journal article·2020-06Open access

LiFePO4 spray drying scale-up and carbon-cage for improved cyclability

Marco G. Rigamonti, Marc Chavalle, He Li, Philippe Antitomaso, Lida Hadidi, Marta Stucchi, Federico Galli, Hayat Khan, Mickaël Dollé, Daria C. Boffito, Gregory S. Patience

Abstract

Abstract The growing market for electrical vehicles requires inexpensive, long-lasting batteries. LiFePO 4 (LFP) melt-synthesized from ore concentrate fits this role, but the manufacturing process requires additional steps that includes grinding large ingots into a nanoparticle suspension followed by a dessication step. Spray drying, rather than tray drying, creates a mesoporous powder that enhances wettability. Adding lactose and high-Mw polyvinyl alcohol (PVA) to the suspension of nanostructures followed by pyrolysis, creates a carbon-cage that interconnects the cathode nanoparticles, imparting better capacity ( LiFePO 4 /C: 161 mA h g−1 at 0.1C), discharge rate (flat plateau, 145 mA h g−1 at 5C), and cyclability (91% capacity retention after 750 cycles at 1C). Particle size affects battery stability; PVA increases the suspension's viscosity and alters the powder morphology, from spherical to hollow particles. A model describes the non-Newtonian suspension's rheology changing: shear, temperature, LFP and PVA loading. Carbon precursors prevent the nanoparticles from sintering during calcination but lactose gasifies 50% of the carbon, according to the chemical and allotropic composition measurements (CS analyzer, XPS, and Raman). The carbon-cage imparts microporosity and we correlate the SEM and TEM powder's morphology with N 2 physisorption porosimetry. Ultrasonication of the suspension fragments the PVA chain, which is detrimental to the final cathode performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Olivine LiFePO4: the remaining challenges for future energy storage10.1039/C4EE04016C ↗
2. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
3. Batteries for electric road vehicles10.1039/C7DT03026F ↗
4. ZnFe2O4/LiFePO4-CNT: a novel high-power lithium-ion battery with excellent cycling performance10.1002/aenm.201400054 ↗
5. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
6. Effect of structure on the Fe3+/Fe2+ redox couple in iron phosphates10.1149/1.1837649 ↗
7. A comparative study of state of charge estimation algorithms for LiFePO4 batteries used in electric vehicles10.1016/j.jpowsour.2012.12.057 ↗
8. Size-controlled synthesis of lifepo4/c composites as cathode materials for lithium ion batteries10.1016/S1452-3981(23)14316-1 ↗
9. A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode10.1149/1.1449302 ↗
10. Arico · Nat. Mater. · 2005 · 4 · 36610.1038/nmat1368 ↗
11. Y. Wang, Y. Wang, E. Hosono, K. Wang, H. Zhou, The design of a LiFePO4/carbon nanocomposite with a core-shell structure and its synthesis by an in situ polymerization restriction method, Angew. Chem. Int. Ed. 47 (39) 7461–7465. doi:10.1002/anie.200802539.10.1002/anie.200802539 ↗
12. Gauthier · 1997
13. Gauthier · 2001
14. Alternative binders for sustainable electrochemical energy storage – the transition to aqueous electrode processing and bio-derived polymers10.1039/C8EE00640G ↗
15. LiFePO4 synthesized via melt synthesis using low-cost iron precursors10.1007/s10008-015-3049-7 ↗
16. Using induction melting to make lithium-ion battery material
17. H. Villazon, P. Sauriol, S. Rousselot, M. Talebi-Esfandarani, T. Bibienne, M. Gauthier, G. Liang, M. Dollé, P. Chartrand, Melt-synthesis of LiFePO4 over a metallic bath, Can. J. Chem. Eng. 0. doi:10.1002/cjce.23406.10.1002/cjce.23406 ↗
18. Production of lithium-ion cathode material for automotive batteries using melting casting process
19. Optimization of LiFePO4 wet media milling and regressive population balance modeling10.1016/j.apt.2017.01.004 ↗
20. Rheological characterisation and phenomenological modelling of non-aqueous nano-suspensions of iron carbide produced by plasma spray10.1002/cjce.21859 ↗
21. Spray dried SiO2 a WO3/TiO2 nd va SiO2 nadium pyrophosphate core-shell catalysts10.1016/j.powtec.2016.10.056 ↗
22. Influence of atomization conditions on spray drying lithium iron phosphate nanoparticle suspensions10.1002/cjce.23106 ↗
23. Mechanism of the Fe3+ reduction at low temperature for s LiFePO4 ynthesis from a polymeric additive10.1021/cm070485r ↗
24. Methods of synthesis and performance improvement of lithium iron phosphate for high rate li-ion batteries
25. Supardi, Crystal structure analysis of LiFePO4 powder prepared by wet chemical reaction and solid-state reaction by using x-ray diffraction (xrd)10.1007/s11581-016-1643-z ↗
26. H. Li, M. Rostamizadeh, K. Mameri, D. C. Boffito, N. Saadatkhah, M. G. Rigamonti, G. S. Patience, Ultrasound assisted wet stirred media mill of high concentration LiFePO4 and catalysts, Can. J. Chem. Eng.:10.1002/cjce.23212.
27. Levulinic acid upgrade to succinic acid with hydrogen peroxide10.1016/j.apcata.2018.06.034 ↗
28. Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—bet, bjh, and dft10.1002/cjce.23632 ↗
29. Sing · Pure Appl. Chem. · 1985 · 57 · 60310.1351/pac198557040603 ↗
30. Instruments · 2015
31. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (iupac technical report)10.1515/pac-2014-1117 ↗
32. Gas-phase fructose conversion to furfural in a microfluidized bed reactor10.1021/acssuschemeng.8b00510 ↗
33. In situ high-resolution transmission electron microscopy synthesis observation of nanostructured carbon coated LiFePO410.1016/j.jpowsour.2011.04.003 ↗
34. Dna and carbon nanotubes as medicine10.1016/j.addr.2010.03.007 ↗
35. From mesoscale to nanoscale mechanics in single-wall carbon nanotubes10.1016/j.carbon.2017.07.036 ↗
36. Fabricating high-energy quantum dots in ultra-thin LiFePO4 nanosheets using a multifunctional high-energy biomolecule-atp10.1039/C3EE44187C ↗
37. Konsistenzmessungen von gummi-benzollösungen10.1007/BF01432034 ↗
38. Colloidal stabilization of nanoparticles in concentrated suspensions10.1021/la062042s ↗
39. On the solid-liquid transition of concentrated suspensions in transient shear flow10.1007/s00397-002-0227-1 ↗
40. Contribution to modeling the viscosity arrhenius-type equation for some solvents by statistical correlations analysis10.1016/j.fluid.2014.09.023 ↗
41. A new equation relating the viscosity arrhenius temperature and the activation energy for some Newtonian classical solvents10.1155/2015/163262 ↗
42. Viscometric study of aqueous poly(vinyl alcohol) (pva) solutions as a binder in adhesive formulations10.1163/156856106778456636 ↗
43. The rheology of suspensions of solid particles
44. Rheology of monodisperse latices10.1016/0001-8686(72)80001-0 ↗
45. Effect of nanoparticles/nanofluids on the rheology of heavy crude oil and its mobility on porous media at reservoir conditions10.1016/j.fuel.2016.07.013 ↗
46. Characterization of partially hydrolyzed poly(vinyl alcohol). effect of poly(vinyl alcohol) molecular architecture on aqueous phase conformation10.1021/ma030027d ↗
47. Water treatment: Mn-tio2 synthesized by ultrasound with increased aromatics adsorption10.1016/j.ultsonch.2018.01.023 ↗
48. Kinetics of ultrasonic polymer degradation: comparison of theoretical models with on-line data10.1002/macp.200700533 ↗
49. Boffito · 2016 · 931
50. Ultrasonic depolymerization of aqueous polyvinyl alcohol10.1016/S1350-4177(01)00086-4 ↗
51. Ultrasonic degradation of polymers: effect of operating parameters and intensification using additives for carboxymethyl cellulose (cmc) and polyvinyl alcohol (pva)10.1016/j.ultsonch.2010.11.002 ↗
52. Calculation of the rate constant for the ultrasonic degradation of aqueous solutions of polyvinyl alcohol by viscometry10.1016/S1350-4177(03)00110-X ↗
53. Advanced analysis of active material in li-ion battery by xps and aes
54. Enhanced photocatalytic activity of Pt_TiO2/WO3 hybrid material with energy storage ability10.1016/j.apcatb.2019.04.019 ↗
55. Systematic xps studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
56. Low temperature co catalytic oxidation and kinetic performances of KOH-hopcalite in the presence of CO210.1039/C5RA23806D ↗
57. Synthesis of LiFePO4/C cathode materials with both high-rate capability and high tap density for lithium-ion batteries10.1039/c0jm03331f ↗
58. An artificial lithium protective layer that enables the use of acetonitrile-based electrolytes in lithium metal batteries10.1002/anie.201801737 ↗
59. Control of the LiFePO4 electrochemical properties using low-cost iron precursor in a melt process10.1007/s10008-016-3324-2 ↗
60. A three-dimensional porous LiFePO4 cathode material modified with a nitrogen-doped graphene aerogel for high-power lithium ion batteries10.1039/C4EE03825H ↗