journal article·2021-04

Increasing fuel cell durability during prolonged and intermittent fuel starvation using supported IrOx

Tita Labi, Francois Van Schalkwyk, Shuang Ma Andersen, Per Morgen, Sekhar Chandra Ray, Jessica Chamier

Publisher page

Abstract

Abstract Addition of an oxygen evolution reaction (OER) catalyst is a materials approach to mitigate the impacts of potential reversal caused by fuel starvation. In this study Iridium oxide (IrOx) supported on graphitized Vulcan (GV) black (56 wt% Ir) was added as an OER catalyst into the anode of a membrane electrode assembly (MEA) (0.1 mgIr/cm2). When exposed to intermittent 5-, 10- and 30- minutes of starvation, with 10 min recovery periods, the reversed cell potential was clamped at −0.8 V, mitigating severe carbon degradation. The intermittently starved MEAs regained >95% of their initial performance. After the first event, the performance loss was significant at 4% (0.2 A/cm2) with increases in ohmic resistance, thereafter the performance remained relatively stable. Using SEM and EIS, the increased ohmic resistance was attributed to deformation and contraction of the membrane and ionomer reconfiguration which impacted proton conductive pathways. Thinning of the anode was unavoidable, contributing to contact resistance and decreased performance. The Pt and IrOx/GV catalyst remained relatively stable when subjected to multiple short periods of fuel starvation. The IrOx/GV MEA was reversal tolerant and provided insight into the degradation processes which occur during periodic and prolonged fuel starvation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. USA Department of Energy. Types of fuel cells. Available at: https://www.energy.gov/eere/fuelcells/types-fuel-cells. (Accessed: 18 07 2019).
2. Proton exchange membrane fuel cell reversal: a review10.3390/catal6120197 ↗
3. Accelerated test analysis of reversal potential caused by fuel starvation during PEMFCs operation10.1016/j.ijhydene.2010.01.071 ↗
4. Electrocatalyst stability in PEMFCs and the role of fuel starvation and cell reversal tolerant anodes10.1149/1.2214545 ↗
5. On the impact of water activity on reversal tolerant fuel cell anode performance and durability10.1016/j.jpowsour.2016.07.002 ↗
6. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
7. Stability and dissolution of electrocatalysts : building the bridge between model and “ real world ” systems
8. Benchmarking heterogeneous electrocatalysts for the oxygen evolution reaction10.1021/ja407115p ↗
9. Activity and durability of iridium nanoparticles in the oxygen evolution reaction10.1149/2.0151611jes ↗
10. Water electrolysis plateau in voltage reversal process for proton exchange membrane fuel cells10.1016/j.jpowsour.2020.227952 ↗
11. Study of failure mechanisms of the reversal tolerant fuel cell anode via novel in-situ measurements10.1016/j.ijhydene.2019.10.189 ↗
12. Understanding the voltage reversal behavior of automotive fuel cells10.1016/j.jpowsour.2018.06.083 ↗
13. Fabrication of iridium oxide nanoparticles supported on activated carbon powder by flashlight irradiation for oxygen evolutions10.1016/j.mseb.2015.06.004 ↗
14. Investigation of heterogeneous catalysts by an electrochemical method: ceria and titania-supported iridium nanoparticles for ethylene oxidation10.1149/07207.0161ecst ↗
15. Electrocatalytic activity of iridium oxide nanoparticles coated on carbon for oxygen reduction as cathode catalyst in polymer electrolyte fuel cell10.1016/j.jpowsour.2010.01.049 ↗
16. Graphitized carbon as an efficient mesoporous layer for unitized regenerative fuel cells10.1016/j.ijhydene.2016.08.092 ↗
17. Novel methodology for ex situ characterization of iridium oxide catalysts in voltage reversal tolerant proton exchange membrane fuel cell anodes10.1016/j.jpowsour.2019.02.006 ↗
18. Operando evidence for a universal oxygen evolution mechanism on thermal and electrochemical iridium oxides10.1021/acs.jpclett.8b00810 ↗
19. The electronic structure of iridium and its oxides10.1002/sia.5895 ↗
20. Iridium oxide for the oxygen evolution reaction: correlation between particle size, morphology, and the surface hydroxo layer from operando XAS10.1021/acs.chemmater.6b02625 ↗
21. Some electrocatalytic properties of anodic iridium oxide nanoparticles in acidic solution10.1016/S0013-4686(99)00282-0 ↗
22. A gas-diffusion cathode coated with oxide-catalyst for polymer electrolyte fuel cells using neither platinum catalyst nor carbon catalyst-support10.1016/j.electacta.2013.04.133 ↗
23. Knights · 2003
24. Gharehpetian · 2017
25. Analysis of degradation in PEMFC caused by cell reversal during air starvation10.1016/j.ijhydene.2008.02.049 ↗
26. Lifetime prediction of a polymer electrolyte membrane fuel cell under automotive load cycling using a physically-based catalyst degradation model10.3390/en11082054 ↗
27. Kinetic model of platinum dissolution in PEMFCs10.1149/1.1613669 ↗
28. Instability of Pt/C electrocatalysts in proton exchange membrane fuel cells A mechanistic investigation10.1149/1.2050347 ↗
29. Improvement of fuel cell durability performance by avioding high voltage10.1007/s12239-019-0104-x ↗
30. Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell10.1016/j.jpowsour.2007.07.004 ↗
31. Study of PEM fuel cell performance by electrochemical impedance spectroscopy10.1016/j.ijhydene.2010.03.069 ↗
32. PEM stack test and analysis in a power system at operational load via ac impedance10.1016/j.jpowsour.2007.02.071 ↗
33. The common intermediates of oxygen evolution and dissolution reactions during water electrolysis on iridium10.1002/anie.201709652 ↗
34. Experimental activity descriptors for iridium-based catalysts for the electrochemical oxygen evolution reaction (OER)10.1021/acscatal.9b00648 ↗