Optimum cooling surface for prismatic lithium battery with metal shell based on anisotropic thermal conductivity and dimensions
Source abstract
Abstract
Abstract Battery thermal management system (BTMS) is important for the battery pack in electric vehicles. Existing literature focuses on the structure of BTMS but not on the selection of the optimal cooling surface of the battery. To the authors’ knowledge, this study first investigates the optimum cooling surface for prismatic lithium battery based on anisotropic thermal conductivity, dimensions, and metal shell. The specific heat, thermal conductivity, and heat generation are measured experimentally to establish a three-dimensional (3D) shell cell separation numerical model. Results show that aluminum shell plays the role of fin and enhances the cooling effect. Cooling on surface B has better effect when the aluminum shell thickness is less than 0.3 mm; otherwise, cooling on surface A is better. The cooling effect can be improved by increasing the thickness and area of aluminum shell. Battery temperature rise reduces by 67.5% when the thickness changes from 0 mm to 1 mm. A negative linear correlation exists between the temperature rise of the battery and the cooling area. Double surface cooling reduces the temperature rise by 24.1% compared with single surface cooling. The investigation on optimal cooling surface can guide the selection of cooling form of BTMS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Challenges in the development of advanced li-ion batteries: a review10.1039/c1ee01598b ↗
2. Lithium iron phosphate based battery–assessment of the aging parameters and development of cycle life model10.1016/j.apenergy.2013.09.003 ↗
3. Temperature effect and thermal impact in lithium–ion batteries: a review10.1016/j.pnsc.2018.11.002 ↗
4. Experimental determination on thermal parameters of prismatic lithium ion battery cells10.1016/j.ijheatmasstransfer.2019.04.143 ↗
5. Thermal characterization of large size lithium–ion pouch cell based on 1d electro–thermal model10.1016/j.jpowsour.2014.08.092 ↗
6. Experimental study on the influence of temperature and state–of–charge on the thermophysical properties of an LFP pouch cell10.1016/j.jpowsour.2015.05.084 ↗
7. Measuring and assessing the effective in–plane thermal conductivity of lithium iron phosphate pouch cells10.1016/j.energy.2016.08.087 ↗
8. Simultaneous estimation of thermal parameters for large–format laminated lithium–ion batteries10.1016/j.jpowsour.2014.02.079 ↗
9. Li–Ion polymer cells thermal property changes as a function of cycle–life10.1016/j.jpowsour.2014.04.033 ↗
10. Measurement of anisotropic thermophysical properties of cylindrical Li–ion cells10.1016/j.jpowsour.2013.11.107 ↗
11. Thermal Impedance Spectroscopy–A method for the thermal characterization of high power battery cells10.1016/j.jpowsour.2012.07.144 ↗
12. A critical review of battery thermal performance and liquid based battery thermal management10.1016/j.enconman.2018.12.051 ↗
13. Reciprocating air flow for Li–ion battery thermal management to improve temperature uniformity10.1016/j.jpowsour.2011.02.076 ↗
14. Thermal investigation of lithium–ion battery module with different cell arrangement structures and forced air–cooling strategies10.1016/j.apenergy.2014.08.013 ↗
15. Thermal performance of lithium-ion battery thermal management system by using mini–channel cooling10.1016/j.enconman.2016.08.063 ↗
16. Thermal design and simulation of mini–channel cold plate for water cooled large sized prismatic lithium-ion battery10.1016/j.applthermaleng.2017.05.010 ↗
17. Investigation of power battery thermal management by using mini–channel cold plate10.1016/j.enconman.2014.10.015 ↗
18. Thermal analysis of a 6s4p Lithium-ion battery pack cooled by cold plates based on a multi–domain modeling framework10.1016/j.applthermaleng.2020.115216 ↗
19. Influence of operating conditions on the optimum design of electric vehicle battery cooling plates10.1016/j.jpowsour.2013.06.114 ↗
20. Design optimization of electric vehicle battery cooling plates for thermal performance10.1016/j.jpowsour.2011.06.090 ↗
21. Multi–objective optimization design of double-layered reverting cooling plate for lithium–ion batteries10.1016/j.ijheatmasstransfer.2019.118580 ↗
22. A novel approach for Lithium–ion battery thermal management with streamline shape mini channel cooling plates10.1016/j.applthermaleng.2019.04.033 ↗
23. Preventing heat propagation and thermal runaway in electric vehicle battery modules using integrated PCM and micro–channel plate cooling system10.1016/j.applthermaleng.2019.113797 ↗
24. Investigation on thermal management performance of PCM–fin structure for Li-ion battery module in high–temperature environment10.1016/j.enconman.2018.09.025 ↗
25. Experimental study of a passive thermal management system for high-powered lithium–ion batteries using porous metal foam saturated with phase change materials10.1016/j.jpowsour.2014.01.006 ↗
26. Thermal performance enhancement of phase change material using aluminum–mesh grid foil for lithium-capacitor modules10.1016/j.est.2020.101508 ↗
27. A novel liquid cooling plate concept for thermal management of lithium–ion batteries in electric vehicles10.1016/j.enconman.2021.113862 ↗
28. Experimental and numerical study of a passive thermal management system using flat heat pipes for lithium–ion batteries10.1016/j.applthermaleng.2019.114660 ↗
29. Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system10.1016/j.enconman.2017.02.022 ↗
30. Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures10.1016/j.enconman.2017.10.063 ↗
31. Three–dimensional thermal finite element modeling of lithium–ion battery in thermal abuse application10.1016/j.jpowsour.2009.10.090 ↗
32. A general energy balance for battery systems10.1149/1.2113792 ↗
33. Experimental demonstration of active thermal control of a battery module consisting of multiple Li–ion cells10.1016/j.ijheatmasstransfer.2015.07.069 ↗
34. One dimensional fast computational partial differential model for heat transfer in lithium–ion batteries10.1016/j.est.2021.102471 ↗
35. Panchal · 2014
36. Panchal · 2016
37. Thermal performance of cylindrical Lithium–ion battery thermal management system based on air distribution pipe10.1016/j.ijheatmasstransfer.2018.11.116 ↗
38. A new concept of thermal management system in Li–ion battery using air cooling and heat pipe for electric vehicles10.1016/j.applthermaleng.2020.115280 ↗
39. Numerical study on the thermal management system of a molten sodium-sulfur battery module10.1016/j.jpowsour.2012.03.028 ↗
40. Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling10.1016/j.enconman.2016.08.063 ↗