Enhanced lithium ion storage in TiO2 nanoparticles, induced by sulphur and carbon co-doping
Source abstract
Abstract
Abstract Sulphur and carbon codoped anatase nanoparticles are synthesized by one-step approach based on interaction between thiourea and metatitanic acid. Electron microscopy shows micrometer-sized randomly distributed crystal aggregates, consisting of many 25–40 nm TiO 2 nanoparticles. The obtained phase composition and chemical states of the elements in the structure are analyzed by means of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). XRD shows that after doping the tetragonal anatase structure is preserved. Further data assessment by Rietveld refinement allows detection of a slight increase of the c lattice parameter and volume related to incorporation of the doping elements. XPS confirms the coexistence of both elemental and oxide carbon forms, which are predominantly located on the TiO 2 particle surface. According to XPS analysis sulphur occupies titanium sites and the element is present in S 6+ sulfate environment. Analysis based on cyclic voltammetry and galvanostatic intermittent titration (GITT) suggests an accelerated Li + transport in the doped TiO 2 structure. The synthesized S and C co-doped anatase has an excellent electrochemical performance in terms of capacity and very fast lithiation kinetics, superior to the non-doped TiO 2 . The material displays 83% capacity retention for 500 galvanostatic cycles and nearly 100% current efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Performance of titanium dioxide-based cathodes in a lithium polymer electrolyte cell10.1016/0167-2738(92)90449-Y ↗
2. Spatial extent of lithium intercalation in anatase TiO210.1021/jp9909964 ↗
3. lithium storage in nanostructured TiO2 made by hydrothermal growth10.1021/cm035046g ↗
4. The life and times of lithium in anatase TiO210.1016/j.ssi.2003.11.030 ↗
5. Ti-based compounds as anode materials for Li-ion batteries10.1039/c2ee03410g ↗
6. The preparation of highly ordered TiO2 nanotube arrays by an anodization method and their applications10.1039/c2cc30733b ↗
7. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
8. Nanostructured negative electrodes based on titania for Li-ion microbatteries10.1039/c0jm04205f ↗
9. Li-ion batteries from LiFePO4 cathode and anatase/graphene composite anode for stationary energy storage10.1016/j.elecom.2009.12.039 ↗
10. Dominant factors governing the rate capability of a TiO2 nanotube anode for high power lithium ion batteries10.1021/nn303002u ↗
11. Green energy storage materials: nanostructured TiO2 and Sn-based anodes for lithium-ion batteries10.1039/b823474d ↗
12. Preparation of carbon-coated TiO2 nanostructures for lithium-ion batteries10.1016/j.electacta.2011.03.119 ↗
13. Preparation and electrochemical properties of carbon-doped TiO2 nanotubes as an anode material for lithium-ion batteries10.1016/j.jpowsour.2007.10.014 ↗
14. Carbon treated self-ordered TiO2 nanotube arrays with enhanced lithium-ion intercalation performance10.1016/j.jallcom.2014.02.013 ↗
15. Bi · J. Mater. Chem. A · 2014 · 2 · 181810.1039/C3TA14535B ↗
16. Improvements in the electrochemical kinetic properties and rate capability of anatase titanium dioxide nanoparticles by nitrogen doping10.1021/am5002053 ↗
17. Synthesis and electrochemical performance of hierarchically porous N-doped TiO2 for Li-ion batteries10.1039/c3nj01332d ↗
18. Understanding the fast lithium storage performance of hydrogenated TiO2 nanoparticles10.1039/c3ta13491a ↗
19. Niobium doped TiO2 with mesoporosity and its application for lithium insertion10.1021/cm1020977 ↗
20. Enhanced electron transport in Nb-doped TiO2 nanoparticles via pressure-induced phase transitions10.1021/ja410810w ↗
21. Effect of Sn-doping on the electrochemical behaviour of TiO2 nanotubes as potential negative electrode materials for 3D Li-ion micro batteries10.1016/j.jpowsour.2012.09.104 ↗
22. Improved electrochemical properties of Sn-doped TiO2 nanotube as an anode material for lithium ion battery10.1007/s10008-014-2436-9 ↗
23. Improving the electrochemical performance of anatase titanium dioxide by vanadium doping as an anode material for lithium-ion batteries10.1016/j.jpowsour.2013.06.080 ↗
24. Second-generation photocatalytic materials: anion-doped TiO210.1088/0953-8984/18/2/006 ↗
25. Band gap narrowing of titanium dioxide by sulfur doping10.1063/1.1493647 ↗
26. S-, N and C – doped titanium dioxide nanoparticles: synthesis, characterization and redox charge transfer study
27. High-rate lithium storage of anatase TiO2 crystals doped with both nitrogen and sulfur10.1039/c3cc40568k ↗
28. TiO2 as an active or supplemental material for lithium batteries10.1039/C5TA06888F ↗
29. The effects of n-type doping on lithium storage in TiO210.1039/C5CP07907A ↗
30. High power TiO2 and high capacity Sn-doped TiO2 nanomaterial anodes for lithium-ion batteries10.1016/j.jpowsour.2015.06.039 ↗
31. Anionic or cationic S-Doping in bulk anatase TiO2: insights on optical absorption from first principles calculations10.1021/jp312197g ↗
32. Synergistic effects of nonmetal co-doping with sulfur in anatase TiO2: a DFT + U study10.1039/C4CP05065G ↗
33. Morphology and surface electronic structure of MBE grown InN10.1016/j.jcrysgro.2007.04.014 ↗
34. Atomic subshell photoionization cross sections and asymmetry parameters: 1 Z 10310.1016/0092-640X(85)90016-6 ↗
35. Synthesis, characterization, photocatalytic properties of sulfur- and carbon-codoped TiO2 nanoparticles10.1186/s11671-016-1353-5 ↗
36. Fieser · 1974 · vol. 4 · 456
37. Preparation and characterization of visible-light-driven carbon-sulfur-codoped TiO2 photocatalysts10.1021/ie060350f ↗
38. Analysis of sulfur modification mechanism for anatase and rutile TiO2 by different doping modes based on GGA + U calculations10.1039/C4RA03891F ↗
39. Photoelectron spectroscopic investigation of nitrogen-doped titania nanoparticles10.1021/jp0469160 ↗
40. Synthesis, characterization, electronic structure, and photocatalytic activity of nitrogen-doped TiO2 nanocatalyst10.1021/cm052047v ↗
41. Chemical derivatization in electron spectroscopy for chemical analysis of surface functional groups introduced on low-density polyethylene film10.1021/ac00227a022 ↗
42. C-doped hollow TiO spheres: in situ synthesis, controlled shell 2 thickness, and superior visible-light photocatalytic activity10.1016/j.apcatb.2014.10.063 ↗
43. A simple two-step template approach for preparing carbon-doped mesoporous TiO2 hollow microspheres10.1021/jp9047693 ↗
44. N, S co-doped-TiO2/fly ash beads composite material and visible light photocatalytic activity10.1016/j.apsusc.2013.07.086 ↗
45. Fullerene core star-like polymers—1. Preparation from fullerenes and monoazidopolyethers10.1016/S0014-3057(97)00225-5 ↗
46. Accounting for nanometer-thick adventitious carbon contamination in x-ray absorption spectra of carbon-based materials10.1021/ac503409c ↗
47. An insight toward the photocatalytic activity of S doped 1-D TiO2 nanorods prepared via novel route: As promising platform for environmental leap10.1016/j.molcata.2015.12.002 ↗
48. Fabrication and enhanced visible-light photocatalytic activity of carbon self-doped TiO2 sheets with exposed {001} facets10.1039/C0JM02217A ↗
49. Preparation of S-doped TiO2 photocatalysts and their photocatalytic activities under visible light10.1016/j.apcata.2004.01.007 ↗
50. Luo · 2007
51. Enhanced visible light photocatalytic activity of N-doped TiO2 in relation to single-electron-trapped oxygen vacancy and doped-nitrogen10.1016/j.apcatb.2010.07.015 ↗
52. Li+ insertion in TiO2 (Anatase). 2. Voltammetry on nanoporous films10.1021/jp970490q ↗
53. Li+ ion insertion in TiO2 (anatase). 1. Chronoamperometry on CVD films and nanoporous films10.1021/jp970489r ↗
54. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system LiSb10.1149/1.2133112 ↗
55. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes10.1038/nnano.2016.32 ↗
56. Boron-doped TiO2 materials for high-rate lithium ion batteries10.1016/j.jallcom.2014.03.069 ↗
57. Electrochemical behavior of anodically obtained titania nanotubes in organic carbonate and ionic liquid based Li ion containing electrolytes10.1016/j.electacta.2013.04.115 ↗