Novel non-destructive detection methods of lithium plating in commercial lithium-ion batteries under dynamic discharging conditions
Source abstract
Abstract
Lithium plating is one of the severest problems of lithium-ion batteries at low temperature and high charge rates, which induces severe capacity fading and may lead to safety problems. Therefore, reliable and non-destructive detection methods of lithium plating are needed for safety and reliable operation of lithium-ion batteries. In electric vehicles, lithium-ion batteries are operated under dynamic discharging conditions which exceeds the applicable scope of the existing methods. In this paper, two lithium plating detection methods suitable for offline and online use are proposed. The detection of lithium plating based on the high voltage plateau in the discharge profile at plating conditions is further extended to the dynamic discharging conditions. The offline method is applicable to data platform and has further potential to be combined with big data analysis. The online method can be operated in real-time during discharging and therefore can be used in the battery management system. Three kinds of large-format commercial batteries are used to conduct experiments to verify the effectiveness of the proposed methods. Characteristic parameters which have positive correlation with the amount of lithium plating are proposed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A review of modeling, acquisition, and application of lithium-ion battery impedance for onboard battery management10.1016/j.etran.2020.100093 ↗
2. Ultrafast charging of energy-dense lithium-ion batteries for urban air mobility10.1016/j.etran.2021.100103 ↗
3. A non‐Newtonian fluidic cellulose‐modified glass microfiber separator for flexible lithium‐ion batteries10.1002/eom2.12126 ↗
4. Self‐standing hard carbon anode derived from hyper‐linked nanocellulose with high cycling stability for lithium‐ion batteries10.1002/eom2.12091 ↗
5. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
6. Double‐effect of highly concentrated acetonitrile‐based electrolyte in organic lithium‐ion battery
7. Surface engineering enables highly reversible lithium-ion storage and durable structure for advanced silicon anode
8. Review—lithium plating detection methods in li-Ion batteries10.1149/1945-7111/abd3b8 ↗
9. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
10. A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries10.1016/j.etran.2019.100034 ↗
11. Re-evaluating common electrolyte additives for high-voltage lithium ion batteries
12. Lithium plating on the anode for lithium-ion batteries during long-term low temperature cycling10.1016/j.jpowsour.2020.229312 ↗
13. Thermal runaway triggered by plated lithium on the anode after fast charging10.1021/acsami.9b16589 ↗
14. Battery eruption triggered by plated lithium on an anode during thermal runaway after fast charging
15. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
16. Mitigating thermal runaway of lithium-ion batteries10.1016/j.joule.2020.02.010 ↗
17. Enabling fast charging – a battery technology gap assessment10.1016/j.jpowsour.2017.06.055 ↗
18. A comparative study of commercial lithium ion battery cycle life in electrical vehicle: aging mechanism identification10.1016/j.jpowsour.2013.11.029 ↗
19. Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2 + LiyMn2O4 composite cathode10.1016/j.jpowsour.2015.01.051 ↗
20. Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling10.1016/j.jpowsour.2013.06.130 ↗
21. Lithium dendrite and solid electrolyte interphase investigation using OsO410.1016/j.jpowsour.2014.04.134 ↗
22. Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries10.1016/j.mattod.2017.11.001 ↗
23. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
24. In situ solid state 7 Li NMR observations of lithium metal deposition during overcharge in lithium ion batteries10.1149/2.0411506jes ↗
25. In situ 7Li nuclear magnetic resonance study of the relaxation effect in practical lithium ion batteries10.1016/j.carbon.2014.07.080 ↗
26. Study of li metal deposition in lithium ion battery during low-temperature cycle using in situ solid-state 7 Li nuclear magnetic resonance10.1149/2.1921713jes ↗
27. Detecting onset of lithium plating during fast charging of Li-ion batteries using operando electrochemical impedance spectroscopy10.1016/j.xcrp.2021.100589 ↗
28. In-operando Raman study of lithium plating on graphite electrodes of lithium ion batteries10.1016/j.electacta.2020.137487 ↗
29. Lithium acetylide: a spectroscopic marker for lithium deposition during fast charging of Li-ion cells10.1021/acsaem.8b01975 ↗
30. Study of the charging process of a LiCoO2-based Li-ion battery10.1016/j.jpowsour.2006.02.087 ↗
31. In-Situ detection of lithium plating using high precision coulometry10.1149/2.0621506jes ↗
32. Multi-directional laser scanning as innovative method to detect local cell damage during fast charging of lithium-ion cells10.1016/j.est.2016.09.002 ↗
33. A new method for detecting lithium plating by measuring the cell thickness10.1016/j.jpowsour.2014.03.142 ↗
34. Lithium plating on graphite negative electrodes: innovative qualitative and quantitative investigation methods10.1149/2.0451514jes ↗
35. In operando acoustic detection of lithium metal plating in commercial LiCoO2/graphite pouch cells
36. Detection of lithium plating based on the distribution of relaxation times
37. Detection of lithium plating in lithium-ion batteries by distribution of relaxation times10.1016/j.jpowsour.2021.229867 ↗
38. A new on-line method for lithium plating detection in lithium-ion batteries10.1016/j.jpowsour.2020.227798 ↗
39. Effects of electrolyte composition on lithium plating in lithium-ion cells10.1149/1.3544439 ↗
40. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
41. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells10.1016/j.jpowsour.2015.11.044 ↗
42. Variational mode decomposition10.1109/TSP.2013.2288675 ↗
43. A hybrid signal-based fault diagnosis method for lithium-ion batteries in electric vehicles10.1109/ACCESS.2021.3052866 ↗
44. A novel approach to reconstruct open circuit voltage for state of charge estimation of lithium ion batteries in electric vehicles10.1016/j.apenergy.2019.113758 ↗