journal article·2017-07

In-plane structuring of proton exchange membrane fuel cell cathodes: Effect of ionomer equivalent weight structuring on performance and current density distribution

Susanne Herden, Felix Riewald, Julian A. Hirschfeld, Markus Perchthaler

Publisher page

Abstract

Abstract Within the active area of a fuel cell inhomogeneous operating conditions occur, however, state of the art electrodes are homogenous over the complete active area. This study uses current density distribution measurements to analyze which ionomer equivalent weight (EW) shows locally the highest current densities. With this information a segmented cathode electrode is manufactured by decal transfer. The segmented electrode shows better performance especially at high current densities compared to homogenous electrodes. Furthermore this segmented catalyst coated membrane (CCM) performs optimal in wet as well as dry conditions, both operating conditions arise in automotive fuel cell applications. Thus, cathode electrodes with an optimized ionomer EW distribution might have a significant impact on future automotive fuel cell development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Review—electromobility: batteries or fuel cells?10.1149/2.0211514jes ↗
2. Study by electron microscopy of proton exchange membrane fuel cell membrane-electrode assembly degradation mechanisms: influence of local conditions10.1016/j.jpowsour.2012.03.096 ↗
3. Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell10.1016/j.jpowsour.2009.12.016 ↗
4. Measurement of current distribution in a proton exchange membrane fuel cell with various flow arrangements – a parametric study10.1016/j.apenergy.2011.05.033 ↗
5. The effects of operating temperature on current density distribution and impedance spectroscopy by segmented fuel cell10.1016/j.ijhydene.2013.01.099 ↗
6. Effect of operating conditions on current density distribution and high frequency resistance in a segmented PEM fuel cell10.1016/j.ijhydene.2012.02.024 ↗
7. Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions10.1016/j.jpowsour.2015.07.069 ↗
8. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review10.1016/j.ijhydene.2012.07.076 ↗
9. Current density and catalyst-coated membrane resistance distribution of hydro-formed metallic bipolar plate fuel cell short stack with 250 cm2 active area10.1016/j.jpowsour.2015.09.118 ↗
10. Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor10.1016/j.ijhydene.2012.05.008 ↗
11. Review of bipolar plates in pem fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
12. Study of flow channel geometry using current distribution measurement in a high temperature polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2010.10.017 ↗
13. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
14. feasibility of in-plane GDL structuration: impact on current density distribution in large-area proton exchange membrane fuel cells10.1016/j.jpowsour.2015.09.043 ↗
15. Design of a proton exchange membrane (PEM) fuel cell with variable catalyst loading10.1016/j.jpowsour.2015.05.002 ↗
16. Investigation of a polymer electrolyte membrane fuel cell catalyst layer with bidirectionally-graded composition10.1016/j.jpowsour.2014.07.148 ↗
17. Thin-film catalyst layers for polymer electrolyte fuel cell electrodes10.1007/BF01093004 ↗
18. The effects of relative humidity on the performances of pemfc meas with various nafion® ionomer contents10.1016/j.ijhydene.2010.04.082 ↗
19. Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC10.1016/S0378-7753(98)00186-4 ↗
20. Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance10.1023/A:1017547112282 ↗
21. Proton conduction in pem fuel cell cathodes: effects of electrode thickness and ionomer equivalent weight10.1149/1.3435323 ↗
22. Proton conduction and oxygen reduction kinetics in pem fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity10.1149/1.3143965 ↗
23. Functionally graded cathode catalyst layers for polymer electrolyte fuel cells: I. Theoretical modeling10.1149/1.1753580 ↗
24. Functionally graded cathode catalyst layers for polymer electrolyte fuel cells10.1149/1.1904990 ↗
25. Kraume · 2007
26. A novel scheme for precise diagnostics and effective stabilization of currents in a fuel cell stack10.1002/er.1662 ↗