Device modeling and performance optimization of thermoelectric generators under isothermal and isoflux heat source condition
Source abstract
Abstract
Abstract Thermoelectric generator (TEG) is considered as promising way of clean energy generation by recycling waste heat, but its poor performance due to several kinds of energy losses impedes wide scale commercialization. Since, most of the waste heat sources have constant heat flux (isoflux) conditions it is necessary to evaluate the performance of TEG under such conditions. Here, various kinds of parasitic heat losses such as conduction, and radiation along with energy losses through contacts are numerically simulated in order to predict the performance of TEG for both isothermal and isoflux heat source conditions. Further, optimizations of controlling parameters of TEG such as leg geometry, leg length, cross sectional area, and external load resistance are done to maximize the efficiency and power output of TEG. To overcome the cumbersome optimization process by experimental trials, Taguchi and ANOVA methods are employed to optimize all the device parameters for both types of operating conditions i.e. isothermal and isoflux. Under optimized conditions, maximum power of ~48 W (an increase of 52%) is predicted under isothermal condition for cylindrical legged TEG and 10.6 W (an increase of 100%) is obtained under constant heat flux of 63 kW/m2 for pyramid legged TEG.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Field · 2014
2. Quantification of global waste heat and its environmental effects10.1016/j.apenergy.2018.10.102 ↗
3. Thermoelectric generators for automotive waste heat recovery systems part ii: parametric evaluation and topological studies10.1007/s11664-013-2472-8 ↗
4. Designing high efficiency segmented thermoelectric generators10.1016/j.enconman.2012.07.030 ↗
5. A research on thermoelectric generator's electrical performance under temperature mismatch conditions for automotive waste heat recovery system10.1016/j.csite.2015.03.006 ↗
6. Relationship between thermoelectric figure of merit and energy conversion efficiency10.1073/pnas.1510231112 ↗
7. Measurement and simulation of thermoelectric efficiency for single leg10.1063/1.4916545 ↗
8. Analysis of the internal heat losses in a thermoelectric generator10.1016/j.ijthermalsci.2014.06.003 ↗
9. Module geometry and contact resistance of thermoelectric generators analyzed by multiphysics simulation10.1007/s11664-010-1331-0 ↗
10. Estimation of thermoelectric generator performance by finite element modeling10.1007/s11664-009-1048-0 ↗
11. Effect of various leg geometries on thermo-mechanical and power generation performance of thermoelectric devices10.1016/j.applthermaleng.2014.07.027 ↗
12. The thermoelement as thermoelectric power generator: effect of leg geometry on the efficiency and power generation10.1016/j.enconman.2012.07.020 ↗
13. Performance analysis and optimum operation of a thermoelectric generator by Taguchi method10.1016/j.apenergy.2015.08.025 ↗
14. Taguchi optimization of bismuth-telluride based thermoelectric cooler10.1063/1.4990992 ↗
15. A comprehensive optimization study on Bi 2 Te 3-based thermoelectric generators using the Taguchi method10.1039/C7SE00437K ↗
16. High thermoelectric performance in Bi 0.46 Sb 1.54 Te 3 nanostructured with ZnTe10.1039/C8EE00290H ↗
17. Modeling and analysis of the effect of thermal losses on thermoelectric generator performance using effective properties10.1016/j.apenergy.2017.11.096 ↗
18. Modelling of segmented high-performance thermoelectric generators with effects of thermal radiation, electrical and thermal contact resistances10.1038/srep24123 ↗
19. Heat loss and thermoelectric generator design10.1016/0196-8904(85)90019-6 ↗
20. Optimization of segmented thermoelectric generator using Taguchi and ANOVA techniques10.1038/s41598-017-16372-8 ↗
21. Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system10.1016/j.applthermaleng.2012.10.024 ↗
22. Application of Taguchi method for optimization of process parameters in improving the surface roughness of lathe facing operation
23. Thermal studies in the exhaust system of a diesel-powered light-duty vehicle
24. Application of Taguchi method for optimizing the process parameters for the removal of copper and nickel by growing Aspergillus sp10.1016/j.wri.2016.05.001 ↗
25. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe10.1038/ncomms12167 ↗
26. Cubic AgPbmSbTe2+ m: bulk thermoelectric materials with high figure of merit10.1126/science.1092963 ↗
27. Complex thermoelectric materials
28. On the effective thermoelectric properties of layered heterogeneous medium
29. Multiphysics simulation of thermoelectric systems-modeling of Peltier-cooling and thermoelectric generation
30. Enhancement of thermoelectric properties by Se substitution in layered bismuth-chalcogenide LaOBiS2-x Se x10.1063/1.4900953 ↗
31. Taguchi · 1987
32. Roy · 2001
33. Design optimization of cutting parameters for turning operations based on the Taguchi method10.1016/S0924-0136(98)00079-X ↗
34. Ross · 1988
35. Fisher · 1992 · 66
36. Lohninger · 2010 · vol. 5