journal article·2019-10

Superior cycling life of Li–S batteries with high sulfur loading enabled by a bifunctional layered-MoO3 cathode

Ruihan Zhang, Maochun Wu, Xinzhuang Fan, Haoran Jiang, Tianshou Zhao

Publisher page

Abstract

Abstract The shuttle effect is a critical issue that prevents practical applications of high-energy-density lithium-sulfur batteries. Here, a bifunctional positive electrode formed by growing layered molybdenum trioxide nanoflakes onto carbon paper is developed to address this issue, which exhibits not only strong binding ability to anchor polysulfides, but also efficient catalytic activity towards polysulfides redox reactions. As a result, the electrode developed in this work enables a lithium-sulfur battery to achieve an initial capacity of 1145 mAh g−1 and a retention capacity of as high as 976 mAh g−1 after 1000 cycles with a high coulombic efficiency of 99.54% at 1 C. By contrast, the battery with the pristine carbon paper electrode suffers from a severe capacity decay from the 1st cycle (655 mAh g−1) to the 1000th cycle (256 mAh g−1) with a low coulombic efficiency of 89.4%. More strikingly, even with a higher sulfur loading of 8 mg cm−2, the lithium-sulfur battery with the molybdenum trioxide nanoflakes decorated carbon paper electrode still retains a high specific capacity of 581 mAh g−1 after 1000 cycles. These great improvements reveal that molybdenum trioxide is a promising electrode material to realize the practical application of lithium-sulfur batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced battery technologies research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Novel gel polymer electrolyte for high-performance lithium-sulfur batteries10.1016/j.nanoen.2016.02.008 ↗
2. Understanding the anchoring effect of two-dimensional layered materials for lithium-sulfur batteries10.1021/acs.nanolett.5b00367 ↗
3. More reliable lithium-sulfur batteries: status, solutions and prospects10.1002/adma.201606823 ↗
4. Stabilizing high sulfur loading Li–S batteries by chemisorption of polysulfide on three-dimensional current collector10.1016/j.nanoen.2016.10.049 ↗
5. Atomic-layer-deposition functionalized carbonized mesoporous wood fiber for high sulfur loading lithium sulfur batteries10.1021/acsami.7b01205 ↗
6. Structure–property relationships of organic electrolytes and their effects on Li/S battery performance10.1002/adma.201700449 ↗
7. Li–O2 and Li–S batteries with high energy storage
8. Confined sulfur in microporous carbon renders superior cycling stability in Li/S batteries10.1002/adfm.201500983 ↗
9. Copper-stabilized sulfur-microporous carbon cathodes for Li-S batteries10.1002/adfm.201304156 ↗
10. Manipulating electrolyte and solid electrolyte interphase to enable safe and efficient Li-S batteries10.1016/j.nanoen.2018.05.065 ↗
11. Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
12. A carbon-cotton cathode with ultrahigh-loading capability for statically and dynamically stable lithium-sulfur batteries10.1021/acsnano.6b06369 ↗
13. A flexible nanostructured sulphur-carbon nanotube cathode with high rate performance for Li-S batteries10.1039/c2ee22294a ↗
14. Carbon-sulfur composites for Li-S batteries: status and prospects10.1039/c3ta11045a ↗
15. In situ sulfur reduction and intercalation of graphite oxides for Li-S battery cathodes10.1002/aenm.201400482 ↗
16. Reverse microemulsion synthesis of sulfur/graphene composite for lithium/sulfur batteries10.1021/acsnano.7b03591 ↗
17. Review—the importance of chemical interactions between sulfur host materials and lithium polysulfides for advanced lithium-sulfur batteries10.1149/2.0171514jes ↗
18. Understanding the nature of absorption/adsorption in nanoporous polysulfide sorbents for the Li-S battery10.1021/jp304380j ↗
19. A simply effective double-coating cathode with MnO2 nanosheets/graphene as functionalized interlayer for high performance lithium-sulfur batteries10.1016/j.electacta.2016.04.135 ↗
20. Electronic and ionic co-conductive coating on the separator towards high-performance lithium-sulfur batteries10.1016/j.jpowsour.2015.11.109 ↗
21. Nanostructured metal oxides and sulfides for lithium-sulfur batteries10.1002/adma.201601759 ↗
22. Tuning transition metal oxide-sulfur interactions for long life lithium sulfur batteries: the “goldilocks” principle10.1002/aenm.201501636 ↗
23. Improved lithium-sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode-separator interface10.1039/C4EE01377H ↗
24. Padding molybdenum net with Graphite/MoO3 composite as a multi-functional interlayer enabling high-performance lithium-sulfur batteries10.1016/j.jpowsour.2018.07.017 ↗
25. Electrocatalysis on separator modified by molybdenum trioxide nanobelts for lithium–sulfur batteries10.1002/admi.201800243 ↗
26. An interwoven MoO3@CNT scaffold interlayer for high-performance lithium-sulfur batteries10.1039/C8TA01726C ↗
27. α-MoO3 spheres as effective polysulfides adsorbent for high sulfur content cathode in lithium-sulfur batteries10.1016/j.jpowsour.2018.08.055 ↗
28. Suppressing self-discharge and shuttle effect of lithium–sulfur batteries with V2O5-decorated carbon nanofiber interlayer10.1002/smll.201602539 ↗
29. Tailoring surface acidity of metal oxide for better polysulfide entrapment in Li-S batteries10.1002/adfm.201602264 ↗
30. Advanced lithium–sulfur batteries enabled by a bio-inspired polysulfide adsorptive brush10.1002/adfm.201604069 ↗
31. Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium-sulfur batteries10.1002/anie.201410174 ↗
32. Long-life lithium–sulfur batteries with a bifunctional cathode substrate configured with boron carbide nanowires10.1002/adma.201804149 ↗
33. SnS2- compared to SnO2-stabilized S/C composites toward high-performance lithium sulfur batteries10.1021/acsami.6b06565 ↗
34. Pyrite FeS2 as an efficient adsorbent of lithium polysulphide for improved lithium-sulphur batteries10.1039/C6TA01214K ↗
35. A graphene-like metallic cathode host for long-life and high-loading lithium-sulfur batteries10.1039/C5MH00246J ↗
36. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts10.1021/acs.nanolett.5b04166 ↗
37. On the crystal structure of molybdenum trioxide10.3891/acta.chem.scand.04-0793 ↗
38. Catalytic properties of MoO3 revisited10.1016/S0920-5861(96)00107-1 ↗
39. P doped MoO3−x nanosheets as efficient and stable electrocatalysts for hydrogen evolution
40. Ammonolyzed MoO3 nanobelts as novel cathode material of rechargeable Li-ion batteries10.1002/aenm.201200692 ↗
41. Self-catalyzed decomposition of discharge products on the oxygen vacancy sites of MoO3 nanosheets for low-overpotential Li-O2 batteries10.1016/j.nanoen.2017.04.038 ↗
42. Modification based on MoO3 as electrocatalysts for high power density vanadium redox flow batteries10.1002/celc.201700376 ↗
43. Yury gogotsi, MoS2 nanosheets vertically aligned on carbon paper: a freestanding electrode for highly reversible sodium-ion batteries10.1002/aenm.201502161 ↗
44. Nanoscale insights into the hydrogenation process of layered α-MoO310.1021/acsnano.5b07420 ↗
45. Fast synthesis of α-MoO3 nanorods with controlled aspect ratios and their enhanced lithium storage capabilities10.1021/jp1017482 ↗
46. In-situ Raman investigation of polysulfide formation in Li-S cells10.1149/2.045308jes ↗
47. In situ Raman spectroscopy of sulfur speciation in lithium-sulfur batteries10.1021/am5072942 ↗
48. Electrochemical reactions of lithium-sulfur batteries: an analytical study using the organic conversion technique10.1039/C4CP00958D ↗
49. Raman study of cation effect on sulfate vibration modes in solid state and in aqueous solutions10.1002/jrs.4374 ↗
50. Studies on the effect of Li2SO4 on the structure of lithium borate glasses10.1021/jp982930z ↗
51. X-ray photoelectron spectroscopy characterization of amorphous molybdenum oxysulfide thin films10.1016/0040-6090(94)06383-4 ↗
52. Synthesis of h- and α-MoO3 by refluxing and calcination combination: phase and morphology transformation, photocatalysis, and photosensitization10.1155/2013/702679 ↗