journal article·2016-11

High-rate layered lithium-rich cathode nanomaterials for lithium-ion batteries synthesized with the assist of carbon spheres templates

Linjing Zhang, Jiuchun Jiang, Caiping Zhang, Borong Wu, Feng Wu

Publisher page

Abstract

Abstract Nanoparticles of the layered lithium-rich cathode, Li[Li 0.2 Ni 0.2 Mn 0.6 ]O 2 , have been synthesized via the two-step hydrothermal reactions combined with calcination process, while carbon spheres were used as templates. In the first hydrothermal step, the carbon spheres templates are obtained, and then the Li[Li 0.2 Ni 0.2 Mn 0.6 ]O 2 materials are prepared during the second hydrothermal step with addition of 0, 5, 10, 15 wt% as-prepared carbon spheres. Structural and morphological characterizations indicate the well-ordered layer-structured lithium-rich nanomaterials can be obtained with adding proper amount of carbon spheres templates. The electrochemical test demonstrates that the sample added 10 wt% carbon spheres (LNMO-Cs10) exhibits the best performance among all the samples. It delivers the optimal cycling ability, the least voltage decay, and the maximal discharge capacities of 238.7, 219.3, 204.8 and 182.7 mAh g −1 at 1C, 2C, 5C and 10C rates, respectively. EIS test shows that the LNMO-Cs10 material also has the reduced solid-electrolyte-interface resistance and charge transfer resistance. The excellent cycling ability and rate capability are possibly attributed to the better dispersibility of the nanoparticles with adding adequate amount of carbon spheres templates during materials synthesis. It can both guarantee the good contact between electrode and electrolytes and prevent high aggregation of nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
3. Investigations on electrochemical behavior and structural stability of Li1.2Mn0.54Ni0.13Co0.13O2 lithium-ion cathodes via in-situ and ex-situ raman spectroscopy10.1021/jp501777v ↗
4. High-resolution X-ray diffraction, DIFFaX, NMR and first principles study of disorder in the Li2MnO3-Li[Ni1/2Mn1/2]O2 solid solution10.1016/j.jssc.2005.05.027 ↗
5. Preparation and characterization of size-uniform Li[Li0.131Ni0.304Mn0.565]O2 particles as cathode materials for high energy lithium ion battery10.1016/j.jpowsour.2012.12.050 ↗
6. Electrochemical and structural study of the layered, “Li-excess” lithium-ion battery electrode material Li[Li1/9Ni1/3Mn5/9]O210.1021/cm900279u ↗
7. Evolutions of Li1.2Mn0.61Ni0.18Mg0.01O2 during the initial charge/discharge cycle studied by advanced electron microscopy10.1021/cm301140g ↗
8. Initial coulombic efficiency improvement of the Li1.2Mn0.567Ni0.166Co0.067O2 lithium-rich material by ruthenium substitution for manganese10.1039/c2jm33484d ↗
9. Electrochemical and thermal studies of Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 (x = 1/12, 1/4, 5/12, and 1/2)10.1016/j.electacta.2005.02.031 ↗
10. High capacity Li[Li0.2Ni0.2Mn0.6]O2 cathode materials via a carbonate co-precipitation method10.1016/j.jpowsour.2006.07.064 ↗
11. Structural evolution of layered Li1.2Ni0.2Mn0.6O2 upon electrochemical cycling in a Li rechargeable battery10.1039/c0jm01971b ↗
12. Local structure and composition studies of Li1.2Ni0.2Mn0.6O2 by analytical electron microscopy10.1016/j.jpowsour.2007.11.077 ↗
13. Modulating the Li+/Ni2+ replacement and electrochemical performance optimizing of layered lithium-rich Li1.2Ni0.2Mn0.6O2 by minor Co dopant10.1039/C4TA01217H ↗
14. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
15. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
16. Evolution of lattice structure and chemical composition of the surface reconstruction layer in Li1.2Ni0.2Mn0.6O2 cathode material for lithium ion batteries10.1021/nl5038598 ↗
17. Layered Li[Li0.2Ni0.15+0.5zCo0.1Mn0.55-0.5z]O2-zFz cathode materials for Li-ion secondary batteries10.1016/j.jpowsour.2005.03.152 ↗
18. Effect of niobium doping on the microstructure and electrochemical properties of lithium-rich layered Li[Li0.2Ni0.2Mn0.6]O2 as cathode materials for lithium ion batteries10.1039/C5RA01798J ↗
19. Magnesium-doped Li1.2[Co0.13Ni0.13Mn0.54]O2 for lithium-ion battery cathode with enhanced cycling stability and rate capability10.1021/acsami.5b03125 ↗
20. Effect of carbon coating on electrochemical performance of Li1.048Mn0.381Ni0.286Co0.286O2 cathode material for lithium-ion batteries10.1016/j.electacta.2011.12.082 ↗
21. Cerium fluoride coated layered oxide Li1.2Mn0.54Ni0.13Co0.13O2 as cathode materials with improved electrochemical performance for lithium ion batteries10.1016/j.jpowsour.2014.05.122 ↗
22. Facile synthesis and enhanced electrochemical performances of Li2TiO3-coated lithium-rich layered Li1.13Ni0.30Mn0.57O2 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2015.06.059 ↗
23. Macroporous Li(Ni1/3Co1/3Mn1/3)O2: a high-power and high-energy cathode for rechargeable lithium batteries10.1002/adma.200600958 ↗
24. Rod-like hierarchical nano/micro Li1.2Ni0.2Mn0.6O2 as high performance cathode materials for lithium-ion batteries10.1016/j.jpowsour.2013.05.019 ↗
25. Hierarchically porous micro-rod lithium-rich cathode material Li1.2Ni0.13Mn0.54Co0.13O2 for high performance lithium-ion batteries10.1016/j.electacta.2013.11.186 ↗
26. Sphere-shaped hierarchical cathode with enhanced growth of nanocrystal planes for high-rate and cycling-stable Li-ion batteries10.1021/nl5041594 ↗
27. Optimal microwave-assisted hydrothermal synthesis of nanosized xLi2MnO3·(1−x)LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion battery10.1016/j.jpowsour.2013.08.097 ↗
28. Structural stability of chemically delithiated layered (1−z)Li[Li1/3Mn2/3]O2−zLi[Mn0.5−yNi0.5−yCo2y]O2 solid solution cathodes10.1016/j.jpowsour.2008.05.028 ↗
29. Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries10.1039/b417616m ↗
30. Layered cathode materials Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 for lithium-ion batteries10.1149/1.1407994 ↗
31. Synthesis, structure, and electrochemical behavior of Li[NixLi1/3−2x/3Mn2/3−x/3]O210.1149/1.1471541 ↗
32. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
33. High rate capability caused by surface cubic spinels in Li-rich layer-structured cathodes for Li-ion batteries10.1038/srep03094 ↗
34. Graphene-based surface modification on layered Li-rich cathode for high-performance Li-ion batteries10.1039/c3ta11580a ↗
35. Improved rate capability in a high-capacity layered cathode material via thermal reduction10.1149/1.3597655 ↗
36. Enhanced electrochemical performance of Li[Li0.2Ni0.2Mn0.6]O2 modified by manganese oxide coating for lithium-ion batteries10.1149/1.3496402 ↗
37. Effect of morphology and manganese valence on the voltage fade and capacity retention of Li[Li2/12Ni3/12Mn7/12]O210.1021/am504701s ↗
38. Understanding the role of NH4F and Al2O3 surface Co-modification on lithium-excess layered oxide Li1.2Ni0.2Mn0.6O210.1021/acsami.5b04932 ↗
39. Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries10.1039/C5EE03573B ↗
40. Synthesis, characterization and electrochemistry of lithium battery electrodes: xLi2MnO3·(1−x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7)10.1021/cm801245r ↗
41. Synthesis and electrochemical properties of nanocrystalline Li[NixLi(1−2x)/3Mn(2−x)/3]O2 prepared by a simple combustion method10.1039/B311888F ↗
42. Structural evolution and the capacity fade mechanism upon long-term cycling in Li-rich cathode material10.1039/c2cp42068f ↗