journal article·2020-12

Exothermal behavior and microstructure of a LiNi1/3Mn1/3Co1/3O2 electrode layer using a Li4SnS4 solid electrolyte

Hirofumi Tsukasaki, Misae Otoyama, Takuya Kimura, Shigeo Mori, Atsushi Sakuda, Akitoshi Hayashi, Masahiro Tatsumisago

Publisher page

Abstract

Abstract A positive electrode containing Li3PS4 (LPS) glasses and LiNi1/3Mn1/3Co1/3O2 (NMC) is a promising candidate for sulfide-based all-solid-state lithium batteries owing to its excellent charge–discharge cycle characteristics. However, sulfide-based solid electrolytes exhibit low chemical stability in air. This disadvantage affects process cost and thermal stability of all-solid-state cells. To resolve these issues, in this study, we focus on solid electrolytes, Li4SnS4 (LSS), that do not generate H2S gas in air. The thermal behavior and microstructure of LSS–NMC positive electrode composites before and after the initial charge–discharge cycle are investigated. The initially charged LSS–NMC composites exhibit several exothermal reactions above 250 °C. However, pristine and initially discharged samples do not show any considerable exothermal reactions. For LPS–NMC composites, by contrast, exothermal reactions are detected regardless of the charging and discharging state. To clarify the exothermic factors of initially charged LSS–NMC composites, we performed ex situ transmission electron microscopy observation and X-ray diffraction measurements. It is determined that SnS2, transition metal sulfides, and metal oxides are formed above 300 °C, which is attributable to LSS and NMC decomposition reactions. On the basis of the relation between thermal behavior and corresponding structural changes, exothermic factors and thermal stability of LSS–NMC composites are discussed in comparison with LPS–NMC composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Minami · 2005
2. Progress and prospective of solid-state lithium batteries10.1016/j.actamat.2012.10.034 ↗
3. Discharge performance of all-solid-state battery using a lithium superionic conductor Li10GeP2S1210.5796/electrochemistry.80.749 ↗
4. Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries10.1016/j.jascer.2013.03.005 ↗
5. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
6. A lithium superionic conductor10.1038/nmat3066 ↗
7. New, highly ion-conductive crystals precipitated from Li2S–P2S5 glasses10.1002/adma.200401286 ↗
8. High lithium ion conducting glass-ceramics in the system Li2S–P2S510.1016/j.ssi.2006.04.017 ↗
9. Preparation and ionic conductivity of Li7P3S11−z glass-ceramic electrolytes10.1016/j.jnoncrysol.2010.04.048 ↗
10. Formation of superionic crystals from mechanically milled Li2S–P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
11. Crystallization behavior of the Li2S–P2S5 glass electrolyte in the LiNi1/3Mn1/3Co1/3O2 positive electrode layer10.1038/s41598-018-24524-7 ↗
12. Analysis of structural and thermal stability in the positive electrode for sulfide-based all-solid-state lithium batteries10.1016/j.jpowsour.2017.09.031 ↗
13. Preparation and electrochemical properties of LiAlO2-coated Li(Ni1/3Mn1/3Co1/3)O2 for all-solid-state batteries10.1016/j.ssi.2013.12.019 ↗
14. Ex situ investigation of exothermal behavior and structural changes of the Li3PS4-LiNi1/3Mn1/3Co1/3O2 electrode composites10.1016/j.ssi.2019.115046 ↗
15. Exothermal mechanisms in the charged LiNi1/3Mn1/3Co1/3O2 electrode layers for sulfide-based all-solid-state lithium batteries10.1016/j.jpowsour.2019.226714 ↗
16. Airstable, high-conduction solid electrolytes of arsenic-substituted Li4SnS410.1039/C3EE43357A ↗
17. Mechanochemical synthesis and characterization of metastable hexagonal Li4SnS4 solid electrolyte10.1021/acs.inorgchem.8b01049 ↗
18. Preparation and characterization of lithium ion conductive Li3SbS4 glass and glass-ceramic electrolytes10.1016/j.ssi.2019.01.017 ↗
19. An electrolyte strategy for suppressing side reactions at high temperature in all-solid-state lithium batteries
20. High contrast hollow-cone dark field transmission electron microscopy for nanocrystalline grain size quantification10.1016/j.micron.2009.11.008 ↗
21. Consistent indexing of a (set of) single crystal SAED pattern(s) with the ProcessDiffraction program10.1016/j.ultramic.2004.12.004 ↗
22. Electron diffraction based analysis of phase fractions and texture in nanocrystalline thin films, part I: Principles10.1017/S1431927608080380 ↗
23. Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry10.1016/j.jpowsour.2007.06.051 ↗
24. Minimization of the cation mixing in Li1+x(NMC)1−xO2 as cathode material10.1016/j.jpowsour.2009.09.029 ↗
25. Comparative study of LiCoO2, LiNiCoO2 and LiNiO2 for 4 volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗