journal article·2022-03

Elucidating the role of anion-exchange ionomer conductivity within the cathode catalytic layer of anion-exchange membrane fuel cells

Karam Yassin, Igal G. Rasin, Simon Brandon, Dario R. Dekel

Publisher page

Abstract

The anion-exchange ionomer (AEI) is a crucial component of anion-exchange membrane fuel cells (AEMFCs). In this study, computational analysis is employed to study the unexplored and critical effect of AEI hydroxide conductivity, within the cathode electrode, on AEMFC performance and its stability. The cathode is of particular importance due to its tendency to dry-out in a manner that may impact ionomer conductivity during AEMFC operation. Our modeling results clearly show that enhanced AEI hydroxide conductivity, within the cathode, significantly increases AEMFC performance. Less intuitive is its positive impact on cell stability. Superior conductivity is associated with high catalyst utilization and a reduced potential drop across the cathode. This enhances hydration levels in the cathode resulting in slower degradation kinetics. While the cathode reaction kinetics is considered as a major factor restricting cell performance, the transport of water and hydroxide through the cathode catalyst layer is extremely critical to ensure long-term AEMFC performance stability. In addition, a two-step degradation mechanism is observed where initially the voltage loss is controlled by the cathode AEI degradation, and only later membrane degradation becomes dominant. These insights are critical for understanding cell operation and for the achievement of further progress in AEMFC performance stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
2. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
3. A review on recent developments of anion exchange membranes for fuel cells and redox flow batteries10.1039/C5RA04741B ↗
4. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
5. Anion exchange membrane fuel cells: current status and remaining challenges10.1016/j.jpowsour.2017.08.010 ↗
6. An anion-exchange membrane fuel cell containing only abundant and affordable materials10.1002/ente.202000909 ↗
7. Alkaline membrane fuel cell (AMFC) materials and system improvement - state-of-the-art10.1149/05002.2051ecst ↗
8. Electrocatalysis of oxygen reduction on heteroatom-doped nanocarbons and transition metal-nitrogen-carbon catalysts for alkaline membrane fuel cells10.1039/C7TA08690C ↗
9. Platinum and platinum group metal-free catalysts for anion exchange membrane fuel cells
10. Oxygen reduction reaction on silver catalysts in alkaline media: a minireview10.1002/celc.201800913 ↗
11. Iron- and nitrogen-doped graphene-based catalysts for fuel cell applications10.1002/celc.202000011 ↗
12. A highly-active, stable and low-cost platinum-free anode catalyst based on RuNi for hydroxide exchange membrane fuel cells10.1038/s41467-020-19413-5 ↗
13. Composite materials with combined electronic and ionic properties10.1016/j.matt.2019.04.007 ↗
14. High performance FeNC and Mn-oxide/FeNC layers for AEMFC cathodes10.1149/1945-7111/abb7e0 ↗
15. Self-crosslinked blend alkaline anion exchange membranes with bi-continuous phase separated morphology to enhance ion conductivity10.1016/j.memsci.2019.117769 ↗
16. Alkaline-stable anion exchange membranes: a review of synthetic approaches10.1016/j.progpolymsci.2019.101177 ↗
17. Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability10.1039/C7EE02053H ↗
18. ETFE-based anion-exchange membrane ionomer powders for alkaline membrane fuel cells: a first performance comparison of head-group chemistry10.1039/C8TA08309F ↗
19. Poly(norbornene) anion conductive membranes: homopolymer, block copolymer and random copolymer properties and performance10.1039/D0TA04756B ↗
20. High performance anion exchange ionomer for anion exchange membrane fuel cells10.1039/C7RA01980G ↗
21. Fukuta · 2011 · 1
22. Anion exchange polyelectrolytes for membranes and ionomers10.1016/j.progpolymsci.2020.101345 ↗
23. Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells10.1038/s41560-019-0372-8 ↗
24. Anionic multiblock copolymer membrane based on vinyl addition polymerization of norbornenes: applications in anion-exchange membrane fuel cells10.1016/j.memsci.2018.10.041 ↗
25. Durability challenges of anion exchange membrane fuel cells
26. Composite poly(norbornene) anion conducting membranes for achieving durability, water management and high power (3.4 W/cm 2) in hydrogen/oxygen alkaline fuel cells10.1149/2.1301910jes ↗
27. Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells10.1039/D0TA05807F ↗
28. Achieving high-performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
29. Predicting performance stability of anion exchange membrane fuel cells10.1016/j.jpowsour.2019.02.069 ↗
30. Quantifying the critical effect of water diffusivity in anion exchange membranes for fuel cell applications10.1016/j.memsci.2020.118206 ↗
31. Catalytic advantages, challenges, and priorities in alkaline membrane fuel cells10.1021/acscatal.9b03892 ↗
32. On the origin of permanent performance loss of anion exchange membrane fuel cells: electrochemical oxidation of phenyl group10.1016/j.jpowsour.2019.226866 ↗
33. Three-dimensional multiphase modeling of alkaline anion exchange membrane fuel cell10.1016/j.ijhydene.2014.01.180 ↗
34. Water management in an alkaline-exchange-membrane fuel cell
35. Steady state and transient simulation of anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.012 ↗
36. The critical relation between chemical stability of cations and water in anion exchange membrane fuel cells environment10.1016/j.jpowsour.2017.08.026 ↗
37. Water – a key parameter in the stability of anion exchange membrane fuel cells10.1016/j.coelec.2018.03.019 ↗
38. Unexpected hydroxide ion structure and properties at low hydration10.1016/j.molliq.2020.113485 ↗
39. Pivovar
40. Stable elastomeric anion exchange membranes based on quaternary ammonium-tethered polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene triblock copolymers10.1021/acs.macromol.5b01382 ↗
41. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
42. Strategies for reducing the PGM loading in high power AEMFC anodes10.1149/08513.0873ecst ↗
43. Enhanced water transport in AEMs based on poly(styrene-ethylene-butylene-styrene) triblock copolymer for high fuel cell performance10.1039/C8PY01618F ↗
44. Numerical and experimental analyses on deviated concentration loss with alkaline anion-exchange membrane fuel cells10.1021/acs.jpcc.5b08031 ↗
45. Along-the-Channel impacts of water management and carbon-dioxide contamination in hydroxide-exchange-membrane fuel cells: a modeling study10.1149/2.0171907jes ↗
46. Model based evaluation of alkaline anion exchange membrane fuel cells with water management10.1016/j.cej.2019.05.200 ↗
47. Effect of electrode design and operating condition on performance of hydrogen alkaline membrane fuel cell10.1016/j.apenergy.2016.09.091 ↗
48. Analytical modeling of liquid saturation jump effect for hydrogen alkaline anion exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2017.04.137 ↗
49. Measuring the true hydroxide conductivity of anion exchange membranes10.1016/j.memsci.2020.118461 ↗
50. Effect of CO2 absorption on ion and water mobility in an anion exchange membrane10.1016/j.jpowsour.2018.01.071 ↗
51. Effect of reacting gas flowrates and hydration on the carbonation of anion exchange membrane fuel cells in the presence of CO210.1016/j.jpowsour.2020.228350 ↗
52. Manipulating water in high-performance hydroxide exchange membrane fuel cells through asymmetric humidification and wetproofing10.1149/2.0131506jes ↗
53. Beyond 1.0 W cm −2 performance without platinum: the beginning of a new era in anion exchange membrane fuel cells10.1149/2.0071815jes ↗
54. Perspective—the next decade of AEMFCs: near-term targets to accelerate applied R&D10.1149/1945-7111/ab8c88 ↗
55. Effect of of CO2 on the properties of anion exchange membranes for fuel cell applications
56. The alkali degradation of LDPE-based radiation-grafted anion-exchange membranes studied using different e: X situ methods10.1039/D0RA06484J ↗
57. Newman · 2004
58. Hydrogen oxidation and evolution reaction kinetics on platinum: acid vs alkaline electrolytes10.1149/1.3483106 ↗
59. Synthesis of CeOx-decorated Pd/C catalysts by controlled surface reactions for hydrogen oxidation in anion exchange membrane fuel cells
60. Fundamental mechanistic understanding of electrocatalysis of oxygen reduction on Pt and non-Pt surfaces: acid versus alkaline media10.1155/2012/491604 ↗