journal article·2021-09

Clean and stable conversion of oxygen-bearing low-concentration coal mine gas by solid oxide fuel cells with an additional reforming layer

Kangwei Wei, Xinxin Wang, Hui Zhu, Hong Liu, Shaorong Wang, Fanglin Chen, Fubao Zhou, Yihan Ling

Publisher page

Abstract

Direct power generation using low-concentration coal mine gas (LC-CMG, < 30% CH 4 ) by solid oxide fuel cells (SOFCs) is an attractive approach for the clean and efficient utilization of abundant LC-CMG resources. In this study, Ni–Fe alloy catalyst from in situ decomposition of NiFe 2O 4 oxide is used to promote the electrochemical performance, efficiency and robustness of SOFCs using simulated LC-CMG as fuel. The modified SOFC is fed with humidified H 2 and CH 4–N 2 in sequence and exhibits high electrochemical performance. There is only a slight performance drop from 783 to 660 mW cm −2 when adding O 2 in humidified CH 4–N 2 fuel. The operation of all cells with different concentrations of LC-CMG is quite stable during over 100-h tests and no coking is found on the entire anode and Ni–Fe alloy catalyst, suggesting the cell with superior resistance to coking. Besides, a heterogeneous reaction model is established to reveal the anti-carbon effect of the Ni–Fe catalyst. Our findings indicate the great application potential of direct power generation from LC-CMG by SOFCs with an additional reforming layer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. Direct operation of solid oxide fuel cells on low-concentration oxygen-bearing coal-bed methane with high stability10.1021/acs.energyfuels.7b02968 ↗
2. An assessment of mine methane mitigation and utilization technologies10.1016/j.pecs.2004.11.001 ↗
3. Fugitive coal mine methane emissions at five mining areas in China, Atmos
4. Direct power generation from low concentration coal-bed gas by a catalyst-modified solid oxide fuel cell10.1002/celc.201800254 ↗
5. Nickel-based anode with water storage capability to mitigate carbon deposition for direct ethanol solid oxide fuel cells10.1002/cssc.201301341 ↗
6. Comprehensive review of methane conversion in solid oxide fuel cells: prospects for efficient electricity generation from natural gas10.1016/j.pecs.2015.10.004 ↗
7. Effect of Al2O3 addition on the non-isothermal crystallization kinetics and long-term stability of BCABS sealing glass for IT-SOFCs10.1007/s40145-018-0294-0 ↗
8. Characterization of yttria-stabilized zirconia films deposited by dip-coating on La0.7Sr0.3MnO3 substrate: influence of synthesis parameters10.1007/s40145-013-0042-4 ↗
9. Bismuth and indium co-doping strategy for developing stable and efficient barium zirconate-based proton conductors for high-performance H-SOFCs10.1016/j.jeurceramsoc.2016.05.027 ↗
10. Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells10.1016/j.jeurceramsoc.2021.04.025 ↗
11. Greenhouse gases emissions in the production and use of ethanol from sugarcane in Brazil: the 2005/2006 averages and a prediction for 202010.1016/j.biombioe.2007.12.006 ↗
12. Feasibility of direct utilization of biomass gasification product gas fuels in tubular solid oxide fuel cells for on-site electricity generation10.1021/acs.energyfuels.5b02458 ↗
13. Preparation of bamboo-based activated carbon and its application in direct carbon fuel cells10.1021/ef200161c ↗
14. Steam reforming of methane over unsupported nickel catalysts10.1038/35005040 ↗
15. Direct operation of solid oxide fuel cells with methane fuel10.1016/j.ssi.2005.05.008 ↗
16. A review of anode materials development in solid oxide fuel cells10.1023/B:JMSC.0000034135.52164.6b ↗
17. Solid oxide fuel cells: materials, components and configurations10.1590/S0100-40422007000100031 ↗
18. Improved microstructure and performance of Ni-based anode for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2013.08.060 ↗
19. Fabrication and characterization of Cu-Ni-YSZ SOFC anodes for direct use of methane via Cu-electroplating10.1016/j.ijhydene.2009.04.060 ↗
20. Self-regenerating Co-Fe nanoparticles on perovskite oxides as a hydrocarbon fuel oxidation catalyst in solid oxide fuel cells10.1021/acs.chemmater.7b04569 ↗
21. Carbon-resistant Ni1-xCox-Ce0.8Sm0.2O1.9 anode for solid oxide fuel cells fed with methanol10.1016/j.cattod.2017.03.060 ↗
22. A-site-deficiency facilitated in situ growth of bimetallic Ni-Fe nano-alloys: a novel coking-tolerant fuel cell anode catalyst10.1039/C5NR02518D ↗
23. Ni-M (M = Sn and Sb) intermetallic-based catalytic functional layer as a built-in safeguard for hydrocarbon-fueled solid oxide fuel cells10.1039/C5TA05498B ↗
24. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells10.1038/ncomms1359 ↗
25. A robust carbon tolerant anode for solid oxide fuel cells10.1007/s40843-015-0033-6 ↗
26. Enhancing sulfur tolerance of Ni-based cermet anodes of solid oxide fuel cells by ytterbium-doped barium cerate infiltration10.1021/acsami.6b00925 ↗
27. BaZrCeYYbO enhanced coking-free on-cell reforming for direct-methane solid oxide fuel cells10.1039/C4TA01989J ↗
28. An additional layer in an anode support for internal reforming of methane for solid oxide fuel cells10.1016/j.ijhydene.2014.02.143 ↗
29. Dual layered anode support for the internal reforming of methane for solid oxide fuel cells10.1016/j.ceramint.2013.11.043 ↗
30. Grafting doped manganite into nickel anode enables efficient and durable energy conversions in biogas solid oxide fuel cells10.1016/j.apcatb.2016.07.001 ↗
31. Stable direct-methane solid oxide fuel cells with calcium-oxide-modified nickel-based anodes operating at reduced temperatures10.1016/j.apenergy.2015.12.014 ↗
32. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
33. Progress in Ni-based anode materials for direct hydrocarbon solid oxide fuel cells10.1007/s10853-018-2205-8 ↗
34. An octane-fueled solid oxide fuel cell10.1126/science.1109213 ↗
35. A functional layer for direct use of hydrocarbon fuel inlow temperature solid oxide fuel cells10.1039/C0EE00231C ↗
36. Tailoring Ni-based catalyst by alloying with transition metals (M=Ni, Co, Cu, and Fe) for direct hydrocarbon utilization of energy conversion devices10.1016/j.electacta.2016.12.178 ↗
37. Enhanced stability of Ni–Fe/GDC solid oxide fuel cell anodes for dry methane fuel10.1016/j.catcom.2010.07.014 ↗
38. Development of Fe–Ni/YSZ–GDC electrocatalysts for application as SOFC anodes: XRD and TPR characterization and evaluation in the ethanol steam reforming reaction10.1016/j.ijhydene.2010.07.026 ↗
39. Nickel-iron anode substrate for smart solid oxide fuel cells with a self‐protecting function against reoxidation10.1002/fuce.201200114 ↗
40. Reoxidation behavior of Ni-Fe bimetallic anode substrate in solid oxide fuel cells using a thin LaGaO3 based film electrolyte10.1016/j.jpowsour.2011.03.086 ↗
41. Improved reoxidation tolerance of Ni-Fe metal support for LaGaO3 thin film electrolyte cell10.1016/j.ssi.2012.01.024 ↗
42. P. Sivakumar, R. Ramesh, A. Ramanand, S. Ponnusamy, C. Muthamizhchelvan, Preparation and properties of NiFe2O4 nanowires, Mater. Lett. 66 (20120) 314-317.10.1016/j.matlet.2011.09.005 ↗
43. Structural, thermal, dielectric and magnetic properties of NiFe2O4 nanoleaf10.1016/j.jallcom.2012.05.067 ↗
44. Structure and catalytic properties of PtRu alloy thin-film10.3866/PKU.WHXB20070320 ↗
45. Facile synthesis of Fe3O4/NiFe2O4 nanosheets with enhanced Lithium-ion storage by one-step chemical dealloying10.1007/s10853-018-2729-y ↗
46. Improved energy storage solution based on hybrid oxide materials10.1021/sc300096s ↗
47. Double-perovskite PrBaCo2/3Fe2/3Cu2/3O5+δ as cathode material for intermediate-temperature solid-oxide fuel cells10.1016/j.jpowsour.2013.01.172 ↗
48. Ni doped PrSr3Fe3O10-δ ruddlesden-popper oxide for active oxygen reduction cathode for solid oxide fuel cell10.1016/j.electacta.2016.11.178 ↗
49. Enhanced electromagnetic absorption properties of reduced graphene oxide-polypyrrole with NiFe2O4 particles prepared with simple hydrothermal method10.1016/j.matlet.2014.01.054 ↗
50. Enhanced visible-light-driven photocatalytic activity for antibiotic degradation using magnetic NiFe2O4/Bi2O3 heterostructures10.1016/j.cej.2014.07.071 ↗
51. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
52. Near ambient pressure X-ray photoelectron- and impedance spectroscopy study of NiO-Ce0.9Gd0.1O2-δAnode reduction using a novel dual-chamber spectroelectrochemical cell10.1016/j.jpowsour.2017.12.080 ↗
53. Characterization and optimization of Ba-deficient and highly active BaCo0.4Fe0.4Zr0.1Y0.1O3-δ-based cathode materials for protonic ceramics fuel cells10.1016/j.ceramint.2019.06.081 ↗
54. Size-controlled synthesis and magnetic properties of NiFe2O4 hollow nanospheres via a gel-assistant hydrothermal route10.1016/j.jallcom.2009.11.031 ↗
55. NiMo-ceria-zirconia catalytic reforming layer for solid oxide fuel cells running on a gasoline surrogate10.1016/j.apcatb.2017.10.067 ↗
56. La0.75Sr0.25)(Cr0.5Mn0.5)O3/YSZ composite anodes for methane oxidation reaction in solid oxide fuel cells10.1016/j.ssi.2005.09.010 ↗
57. Lanthanum chromite based catalysts for oxidation of methane directly on SOFC anodes10.1006/jcat.2001.3286 ↗
58. Fabrication and performance of direct- methane SOFC with a Cu-CeO2 based anode10.3866/PKU.WHXB20100323 ↗
59. Physical characterization and electrochemical performance of copper-iron-ceria-YSZ anode-based SOFCs in H2 and methane fuels10.1002/er.3332 ↗
60. Cu-Co bimetallic anodes for direct utilization of methane in SOFCs10.1149/1.1833678 ↗
61. Synthesis and characterization of (La0.75Sr 0.25)Cr0.5Mn0.5O3-δ, a redox-stable, efficient perovskite anode for SOFCs10.1149/1.1639161 ↗
62. Double perovskites as anode materials for solid oxide fuel cells10.1126/science.1125877 ↗
63. A redox-stable direct-methane solid oxide fuel cell (SOFC) with Sr2FeNb0.2Mo0.8O6-δ double perovskite as anode material10.1016/j.jpowsour.2016.07.101 ↗
64. Evelopment of a coking-resistant NiSn anode for the direct methane SOFC10.1002/fuce.201400187 ↗
65. Preparation of Cu-Ni/YSZ solid oxide fuel cell anodes using microwave irradiation10.1016/j.jpowsour.2011.01.087 ↗
66. Alloying effects of Pd and Ni on the catalysis of the oxidation of dry CH4 in solid oxide fuel cells10.1016/j.apcata.2009.09.007 ↗
67. Carbon-resistant Ni-YSZ/Cu-CeO2 -YSZ dual-layer hollow fiber anode for micro tubular solid oxide fuel cell10.1016/j.ijhydene.2013.12.168 ↗
68. Carbon-tolerant Ni-based cermet anodes modified by proton conducting yttrium- and ytterbium-doped barium cerates for direct methane solid oxide fuel cells10.1039/C5TA06488K ↗
69. Co-generation of electricity and syngas on proton-conducting solid oxide fuel cell with a perovskite layer as a precursor of a highly efficient reforming catalyst10.1016/j.jpowsour.2017.02.074 ↗
70. An ingenious Ni/Ce co-doped titanate based perovskite as a coking-tolerant anode material for direct hydrocarbon solid oxide fuel cells10.1039/C5TA06200D ↗
71. Enhanced coking tolerance of a MgO-modified Ni cermet anode for hydrocarbon fueled solid oxide fuel cells10.1039/C6TA08031F ↗
72. Investigation of MgO promoted NiO:SDC anode material for intermediate temperature solid oxide fuel cells10.1149/1.3570155 ↗
73. Carbon-tolerant solid oxide fuel cells using NiTiO3 as an anode internal reforming layer10.1016/j.jpowsour.2014.01.014 ↗
74. In situ fabrication of (Sr,La)FeO4 with CoFe alloy nanoparticles as an independent catalyst layer for direct methane-based solid oxide fuel cells with a nickel cermet anode10.1039/C6TA04639H ↗
75. The conversion among reactions at Ni-based anodes in solid oxide fuel cells with low concentrations of dry methane10.1016/j.jpowsour.2010.09.082 ↗
76. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
77. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
78. Performance and durability of an anode-supported solid oxide fuel cell with a PdO/ZrO2 engineered (La0.8Sr0.2)0.95MnO3-δ-(Y2O3)0.08(ZrO2)0.92 composite cathode10.1016/j.ijhydene.2018.04.177 ↗
79. Performance and DRT analysis of P-SOFCs fabricated using new phase inversion combined tape casting technology10.1039/C7TA04967F ↗
80. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni∕8YSZ cermet electrodes10.1149/1.2908860 ↗
81. Detailed characterization of anode-supported SOFCs by impedance spectroscopy10.1149/1.2433311 ↗
82. Towards quantification of relations between electrode polarisation and microstructure10.1149/1.3587113 ↗
83. Efficient and stable conversion of oxygen-bearing low-concentration coal mine methane by the electrochemical catalysis of SOFC anode: from pollutant to clean energy10.1016/j.apcatb.2019.118413 ↗
84. Charge-transfer modeling and polarization DRT analysis of proton ceramics fuel cells based on mixed conductive electrolyte with the modified anode-electrolyte interface10.1021/acsami.8b10429 ↗
85. Extensive analysis of large planar SOFC: operation with humidified methane and carbon monoxide to examine carbon deposition based degradation10.1016/j.electacta.2017.09.026 ↗
86. Electrochemical characteristics and carbon tolerance of solid oxide fuel cells with direct internal dry reforming of methane10.1016/j.apenergy.2018.06.114 ↗
87. In-situ electrochemical characterization methods for industrial-sized planar solid oxide fuel cells Part I: Methodology, qualification and detection of carbon deposition10.1016/j.electacta.2016.05.025 ↗
88. Local activation and degradation of electrochemical processes in a SOFC10.1149/05701.0561ecst ↗
89. A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0.8Sr0.2MnO3-δ10.1016/j.jpowsour.2020.228959 ↗
90. Analysis of impedance spectra for segmented-in-series tubular solid oxide fuel cells10.1149/1.3494214 ↗
91. Insight into the oxygen reduction reaction on the LSM|GDC interface of solid oxide fuel cells through impedance spectroscopy analysis10.1039/C5CY02232K ↗
92. Reactions and transport pathways in syngas fueled Ni/YSZ SOFC anodes: experiments and modeling10.1149/06101.0075ecst ↗
93. Electrochemical analysis of reformate-fuelled anode supported SOFC10.1149/1.3597177 ↗
94. Multi-physics modeling assisted design of non-coking anode for planar solid oxide fuel cell fueled by low steam methane10.1063/1674-0068/31/cjcp1805102 ↗
95. Multi-physics modeling of solid oxide fuel cell fueled by methane and analysis of carbon deposition10.1063/1674-0068/28/cjcp1503033 ↗