Numerical and experimental investigation into passive hydrogen recovery scheme using vacuum ejector
Source abstract
Abstract
Abstract The current work presents a numerical and experimental investigation into a passive ejector for recovering the anode off-gas in a proton exchange membrane fuel cell (PEMFC) system. The proposed ejector is consisted of a convergent-divergent channel and a suction channel, and it is connected with the anode outlet of PEMFC system for recovery the anode off-gas into the main gas supply. Numerical simulations based on a three-dimensional compressible steady-state k − ɛ turbulent model are performed to examine the effects of the inlet mass flow rate and nozzle throat diameter on the pressure, Mach number, temperature, suction channel mass flow rate, outlet channel mass flow rate, and suction channel entrainment ratio, respectively. The numerical results are confirmed by means of an experimental investigation. It is shown that supersonic flow conditions are induced in the ejector; resulting in the induction of a vacuum pressure in the suction channel and the subsequent recovery of the anode off-gas at the outlet of the main channel. In addition, it is shown that the mass flow rate in the suction channel increases with an increasing mass flow rate at the primary channel inlet. Finally, the results show that a higher entrainment ratio is obtained as the throat diameter of the nozzle in the ejector is reduced. Overall, the results presented in this study provide a useful source of reference for developing the ejector devices applied to fuel cell systems while simultaneously avoiding extra energy consumption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Refrigeration and Air Conditioning Technologies · Advanced Thermodynamic Systems and Engines · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Barbir · 2012
2. Fuel cell systems for transportation: status and trends10.1016/j.jpowsour.2007.10.026 ↗
3. Development of a lightweight fuel cell vehicle10.1016/j.jpowsour.2004.08.056 ↗
4. Carlson · 2005
5. GM Global Technology Operations LLC, US Patent 8129056 B2, 2012.
6. A 1-D analysis of ejector performance10.1016/S0140-7007(99)00004-3 ↗
7. Ejectors: applications in refrigeration technology10.1016/j.rser.2003.10.001 ↗
8. Numerical and experimental investigations on supersonic ejectors10.1016/j.ijheatfluidflow.2004.07.003 ↗
9. Investigation of entrainment behavior and characteristics of gas–liquid ejectors based on CFD simulation10.1016/j.ces.2010.10.041 ↗
10. Study of supersonic flow in a constant rate of momentum change (CRMC) ejector with frictional effects10.1016/j.applthermaleng.2013.06.045 ↗
11. Customized design for the ejector to recirculate a humidified hydrogen fuel in a submarine PEMFC10.1016/j.jpowsour.2007.08.069 ↗
12. Fuel ejector design and simulation model for anodic recirculation SOFC system10.1016/j.jpowsour.2007.08.036 ↗
13. Anode gas recirculation behavior of a fuel ejector in hybrid solid oxide fuel cell systems: performance evaluation in three operational modes10.1016/j.jpowsour.2008.07.027 ↗
14. Control oriented modeling of ejector in anode gas recirculation solid oxygen fuel cell systems10.1016/j.enconman.2010.11.012 ↗
15. Geometry optimization study of ejector in anode recirculation solid oxygen fuel cell system
16. Numerical modeling and analysis of ejector in the proton exchange membrane fuel cell system
17. New theoretical model for convergent nozzle ejector in the proton exchange membrane fuel cell system10.1016/j.jpowsour.2009.02.014 ↗
18. Vector evaluated particle swarm optimization (VEPSO) of supersonic ejector for hydrogen fuel cells10.1115/1.4000676 ↗
19. Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications10.1016/j.ijhydene.2011.11.116 ↗
20. Ejector design and performance evaluation for recirculation of anode gas in a micro combined heat and power systems based on solid oxide fuel cell10.1016/j.applthermaleng.2013.01.021 ↗
21. Passive hydrogen recovery schemes using a vacuum ejector in a proton exchange membrane fuel cell system10.1016/j.jpowsour.2013.08.126 ↗
22. Launder · 1972
23. Application of a Reynolds stress turbulence model to the compressible shear layer10.2514/3.10649 ↗
24. Patankar · 1980
25. The numerical computation of turbulent flows10.1016/0045-7825(74)90029-2 ↗