journal article·2022-06

Enhancing the properties of water and gas management for proton exchange membrane fuel cells via tailored intersected cracks in a microporous layer

Shuang Wang, Shumeng Guan, Lichang Zhang, Fen Zhou, Jinting Tan, Mu Pan

Publisher page

Abstract

The microporous layer (MPL) is a crucial structure for water and gas management in proton exchange membrane fuel cells (PEMFCs). The effect of cracks introduced during the preparation of the MPL on the water and gas management of the PEMFC cannot be ignored. In this paper, the drying temperature is employed to quantitatively control the ratio of the intersected crack area (RICA) on the MPL. MPLs with RICA values from 3.4% to 7.3% are prepared. The RICA simultaneously enhances the water and gas permeability of the MPL. Moreover, with an increase in the RICA, the current density of the dry-wet boundary of the oxygen transport resistance moves in the higher direction. Meanwhile, the output performance is also promoted with the increase in the RICA. All findings suggest that intersected cracks are beneficial for improving MPL water and gas management.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Investigating the water transport in porous media for PEMFCs by liquid water visualization in ESEM10.1002/fuce.201000110 ↗
2. Materials for fuel-cell technologies10.1038/35104620 ↗
3. High temperature PEM fuel cells10.1016/j.jpowsour.2006.05.034 ↗
4. Solid polymer electrolyte membranes for fuel cell applications - a review10.1016/j.memsci.2005.01.035 ↗
5. Review of the proton exchange membranes for fuel cell applications10.1016/j.ijhydene.2010.05.017 ↗
6. Pore-scale investigation of the effect of micro-porous layer on water transport in proton exchange membrane fuel cell10.1149/1945-7111/abc30a ↗
7. Lattice Boltzmann simulation of liquid water transport inside and at interface of gas diffusion and micro-porous layers of PEM fuel cells10.1016/j.ijheatmasstransfer.2019.05.097 ↗
8. Improving water management in fuel cells through microporous layer modifications: fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
9. Tuning MPL intrusion to increase oxygen transport in dry and partially saturated polymer electrolyte membrane fuel cell gas diffusion layers10.1149/2.0021907jes ↗
10. Investigating the effect of non-uniform microporous layer intrusion on oxygen transport in dry and partially saturated polymer electrolyte membrane fuel cell gas diffusion layers10.1149/08008.0175ecst ↗
11. Synchrotron radiography and tomography of water transport in perforated gas diffusion media10.1016/j.jpowsour.2013.02.014 ↗
12. Liquid and oxygen transport in defective bilayer gas diffusion material of proton exchange membrane fuel cell10.1016/j.ijhydene.2013.01.045 ↗
13. An overview of cracks and interfacial voids in membrane electrode assemblies in polymer electrolyte fuel cells10.1299/jtst.2015jtst0002 ↗
14. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC10.1016/j.elecom.2011.03.033 ↗
15. Investigation of 3D water transport paths in gas diffusion layers by combined in-situ synchrotron X-ray radiography and tomography10.1016/j.elecom.2011.06.023 ↗
16. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
17. Flow properties of an intact MPL from nano-tomography and pore network modelling10.1016/j.fuel.2014.07.040 ↗
18. Mass transfer enhancement of proton exchange membrane fuel cell
19. Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells10.1016/j.ijhydene.2014.08.027 ↗
20. Microscopic analysis of interlayer structure and oxygen transport behaviors in porous electrode in PEMFC10.1149/05801.0489ecst ↗
21. Impact of cracked gas diffusion layer on performance of polymer electrolyte membrane fuel cells10.1016/j.jiec.2020.08.014 ↗
22. Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks10.1016/j.renene.2012.04.011 ↗
23. Characterization of interfacial morphology in polymer electrolyte fuel cells: micro-porous layer and catalyst layer surfaces10.1016/j.jpowsour.2009.11.032 ↗
24. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
25. How to reduce the crack density in drying colloidal material?10.2516/ogst/2013119 ↗
26. Controlling cracking formation in fuel cell catalyst layers10.1016/j.jpowsour.2019.02.058 ↗
27. On the role of the microporous layer in PEMFC operation10.1016/j.elecom.2008.12.053 ↗
28. Structural design of gas diffusion layer for proton exchange membrane fuel cell at varying humidification10.1016/j.jpowsour.2020.228355 ↗
29. Water transport mechanisms in PEMFC gas diffusion layers10.1149/1.3468615 ↗
30. Effect of hydrophobic additive on oxygen transport in catalyst layer of proton exchange membrane fuel cells10.1016/j.jpowsour.2018.01.068 ↗