Analytical derivation and analysis of parameter sensitivity for battery electrochemical dynamics
Source abstract
Abstract
Abstract Model state and parameter estimation is a critical issue in battery research, and it has been recognized that the quality of data plays an important role in determining the accuracy of estimation. Consequently, data optimization for estimation has received increasing attention recently. The key is to evaluate the sensitivity of data to the target variables and design/select the most sensitive data for estimation. However, due to the lack of efficient ways to compute sensitivity and reliance on simulation, data optimization is mostly intractable because of the computational complexity, especially for the first-principle electrochemical battery models. To address this challenge, this paper proposes a methodology to derive the analytic expressions for the sensitivity of battery electrochemical parameters by leveraging reasonable model reformulation, approximation, and simplification techniques. The analytic expressions enable theoretic parameter sensitivity analysis under generic current input, which reveals the fundamental features of the sensitivity and sensitive data for different parameters. The compact expressions also facilitate sensitivity computation for data optimization. The results have been verified by comparing with the exact numerical simulation based on the full order electrochemical model, showing satisfactory fidelity over adequate range of real-world operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
2. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
3. Modeling and estimation for advanced battery management10.1146/annurev-control-053018-023643 ↗
4. Multiphysical modeling of energy dynamics for multirotor unmanned aerial vehicles
5. A comparative study of equivalent circuit models for li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
6. A lumped-parameter electro-thermal model for cylindrical batteries10.1016/j.jpowsour.2014.01.097 ↗
7. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
8. Lithium-ion battery state of charge and critical surface charge estimation using an electrochemical model-based extended kalman filter10.1115/1.4002475 ↗
9. Design and parametrization analysis of a reduced-order electrochemical model of graphite/lifepo4 cells for soc/soh estimation10.1016/j.jpowsour.2012.12.120 ↗
10. Extended kalman filtering for battery management systems of lipb-based hev battery packs: Part 3. state and parameter estimation10.1016/j.jpowsour.2004.02.033 ↗
11. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended kalman filter10.1016/j.jpowsour.2015.07.019 ↗
12. State of charge imbalance estimation for battery strings under reduced voltage sensing
13. Condition monitoring in advanced battery management systems: Moving horizon estimation using a reduced electrochemical model10.1109/TMECH.2017.2675920 ↗
14. Adaptive partial differential equation observer for battery state-of-charge/state-of-health estimation via an electrochemical model10.1115/1.4024801 ↗
15. State-of-charge estimation from a thermal–electrochemical model of lithium-ion batteries10.1016/j.automatica.2017.06.030 ↗
16. Nonlinear robust observers for state-of-charge estimation of lithium-ion cells based on a reduced electrochemical model10.1109/TCST.2014.2382635 ↗
17. Analytic bound on accuracy of battery state and parameter estimation10.1149/2.0791509jes ↗
18. How does model reduction affect lithium-ion battery state of charge estimation errors? theory and experiments10.1149/2.0751702jes ↗
19. Theoretical analysis of battery soc estimation errors under sensor bias and variance10.1109/TIE.2018.2795521 ↗
20. Parameterization and validation of an integrated electro-thermal cylindrical lfp battery model
21. A parameter identification method for dynamics of lithium iron phosphate batteries based on step-change current curves and constant current curves10.3390/en9060444 ↗
22. Genetic identification and Fisher identifiability analysis of the doyle–fuller–newman model from experimental cycling of a lifepo4 cell10.1016/j.jpowsour.2012.03.009 ↗
23. A data selection strategy for real-time estimation of battery parameters
24. Analytic analysis of the data-dependent estimation accuracy of battery equivalent circuit dynamics10.1109/LCSYS.2017.2715821 ↗
25. Experiment-driven electrochemical modeling and systematic parameterization for a lithium-ion battery cell10.1016/j.jpowsour.2010.02.029 ↗
26. Parameter estimation and capacity fade analysis of lithium-ion batteries using reformulated models10.1149/1.3609926 ↗
27. Genetic optimization and experimental validation of a test cycle that maximizes parameter identifiability for a li-ion equivalent-circuit battery model10.1016/j.est.2015.10.004 ↗
28. Parameter identification of lithium-ion battery pack for different applications based on cramer-rao bound analysis and experimental study10.1016/j.apenergy.2018.09.126 ↗
29. Parameter identification and maximum power estimation of battery/supercapacitor hybrid energy storage system based on cramer–rao bound analysis10.1109/TPEL.2018.2859317 ↗
30. Optimal experimental design for parameterization of an electrochemical lithium-ion battery model10.1149/2.0421807jes ↗
31. Analytical sensitivity analysis for battery electrochemical parameters
32. Reduction of an electrochemistry-based li-ion battery model via quasi-linearization and pade approximation10.1149/1.3519059 ↗
33. Moura
34. Time-domain fitting of battery electrochemical impedance models10.1016/j.jpowsour.2015.04.099 ↗
35. Effects of nanoparticle geometry and size distribution on diffusion impedance of battery electrodes10.1149/2.023301jes ↗
36. A survey of long-term health modeling, estimation, and control of lithium-ion batteries: challenges and opportunities
37. Khalil · 2002 · vol. 3
38. J. Andersson, reportA General-Purpose Software Framework for Dynamic Optimization PhD thesis, KU Leuven.
39. Sundials: suite of nonlinear and differential/algebraic equation solvers10.1145/1089014.1089020 ↗
40. Jangra · 2019
41. A comparison of model order reduction techniques for electrochemical characterization of lithium-ion batteries
42. Optimization of current excitation for identification of battery electrochemical parameters based on analytic sensitivity expression