journal article·2021-09

Mechanochemical synthesis and characterization of Na3–P1–W S4 solid electrolytes

Fumika Tsuji, Akira Nasu, Atsushi Sakuda, Masahiro Tatsumisago, Akitoshi Hayashi

Publisher page

Abstract

Abstract All-solid-state sodium batteries are attracting attention as next-generation batteries, owing to their improved safety and abundance of sodium resources. To realize all-solid-state sodium batteries, solid electrolytes with high sodium-ion conductivities are required. In this study, Na3PS4 electrolytes with partial substitution of P5+ with W6+ were investigated. The Na3–xP1–xWxS4 sulfide-based solid electrolytes were prepared via a mechanochemical process and consecutive heat treatment. The Na2.85P0.85W0.15S4 electrolyte with Na vacancies exhibited an ionic conductivity of 8.8 × 10−3 S cm−1 at 25 °C, which was higher than that of Na3PS4 solid electrolyte. The all-solid-state batteries (Na-Sn/Na2.85P0.85W0.15S4/TiS2) exhibited a reversible capacity of 140 mA h g−1 at a current density of 0.038 mA cm−2 and retained the capacity of 115 mAh g−1 for 40 cycles at 0.130 mA cm−2 at 25 °C. The Na3–xP1–xWxS4 samples prepared via mechanochemistry are homogeneous electrolytes free of crystalline WS2 impurities and are effective for application to all-solid-state sodium batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Development of sulfide solid electrolytes and interface formation processes for bulk-type all-solid state Li and Na batteries10.3389/fenrg.2016.00025 ↗
2. High temperature sodium batteries: status, challenges and future trends10.1039/c3ee24086j ↗
3. Key challenges in future Li-battery research10.1098/rsta.2010.0112 ↗
4. Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries10.1038/ncomms1843 ↗
5. High sodium ion conductivity of glass–ceramic electrolytes with cubic Na3PS410.1016/j.jpowsour.2014.02.054 ↗
6. Synthesis, structure determination, and ionic conductivity of sodium tetrathiophosphate10.1016/0022-4596(92)90295-7 ↗
7. All-solid-state Na/S batteries with a Na3PS4 electrolyte operating at room temperature10.1021/acs.chemmater.7b01116 ↗
8. Vacancy-controlled Na+ superion conduction in Na11Sn2PS1210.1002/anie.201712769 ↗
9. Na11Sn2PS12: a new solid state sodium superionic conductor10.1039/C7EE03083E ↗
10. Na3SbS4: a solution processable sodium superionic conductor for all‐solid‐state sodium‐ion batteries10.1002/anie.201604158 ↗
11. An air‐stable Na3SbS4 superionic conductor prepared by a rapid and economic synthetic procedure10.1002/anie.201601546 ↗
12. Vacancy-contained tetragonal Na3SbS4 superionic conductor10.1002/advs.201600089 ↗
13. X-ray crystal structure analysis of sodium-ion conductivity in 94Na3PS4·6Na4SiS4 glass-ceramic electrolytes10.1002/celc.201402016 ↗
14. Preparation and characterization of highly sodium ion conducting Na3PS4−Na4SiS4 solid electrolytes10.1039/C4RA00996G ↗
15. Na-ion dynamics in tetragonal and cubic Na3PS4, a Na-ion conductor for solid state Na-ion batteries10.1039/C6TA05896E ↗
16. Room-temperature all-solid-state rechargeable sodium-ion batteries with a Cl-doped Na3PS4 superionic conductor10.1038/srep33733 ↗
17. Vacancy-driven Na+ superionic conduction in new Ca-doped Na3PS4 for all-solid-state Na-ion batteries10.1021/acsenergylett.8b01479 ↗
18. Defect-mediated conductivity enhancements in Na3−xPn1−xWxS4 (pn = P, Sb) using aliovalent substitutions10.1021/acsenergylett.9b02537 ↗
19. Ionic conductivity of and phase transition in lithium thiophosphate Li3PS410.1016/0167-2738(84)90097-3 ↗
20. Schwingungsspektren Und Strukturchemie von Heterometall-Komplexen Und-Clustern Mit Thiometallat-Liganden10.1016/0022-2860(83)90113-8 ↗
21. Electron delocalization in thiometallato complexes and clusters with different M’S2MS2 (M’ = Fe, Ag; M = Mo, W) units studied by means of resonance—Raman spectroscopy10.1016/0584-8539(85)80116-1 ↗
22. Strain-induced phonon shifts in tungsten disulfide nanoplatelets and nanotubes
23. Single-step synthesis of highly conductive Na3PS4 solid electrolyte for sodium all solid-state batteries10.1016/j.jpowsour.2019.05.031 ↗
24. High power Na-ion capacitor with TiS2 as insertion host10.1016/j.scriptamat.2018.10.016 ↗
25. Operando structural and chemical evolutions of TiS2 in Na-ion batteries10.1039/D0TA00226G ↗