journal article·2016-09

Electrochemical in-situ dissolution study of structurally ordered, disordered and gold doped PtCu3 nanoparticles on carbon composites

Primož Jovanovič, Vid Simon Šelih, Martin Šala, Samo B. Hočevar, Andraž Pavlišič, Matija Gatalo, Marjan Bele, Francisco Ruiz-Zepeda, Miha Čekada, Nejc Hodnik, Miran Gaberšček

Publisher page

Abstract

Abstract Commercial deployment of low-temperature-fuel cells is still hugely restricted by platinum alloy catalysts corrosion. Extensive research of the last years is focused on increasing stability of the catalyst composite, however a comprehensive understanding is still lacking. In pursuing this fundamentally and practically very important objective we present a comparative corrosion study of a PtCu 3 nano-alloy system by investigating the effects of structural ordering and gold doping. For that purpose a recently developed electrochemical flow cell (EFC) coupled to inductively coupled plasma mass spectrometer (ICP-MS) is employed. This approach provides potential- and time-resolved insight into dissolution process at extremely low concentrations (ppb level). Our results show a structure-dependent copper corrosion, where ordering and gold-doping significantly improve copper retention in the native alloy. Two assumptions can be drawn from the measured Pt dissolution profiles: (i) a better Pt re-deposition efficiency in catalysts with higher porosity and (ii) the beneficial effect of Au surface doping that lowers the amount of dissolved Pt amount and shifts the Pt cathodic dissolution to lower potentials. A 2.6 nm Pt/C standard catalyst with the same carbon loading shows a much lower stability which is due to the well-known particle size effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Recent advances in the stabilization of platinum electrocatalysts for fuel-cell reactions10.1002/cctc.201300647 ↗
2. I. Katsounaros, S. Cherevko, A.R. Zeradjanin, J.J. Karl, K.J.J. Mayrhofer, Oxygen electrochemistry as a cornerstone for sustainable energy conversion, 200 (n.d.) 1–20. doi:10.1002/anie.200)).
3. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
4. Severe accelerated degradation of PEMFC platinum catalyst: a thin film IL-SEM study10.1016/j.elecom.2013.02.012 ↗
5. Degradation mechanisms of Pt/C fuel cell catalysts under simulated start-stop conditions10.1021/cs300024h ↗
6. Dissolution of platinum: limits for the deployment of electrochemical energy conversion?10.1002/anie.201207256 ↗
7. SEM method for direct visual tracking of nanoscale morphological changes of platinum based electrocatalysts on fixed locations upon electrochemical or thermal treatments10.1016/j.ultramic.2014.02.006 ↗
8. Time evolution of the stability and oxygen reduction reaction activity of ptcu/c nanoparticles10.1002/cctc.201300287 ↗
9. New insight into platinum dissolution from nanoparticulate platinum-based electrocatalysts using highly sensitive in situ concentration measurements10.1002/cctc.201300936 ↗
10. Pourbaix · 1966
11. Effect of ordering of PtCu3 nanoparticle structure on the activity and stability for the oxygen reduction reaction10.1039/C4CP00585F ↗
12. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs10.1016/j.apcatb.2004.06.021 ↗
13. Understanding the electrocatalysis of oxygen reduction on platinum and its alloys10.1039/c2ee03590a ↗
14. Stabilization of platinum oxygen-reduction electrocatalysts using gold clusters10.1126/science.1134569 ↗
15. Design and synthesis of degradation-resistant core–shell catalysts for proton exchange membrane fuel cells10.1016/j.jpowsour.2014.03.102 ↗
16. Positive effect of surface doping with Au on the stability of Pt-Based electrocatalysts10.1021/acscatal.5b02883 ↗
17. Effect of gold subsurface layer on the surface activity and segregation in Pt/Au/Pt3M (where M = 3d transition metals) alloy catalyst from first-principles10.1063/1.4905919 ↗
18. The influence of chloride impurities on Pt/C fuel cell catalyst corrosion10.1039/C4CC00086B ↗
19. A highly active PtCu 3 intermetallic core–shell, multilayered Pt-skin, carbon embedded electrocatalyst produced by a scale-up sol–gel synthesis10.1039/C4CC05637J ↗
20. New Pt-skin electrocatalysts for oxygen reduction and methanol oxidation reactions10.1016/j.elecom.2012.07.024 ↗
21. New insights into corrosion of ruthenium and ruthenium oxide nanoparticles in acidic media10.1021/acs.jpcc.5b01832 ↗
22. The stability challenge on the pathway to low and ultra-low platinum loading for oxygen reduction in fuel cells10.1002/celc.201500425 ↗
23. Platinum-alloy cathode catalyst degradation in proton exchange membrane fuel cells: nanometer-scale compositional and morphological changes10.1149/1.3258275 ↗
24. Voltammetric surface dealloying of Pt bimetallic nanoparticles: an experimental and DFT computational analysis10.1039/b803717e ↗
25. An atomistic description of dealloying10.1149/1.1784820 ↗
26. Potential-resolved dissolution of Pt-Cu: a thin-film material library study10.1016/j.electacta.2014.07.113 ↗
27. Stabilized nanoporous metals by dealloying ternary alloy precursors10.1002/adma.200702760 ↗
28. Electrochemical dissolution of gold in acidic medium10.1016/j.elecom.2012.11.040 ↗
29. Towards a comprehensive understanding of platinum dissolution in acidic media10.1039/C3SC52411F ↗
30. Dissolution of platinum in the operational range of fuel cells
31. Electrochemical stability of nanometer-scale Pt particles10.1021/ja9071496 ↗
32. Electrochemical stability of elemental metal nanoparticles10.1021/ja104421t ↗
33. Finding optimal surface sites on heterogeneous catalysts by counting nearest neighbors10.1126/science.aab3501 ↗
34. Structural effects on trends in the deposition and dissolution of metal-supported metal adstructures10.1016/j.electacta.2010.04.055 ↗
35. Multimetallic Au/FePt 3 nanoparticles as highly durable electrocatalyst10.1021/nl102369k ↗
36. Multimetallic core/interlayer/shell nanostructures as advanced electrocatalysts10.1021/nl5028205 ↗