journal article·2019-10

Lithium-ion capacitor using rice husk-derived cathode and anode active materials adapted to uncontrolled full-pre-lithiation

Seiji Kumagai, Yusuke Abe, Tomoaki Saito, Takuya Eguchi, Masahiro Tomioka, Mahmudul Kabir, Daisuke Tashima

Publisher page

Abstract

Abstract Rice husk (RH), agricultural waste produced from rice harvest, is investigated as a potential source for cathode and anode active materials in lithium-ion capacitors (LICs). A carbonized mixture composed of pre-heated RH and beet sugar is subjected to silica removal via immersion in NaOH solution followed by activation using CO2 gas. This yields activated carbon with a specific surface area of 1801 m2 g−1 as the cathode active material. The anode active material is produced by carbonizing RH and partly removing 41 mass% of silica. The charge-discharge performances of a three-electrode LIC full-cell, using the RH-derived cathode and anode active materials with Li metal as the reference electrode, are evaluated under the uncontrolled full-pre-lithiation in comparison with similar three-electrode LIC full-cells using a commercial cathode and anode (graphite or hard carbon) active materials. The results of charge-discharge tests reveal that excellent rate and cycling stabilities are obtained from the LIC using RH-derived active materials in comparison with those using commercial active materials. Postmortem material characterizations suggest that the performance stability of the RH-derived LIC is attributed to the passivation ability of silica for excessive Li delivered via the full pre-lithiation process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Lithium ion capacitors in organic electrolyte system: scientific problems, material development, and key technologies10.1002/aenm.201801243 ↗
2. Nanostructured anode materials for non-aqueous lithium ion hybrid capacitors10.1002/eem2.12009 ↗
3. Ultrahigh-rate and high-density lithium-ion capacitors through hybriding nitrogen-enriched hierarchical porous carbon cathode with prelithiated microcrystalline graphite anode10.1016/j.nanoen.2015.03.001 ↗
4. Rate capability of graphite materials as negative electrodes in lithium-ion capacitors10.1016/j.electacta.2010.01.059 ↗
5. Effect of ball-milling on the rate and cycle-life performance of graphite as negative electrodes in lithium-ion capacitors10.1016/j.electacta.2011.06.060 ↗
6. Evaluation of lithium-ion capacitors assembled with pre-lithiated graphite anode and activated carbon10.1016/j.electacta.2012.01.076 ↗
7. Electrochemical performance of a hybrid lithium-ion capacitor with a graphite anode preloaded from lithium bis(trifluoromethane) sulfonimidebased electrolyte10.1016/j.electacta.2012.05.111 ↗
8. Use of sacrificial lithium nickel oxide for loading graphitic anode in Li-ion capacitors10.1016/j.electacta.2015.12.034 ↗
9. High performance lithium-ion hybrid capacitors with pre-lithiated hard carbon anodes and bifunctional cathode electrodes10.1016/j.jpowsour.2014.07.146 ↗
10. Different types of pre-lithiated hard carbon as negative electrode material for lithium-ion capacitors10.1016/j.electacta.2015.11.055 ↗
11. Electrochemical performance of lithium-ion capacitors evaluated under high temperature and high voltage stress using redox stable electrolytes and additives10.1016/j.jpowsour.2017.10.084 ↗
12. Electrochemical performances and capacity fading behaviors of activated carbon/hard carbon lithium ion capacitor10.1016/j.electacta.2017.03.110 ↗
13. High performance Li-ion capacitor laminate cells based on hard carbon/lithium stripes negative electrodes10.1149/2.0351702jes ↗
14. On the use of soft carbon and propylene carbonate-based electrolytes in lithium-ion capacitors10.1149/2.050208jes ↗
15. On the cycling stability of lithium-ion capacitors containing soft carbon as anodic material10.1016/j.jpowsour.2013.04.045 ↗
16. An asymmetric hybrid nonaqueous energy storage cell10.1149/1.1383553 ↗
17. Nanohybrid capacitor: the next generation electrochemical capacitors10.1002/fuce.201000041 ↗
18. Lithium-ion capacitors using carbide-derived carbon as the positive electrode – a comparison of cells with graphite and Li4Ti5O12 as the negative electrode10.1016/j.jpowsour.2016.09.010 ↗
19. Influence of sintering temperature and graphene additives on the electrochemical performance of porous Li4Ti5O12 anode for lithium ion capacitor10.1016/j.electacta.2017.07.014 ↗
20. All carbon based high energy lithium-ion capacitors from biomass: the role of crystallinity10.1016/j.jpowsour.2018.12.089 ↗
21. Li-insertion in hard carbon anode materials for Li-ion batteries10.1016/S0013-4686(99)00198-X ↗
22. Hard carbon: a promising lithium-ion battery anode for high temperature applications with ionic electrolyte10.1039/c2ra20536j ↗
23. Effect of carbon types on the electrochemical properties of negative electrodes for Li-ion capacitors10.1016/j.jpowsour.2011.08.081 ↗
24. Carbon nanotubes/amorphous carbon composites as high-power negative electrodes in lithium ion capacitors10.1007/s10800-013-0606-6 ↗
25. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
26. Research progress on silicon/carbon composite anode materials for lithium-ion battery10.1016/j.jechem.2017.12.012 ↗
27. Improvement of cycle behaviour of SiO/C anode composite by thermochemically generated Li4SiO4 inert phase for lithium batteries10.1016/j.jpowsour.2008.11.137 ↗
28. Study on polymer binders for high-capacity SiO negative electrode of Li-ion batteries10.1021/jp201691g ↗
29. Controlled prelithiation of silicon monoxide for high performance lithium-ion rechargeable full cells10.1021/acs.nanolett.5b03776 ↗
30. Systematic electrochemical characterizations of Si and SiO anodes for high-capacity Li-Ion batteries10.1016/j.jpowsour.2018.12.010 ↗
31. Electrochemical reduction of nano-SiO2 in hard carbon as anode material for lithium ion batteries10.1016/j.elecom.2008.09.032 ↗
32. Carbon-coated SiO2 nanoparticles as anode material for lithium ion batteries10.1016/j.jpowsour.2011.08.009 ↗
33. Stable cycling of SiO2 nanotubes as high-performance anodes for lithium-ion batteries10.1038/srep04605 ↗
34. SiO2@C hollow sphere anodes for lithium-ion batteries10.1016/j.jmst.2016.07.021 ↗
35. SiOx–graphite as negative for high energy Li-ion batteries10.1016/j.jpowsour.2011.02.018 ↗
36. Nano-sized SiOx/C composite anode for lithium ion batteries10.1016/j.jpowsour.2011.01.053 ↗
37. High performance amorphous-Si@SiOx/C composite anode materials for Li-ion batteries derived from ball-milling and in situ carbonization10.1016/j.jpowsour.2013.12.128 ↗
38. Metallurgically lithiated SiOx anode with high capacity and ambient air compatibility10.1073/pnas.1603810113 ↗
39. High-performance ball-milled SiOx anodes for lithium ion batteries10.1016/j.jpowsour.2016.11.044 ↗
40. A 29.3 Wh kg−1 and 6 kW kg−1 pouch-type lithium-ion capacitor based on SiOx/graphite composite anode10.1016/j.jpowsour.2018.12.090 ↗
41. Hollow porous SiO2 nanocubes towards high-performance anodes for lithium-ion batteries10.1038/srep01568 ↗
42. Effect of pre-lithiation degrees of mesocarbon microbeads anode on the electrochemical performance of lithium-ion capacitors10.1016/j.electacta.2014.01.040 ↗
43. Cycle performance of lithium-ion capacitors using graphite negative electrodes at different pre-lithiation levels10.1016/j.est.2015.05.005 ↗
44. Pre-lithiation strategies for rechargeable energy storage technologies: concepts, promises and challenges10.3390/batteries4010004 ↗
45. Understanding undesirable anode lithium plating issues in lithium-ion batteries10.1039/C6RA19482F ↗
46. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
47. An overview of global rice production, supply, trade, and consumption10.1111/nyas.12540 ↗
48. The utilization of rice husk silica as a catalyst: review and recent progress10.1016/j.cattod.2012.04.056 ↗
49. Ammonia gas adsorption by carbonized rice husk10.5188/ijsmer.13.92 ↗
50. Oil adsorbent produced by the carbonization of rice husks10.1016/j.wasman.2006.04.006 ↗
51. High-capacity carbons for lithium-ion batteries prepared from rice husk10.1016/S0378-7753(01)00504-3 ↗
52. Recycling rice husks for high-capacity lithium battery anodes10.1073/pnas.1305025110 ↗
53. Rice husks as a sustainable source of nanostructured silicon for high performance Li-ion battery anodes10.1038/srep01919 ↗
54. SiOx/C composite from rice husks as an anode material for lithium-ion batteries10.1016/j.electacta.2016.01.095 ↗
55. High surface area C/SiO2 composites from rice husks as a high-performance anode for lithium ion batteries10.1016/j.powtec.2017.01.083 ↗
56. Rice husk-originating silicon-graphite composites for advanced lithium ion battery anodes10.1186/s40580-017-0118-x ↗
57. Versatile nanostructures from rice husk biomass for energy applications10.1002/anie.201802050 ↗
58. Rice husk-derived carbon anodes for lithium ion batteries10.1039/c3ta10650k ↗
59. Rice husk-derived porous carbons with high capacitance by ZnCl2 activation for supercapacitors10.1016/j.electacta.2013.05.050 ↗
60. Nanoporous rice husk derived carbon for gas storage and high performance electrochemical energy storage10.1007/s10934-014-9833-4 ↗
61. Porous carbon made from rice husk as electrode material for electrochemical double layer capacitor10.1016/j.apenergy.2014.12.070 ↗
62. Electrochemical performance of activated carbons prepared from rice husk in different types of non-aqueous electrolytes10.1016/j.biombioe.2015.09.021 ↗
63. A green technology for the preparation of high capacitance rice husk-based activated carbon10.1016/j.jclepro.2015.07.005 ↗
64. High surface area activated carbon from rice husk as a high performance supercapacitor electrode10.1016/j.electacta.2016.01.140 ↗
65. Rice-husk-derived hybrid lithium-ion capacitors with ultra-high energy10.1039/C7TA07088H ↗
66. Electrical double-layer capacitance of micro- and mesoporous activated carbon prepared from rice husk and beet sugar10.1016/j.electacta.2013.10.060 ↗
67. Dense microporous and mesoporous activated carbon produced from rice husk and beet sugar10.5188/ijsmer.17.24 ↗
68. Bansal · 2005
69. Electrochemical performance of microporous and mesoporous activated carbons in neat and diluted 1-ethyl-3-methylimidazolium tetrafluoroborate10.1016/j.jpowsour.2017.01.064 ↗
70. Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar10.1016/j.cej.2009.10.016 ↗
71. Removal of dibenzothiophenes in kerosene by adsorption on rice husk activated carbon10.1016/j.fuel.2009.03.016 ↗
72. Graphite surface disorder detection using in situ Raman microscopy10.1016/j.ssi.2006.03.032 ↗
73. Pre-lithiation design and lithium ion intercalation plateaus utilization of mesocarbon microbeads anode for lithium-ion capacitors10.1016/j.electacta.2015.09.074 ↗
74. How dynamic is the SEI?10.1016/j.jpowsour.2007.06.050 ↗
75. Study on solid-electrolyte-interphase of Si and C-coated Si electrodes in lithium cells10.1149/1.3032230 ↗
76. Improvement of irreversible behavior of SiO anodes for lithium ion batteries by a solid state reaction at high temperature10.1016/j.jpowsour.2016.02.025 ↗
77. Analysis of hard carbon for lithium-ion batteries by hard X-ray photoelectron spectroscopy10.1016/j.jpowsour.2013.05.160 ↗
78. Binding energy referencing for XPS in alkali metal-based battery materials research (I): basic model investigations10.1016/j.apsusc.2015.05.029 ↗
79. Effect of vinylene carbonate and fluoroethylene carbonate on SEI formation on graphitic anodes in Li-ion batteries10.1149/2.0021513jes ↗
80. Surface film formation on electrodes in a LiCoO2/graphite cell: a step by step XPS study10.1016/j.jpowsour.2007.06.033 ↗
81. An XPS/AES comparative study of the surface behaviour of nano-silicon anodes for Li-ion batteries10.1039/C3JA50362C ↗
82. Understanding the influence of electrolyte additives on the electrochemical performance and morphology evolution of silicon nanowire based lithium-ion battery anodes10.1016/j.jpowsour.2017.05.093 ↗
83. Binder-induced surface structure evolution effects on Li-ion battery performance10.1016/j.apsusc.2017.10.195 ↗
84. Electrochemically lithiated graphite characterised by photoelectron spectroscopy10.1016/S0378-7753(03)00277-5 ↗
85. Review–SEI: past, present and future10.1149/2.1441707jes ↗
86. Characterisation of the SEI formed on natural graphite in PC-based electrolytes10.1016/j.electacta.2004.06.006 ↗
87. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
88. Surface chemistry and morphology of the solid electrolyte interphase on silicon nanowire lithium-ion battery anodes10.1016/j.jpowsour.2009.01.007 ↗
89. Binding energy referencing for XPS in alkali metal-based battery materials research (II): application to complex composite electrodes10.3390/batteries4030036 ↗
90. Effect of prelithiation process for hard carbon negative electrode on the rate and cycling behaviors of lithium-ion batteries10.3390/batteries4040071 ↗