteries10.1016/j.apsusc.2022.155892 ↗
61. Sulfur‐doped carbon with enlarged interlayer distance as a high‐performance anode material for sodium‐ion batteries10.1002/advs.201500195 ↗
62. Ambient-air sulfurization process for Cu2ZnSnS4 thin film solar cells: self-creating inert atmosphere using sulfur vapor10.1021/acsaem.9b01256 ↗
63. A highly efficient polysulfide mediator for lithium–sulfur batteries10.1038/ncomms6682 ↗
64. Comparative study of imide-based Li salts as electrolyte additives for Li-ion batteries10.1016/j.jpowsour.2017.11.045 ↗