journal article·2021-01

Long-term operation of a solid oxide fuel cell with MoNi–CeO2 as anode directly fed by biogas containing simultaneously sulphur and siloxane

M.J. Escudero, C.A. Maffiotte, J.L. Serrano

Publisher page

Abstract

Abstract This work analyses the long-term behaviour of MoNi–CeO2 (MoNi–Ce) anode in a direct internal reforming solid oxide fuel cell (DIR-SOFC) fed by biogas containing simultaneously sulphur and siloxanes. Both impurities are common in biogas and it is considered that they damage SOFC performance. An electrolyte supported cell with MoNi–Ce was operated under load demand (140 mA cm−2) at 750 °C in clean biogas for 116 h, followed by biogas with 10 ppm(v) H2S and 0.5 ppm(v) D4 siloxane (octamethylcyclotetrasiloxane) for 1737 h, and finally, clean biogas again for 96 h. Cell performance was periodically evaluated using electrochemical methods. Post-test analyses were conducted by SEM-EDS and XPS. The results show a stable cell performance in clean biogas, while the presence of both impurities in biogas initially led to a drop in performance, but without significant degradation after testing. A partial recovery in performance is observed after stopping both impurities in biogas. Silicon and small traces of carbon and sulphur were detected on the anode surface. It is demonstrated that MoNi–Ce exhibits high tolerance to the co-presence of H2S and D4 in biogas and good resistance to carbon deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Carbon deposition behaviour in metal-infiltrated gadolinia doped ceria electrodes for simulated biogas upgrading in solid oxide electrolysis cells10.1016/j.jpowsour.2015.06.003 ↗
2. On the technical challenges affecting the performance of direct internal reforming biogas solid oxide fuel cells10.1016/j.rser.2018.10.025 ↗
3. Techno-economic analysis of solid oxide fuel cell-based combined heat and power systems for biogas utilization at wastewater treatment facilities10.1016/j.jpowsour.2013.01.017 ↗
4. Progress and perspectives in converting biogas to transportation fuels10.1016/j.rser.2014.08.008 ↗
5. Selection of appropriate biogas upgrading technology a review of biogas cleaning, upgrading and utilization10.1016/j.rser.2015.06.029 ↗
6. Solid oxide fuel cells fuelled with biogas: potential and constraints10.1016/j.renene.2018.11.028 ↗
7. Direct reforming of biogas on Ni-based SOFC anodes: modelling of heterogeneous reactions and validation with experiment10.1016/j.jpowsour.2013.05.020 ↗
8. Biogas cleaning: trace compounds removal with model validation10.1016/j.seppur.2018.07.081 ↗
9. Coupling adsorption with biotechnologies for siloxane abatement from biogas10.1016/j.renene.2020.02.026 ↗
10. Individual impact of several impurities on the performance of direct internal reforming biogas solid oxide fuel cell using W-Ni-CeO2 as anode10.1016/j.ijhydene.2019.06.028 ↗
11. In situ study of a composition of outlet gases from biogas fuelled solid oxide fuel cell performed by the Fourier transform infrared spectroscopy10.1016/j.ijhydene.2019.03.243 ↗
12. An experimental study of the interaction between tar and SOFCs with Ni/GDC anodes10.1016/j.apenergy.2013.03.020 ↗
13. Performance of a direct methane solid oxide fuel cell using nickel-ceria-yttria stabilized zirconia as the anode10.3390/ma13030599 ↗
14. Long-term operation stability tests of intermediate and high temperature Ni-based anodes' SOFCs directly fueled with simulated biogas mixtures10.1016/j.ijhydene.2012.02.147 ↗
15. Dealing with fuel contaminants in biogas-fed solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) plants: degradation of catalytic and electro-catalytic active surfaces and related gas purification methods10.1016/j.pecs.2017.04.002 ↗
16. Limiting factors for planar solid oxide fuel cells under different trace compound concentrations10.1016/j.energy.2015.11.070 ↗
17. Chemical durability of solid oxide fuel cells: influence of impurities on long-term performance10.1016/j.jpowsour.2010.09.122 ↗
18. Evaluation of high temperature gas cleaning options for biomass gasification product gas for solid oxide fuel cells10.1016/j.pecs.2012.03.006 ↗
19. Tolerance tests of H2S-laden biogas fuel on solid oxide fuel cells10.1016/j.jpowsour.2010.02.078 ↗
20. The fate of SOFC anodes under biomass producer gas contaminants10.1016/j.rser.2016.10.012 ↗
21. Performance improvement of direct internal reforming solid oxide fuel cell fuelled by H2S-contaminated biogas with paper-structured catalyst technology10.1016/j.jpowsour.2016.09.095 ↗
22. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
23. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
24. Enhancing coking resistance of Ni/YSZ electrodes: in situ characterization, mechanism research, and surface engineering
25. Poisoning of SOFC anodes by various fuel impurities10.1016/j.ssi.2008.02.062 ↗
26. Solid oxide fuel cell anode degradation by the effect of siloxanes10.1016/j.jpowsour.2015.01.053 ↗
27. Damage of siloxanes on Ni-YSZ anode supported SOFC operated on hydrogen and bio-syngas10.1002/fuce.201400185 ↗
28. Performance evaluation of WNi-CeO2 as anode in a solid oxide fuel cell fed by simulated biogas mixtures10.1016/j.ijhydene.2015.03.110 ↗
29. Escudero · 2016
30. Analysis of the electrochemical performance of MoNi-CeO2 cermet as anode material for solid oxide fuel cell. Part I. H2, CH4 and H2/CH4 mixtures as fuels10.1016/j.jpowsour.2013.12.027 ↗
31. Trace compounds affecting biogas energy utilization-A review10.1016/j.enconman.2011.07.005 ↗
32. Development of on-line measurement techniques for siloxanes and other trace compounds in biogas10.1016/j.wasman.2009.11.030 ↗
33. Potential oscillation of methane oxidation reaction on (La0.75Sr0.25)(Cr0.5Mn0.5)O3 electrodes of solid oxide fuel cells10.1016/j.jpowsour.2007.11.107 ↗
34. Current oscillations in solid oxide fuel cells under weakly humidified conditions10.1149/2.0701608jes ↗
35. Sulfur poisoning of SOFCs: voltage oscillation and Ni oxidation10.1149/2.032211jes ↗
36. Polarization-Induced interfacial reactions between nickel and selenium in Ni/zirconia SOFC anodes and comparison with sulfur poisoning10.1149/1.3505936 ↗
37. Electrochemical performance of a solid oxide fuel cell with an anode based on Cu-Ni/CeO2 for methane direct oxidation10.1016/j.jpowsour.2013.05.159 ↗
38. A kinetic study of oxygen reduction reaction on La2NiO4 cathodes by means of impedance spectroscopy10.1016/j.jelechem.2007.08.006 ↗
39. Nanosilicon electrodes for lithium-ion batteries: interfacial mechanisms studied by hard and soft X-ray photoelectron spectroscopy10.1021/cm2034195 ↗
40. Synthesis of Ce2O2S and Gd2(1–y)Ce2yO2S nanoparticles and reactivity from in situ X-ray absorption spectroscopy and X-ray photoelectron spectroscopy10.1021/acs.inorgchem.7b02336 ↗
41. Electrochemical analysis of a system based on W and Ni combined with CeO2 as potential sulphur-tolerant SOFC anode10.1002/fuce.201500076 ↗
42. Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes10.1016/j.jpowsour.2019.227513 ↗
43. Band gap engineering of CeO2 nanostructure using an electrochemically active biofilm for visible light applications10.1039/C4RA00861H ↗
44. Substrate related structural, electronic and electrochemical properties of evaporated CeOx ion storage layers10.1016/j.tsf.2006.02.077 ↗
45. A comparative study on the ex situ and in situ desulfurization of hydrotreating catalysts10.1016/j.cattod.2010.07.024 ↗
46. Hydrodesulfurization of 4,6-dimethyldibenzothiophene over Co(Ni)MoS2 catalysts supported on alumina: effect of gallium as an additive10.1016/j.cattod.2007.12.085 ↗
47. Sulfur poisoning in Ni-anode solid oxide fuel cells (SOFCs): deactivation in single cells and a stack10.1016/j.cej.2015.08.091 ↗
48. Characterisation of sulphur poisoning of anodes in single-cell SOFC stacks using impedance spectroscopy
49. Biosyngas utilization in solid oxide fuel cells with Ni∕GDCanodes10.1115/1.2349535 ↗
50. Catalytic stability of a Ni-catalyst towards biogas reforming in the presence of deactivating trace compounds10.1016/j.renene.2018.05.006 ↗
51. Trace compounds impact on SOFC performance: experimental and modelling approach
52. SOFC single cells fed by biogas: experimental tests with trace contaminants10.1016/j.wasman.2017.11.030 ↗
53. Intermediate-temperature solid oxide fuel cell employing reformed effective biogas: power generation and inhibition of carbon deposition10.1016/j.jpowsour.2016.11.080 ↗
54. Development of paper-structured catalyst for application to direct internal reforming solid oxide fuel cell fueled by biogas10.1016/j.ijhydene.2019.02.134 ↗
55. Performance and stability of composite nickel and molybdenum sulfide-based anodes for SOFC utilizing H2S10.1016/j.jpowsour.2007.12.097 ↗
56. Ni catalysts with Mo promoter for methane steam reforming10.1016/j.fuel.2009.03.025 ↗
57. Stability of materials as candidates for sulfur-resistant anodes of solid oxide fuel cells10.1149/1.2198107 ↗