journal article·2016-06

Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films

Guerric Lemoine, Laurent Delannay, Hosni Idrissi, Marie-Stéphane Colla, Thomas Pardoen

Acta Materialia· Volume 111
Publisher page

Abstract

Abstract A dislocation-based crystal plasticity model is developed in order to study the mechanical and creep/relaxation behaviour of polycrystalline metallic thin films. The model accounts for the confinement of plasticity due to grain boundaries and for the anisotropy of individual grains, as well as for the significant viscoplastic effects associated to dislocation dominated thermally activated mechanisms. Numerical predictions are assessed based on experimental tensile test followed by relaxation on freestanding Pd films, based on an on-chip test technique. The dislocation-based mechanism assumption captures all the experimental trends, including the stress–strain response, the relaxation behaviour and the dislocation density evolution, confirming the dominance of a dislocation driven deformation mechanism for the present Pd films with high defects density. The model has also been used to address some original experimental evidences involving back stresses, Bauschinger effect, backward creep and strain recovery.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Creep as a reliability problem in MEMS10.1016/j.microrel.2004.07.066 ↗
2. Creep characterization of al alloy thin films for use in mems applications10.1016/j.mee.2004.07.045 ↗
3. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
4. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
5. Failure of metals III. Fracture and fatigue of nanostructured metallic materials10.1016/j.actamat.2015.07.049 ↗
6. Strain rate sensitivity of nanocrystalline Au films at room temperature10.1016/j.actamat.2010.04.048 ↗
7. Size and rate dependent necking in thin metallic films10.1016/j.jmps.2013.09.006 ↗
8. Internal and effective stresses in nanocrystalline electrodeposited Ni10.1063/1.2336726 ↗
9. Plastic deformation recovery in freestanding nanocrystalline aluminum and gold thin films10.1126/science.1137580 ↗
10. Deformation behavior in bulk nanocrystalline-ultrafine aluminum: in situ evidence of plastic strain recovery10.1016/j.scriptamat.2008.11.045 ↗
11. Mechanical behavior of nanocrystalline metals and alloys10.1016/j.actamat.2003.08.032 ↗
12. Micromechanical modelling of nanocrystalline and ultrafine grained metals: a short overview10.1016/j.commatsci.2014.09.024 ↗
13. Direct dynamic atomic mechanisms of strain-induced grain rotation in nanocrystalline, textured, columnar-structured thin gold films10.1016/j.scriptamat.2010.10.029 ↗
14. Deformation mechanisms in nanocrystalline palladium at large strains10.1016/j.actamat.2009.03.049 ↗
15. Increased strain rate sensitivity due to stress-coupled grain growth in nanocrystalline Al10.1016/j.scriptamat.2006.06.002 ↗
16. In situ TEM observations of fast grain-boundary motion in stressed nanocrystalline aluminum films10.1016/j.actamat.2008.03.032 ↗
17. Inter- and intragranular plasticity mechanisms in ultrafine-grained Al thin films: an in situ TEM study10.1016/j.actamat.2012.09.051 ↗
18. Experimental observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
19. Constitutive modeling of strain rate effects in nanocrystalline and ultrafine grained polycrystals10.1016/j.ijsolstr.2011.02.013 ↗
20. A micromechanical approach to the stress-strain relations, strain-rate sensitivity and activation volume of nanocrystalline materials10.1007/s10999-013-9214-1 ↗
21. Constitutive modelling of strength and plasticity of nanocrystalline metallic materials10.1016/S0921-5093(01)01246-1 ↗
22. Dislocation mediated plasticity in nanocrystalline Al: the strongest size10.1088/0965-0393/19/7/074005 ↗
23. Competing grain-boundary- and dislocation-mediated mechanisms in plastic strain recovery in nanocrystalline aluminum10.1073/pnas.0901765106 ↗
24. Grain size, grain boundary sliding, and grain boundary interaction effects on nanocrystalline behavior10.1016/j.msea.2009.05.012 ↗
25. The stress-strain response of nanocrystalline metals: a quantized crystal plasticity approach10.1016/j.actamat.2008.10.035 ↗
26. Gradient crystal plasticity modelling of anelastic effects in particle strengthened metallic thin films
27. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel10.1016/S1359-6454(03)00365-3 ↗
28. Transition of deformation mechanisms and its connection to grain size distribution in nanocrystalline metals10.1016/j.actamat.2005.06.033 ↗
29. Deformation mechanism transitions in nanoscale fcc metals10.1080/09500830310001614540 ↗
30. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
31. Deformation of electrodeposited nanocrystalline nickel10.1016/S1359-6454(02)00421-4 ↗
32. Dislocations in nanocrystalline grains10.1063/1.2210295 ↗
33. In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films10.1016/S1359-6454(02)00599-2 ↗
34. Nucleation and propagation of dislocations in nanocrystalline fcc metals10.1016/j.actamat.2005.12.026 ↗
35. Strong strain hardening in nanocrystalline nickel10.1103/PhysRevLett.103.205504 ↗
36. Direct observation of Lomer-Cottrell locks during strain hardening in nanocrystalline nickel by in situ TEM10.1038/srep01061 ↗
37. In Situ observation of dislocation behavior in nanometer grains10.1103/PhysRevLett.105.135501 ↗
38. Dislocation-mediated relaxation in nanograined columnar palladium films revealed by on-chip time-resolved HRTEM testing10.1038/ncomms6922 ↗
39. Mechanical properties of thin films
40. Strain gradient effect in nanoscale thin films10.1016/S1359-6454(03)00116-2 ↗
41. High strength-ductility of thin nanocrystalline palladium films with nanoscale twins: on-chip testing and grain aggregate model10.1016/j.actamat.2011.11.054 ↗
42. In situ TEM study of microplasticity and Bauschinger effect in nanocrystalline metals10.1016/j.actamat.2010.05.013 ↗
43. Bauschinger effect in unpassivated freestanding nanoscale metal films10.1016/j.scriptamat.2008.06.010 ↗
44. Effect of grain size distribution on plastic strain recovery10.1103/PhysRevB.82.054110 ↗
45. New on-chip nanomechanical testing laboratory – applications to aluminum and polysilicon thin films
46. On-chip stress relaxation testing method for freestanding thin film materials10.1063/1.4758288 ↗
47. Advanced TEM investigation of the plasticity mechanisms in nanocrystalline freestanding palladium films with nanoscale twins10.1016/j.ijplas.2012.04.003 ↗
48. Colla · 2014
49. Ultrahigh strain hardening in thin palladium films with nanoscale twins10.1002/adma.201004160 ↗
50. On-chip fracture testing of freestanding nanoscale materials10.1016/j.engfracmech.2015.07.006 ↗
51. A variational multiscale constitutive model for nanocrystalline materials10.1016/j.jmps.2010.10.010 ↗
52. Effects of grain size distribution on the mechanical response of nanocrystalline metals: part II10.1016/j.actamat.2006.03.022 ↗
53. Realistic constitutive relations for metal plasticity10.1016/S0921-5093(01)01174-1 ↗
54. Kocks · 1975
55. Frost · 1982
56. Temperature dependence of dispersed barrier hardening10.1063/1.1656434 ↗
57. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
58. Effects of pre-strain on the compressive stress-strain response of Mo-alloy single-crystal micropillars10.1016/j.actamat.2008.05.030 ↗
59. Tensile strength of whiskers10.1063/1.1722294 ↗
60. Orientation and rate dependence of dislocation nucleation stress computed using molecular dynamics10.1016/j.scriptamat.2008.12.037 ↗
61. Atomistic simulations of homogeneous dislocation nucleation in single crystal copper10.1088/0965-0393/15/7/001 ↗
62. A model for the grain size dependent work hardening of copper10.1016/j.scriptamat.2006.05.018 ↗
63. Structureproperty optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model10.1016/j.actamat.2006.11.029 ↗
64. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
65. Deformation texture prediction: From the Taylor model to the advanced Lamel model10.1016/j.ijplas.2004.04.011 ↗
66. Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation10.1016/S0022-5096(02)00032-7 ↗
67. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
68. D. Bardel, O. Mishin, L. Delannay, Prediction of Through-thickness Heteroge- neity after Multi-pass Rolling of Aluminium Sheet, in preparation.
69. A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size10.1016/j.commatsci.2005.12.002 ↗
70. Activation volume and deviation from Cottrell-Stokes law at small grain size10.1016/j.ijplas.2009.10.003 ↗
71. Strain gradient plasticity analysis of the strength and ductility of thin metallic films using an enriched interface model10.1016/j.actamat.2010.05.021 ↗
72. Slip-induced intergranular stress redistribution in nanocrystalline Ni10.1016/j.actamat.2012.09.007 ↗
73. Separation of film thickness and grain boundary strengthening effects in Al thin films on Si10.1557/JMR.1992.2040 ↗
74. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
75. Nanocrystalline electrodeposited Ni: microstructure and tensile properties10.1016/S1359-6454(02)00198-2 ↗
76. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al10.1557/jmr.2011.156 ↗
77. A new method for reliable determination of strain-rate sensitivity of low-dimensional metallic materials by using nanoindentation10.1016/j.scriptamat.2013.12.022 ↗
78. Tensile properties of in situ consolidated nanocrystalline Cu10.1016/j.actamat.2004.12.005 ↗
79. Nano-sized twins induce high rate sensitivity of flow stress in pure copper10.1016/j.actamat.2005.01.031 ↗
80. Temperature and strain rate effects on the strength and ductility of nanostructured copper10.1063/1.1618370 ↗
81. Tensile behavior of free-standing gold films. Part II. Fine-grained films10.1016/S1359-6454(03)00007-7 ↗
82. Strain rate effects in the ultrafine grain and nanocrystalline regimesinfluence on some constitutive responses10.1007/s10853-006-0700-9 ↗
83. Caillard · 2003
84. Argon · 2008
85. Deformation mechanisms of nanograined metallic polycrystals10.1016/j.actamat.2010.12.035 ↗
86. Scale dependence of mechanical properties of single crystals under uniform deformation10.1016/j.scriptamat.2006.02.003 ↗
87. Texture-dependent twin formation in nanocrystalline thin Pd films10.1016/j.scriptamat.2012.01.038 ↗
88. Texture development in polycrystalline thin films10.1016/0921-5107(95)03011-5 ↗
89. Dynamic recovery in nanocrystalline Ni10.1016/j.actamat.2015.03.033 ↗
90. Freund · 2003