journal article·2020-05

Degradation-conscious control for enhanced lifetime of automotive polymer electrolyte membrane fuel cells

Alireza Goshtasbi, Tulga Ersal

Publisher page

Abstract

Abstract A linear time varying model predictive control (LTV-MPC) framework is developed for degradation-conscious control of automotive polymer electrolyte membrane (PEM) fuel cell systems. A reduced-order nonlinear model of the entire system is derived first, including the reactant and coolant supply subsystems and the fuel cell stack. This nonlinear model is then successively linearized about the current operating point to obtain a linear model. The linear model is utilized to formulate the control problem using a rate-based MPC formulation. The controller objective is to ensure offset-free tracking of the power demand, while maximizing the overall system efficiency and enhancing its durability. To this end, the fuel consumption and the power loss due to auxiliary equipment are minimized. Moreover, the internal states of the fuel cell stack are constrained to avoid harmful conditions that are known stressors of the fuel cell components. Membrane dry-out, rapid changes in the membrane hydration, and reactant starvation are among the stressors considered in this work. However, the framework can accommodate further lifetime indicators as needed. Simulation-based studies showcase the utility of the proposed control framework in meeting the outlined objectives.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Mench · 2011
2. Materials research and development priorities for low cost automotive PEM fuel cells10.1016/j.coelec.2019.10.009 ↗
3. On the impact of water activity on reversal tolerant fuel cell anode performance and durability10.1016/j.jpowsour.2016.07.002 ↗
4. Understanding the voltage reversal behavior of automotive fuel cells10.1016/j.jpowsour.2018.06.083 ↗
5. Ultra-thin reinforced ionomer membranes to meet next generation fuel cell targets10.1149/1.3635683 ↗
6. Development of highly durable PFSA membrane and MEA for PEMFC under high temperature and low humidity conditions10.1149/1.2981964 ↗
7. Ceria and doped ceria nanoparticle additives for polymer fuel cell lifetime improvement10.1149/06403.0403ecst ↗
8. Nafion membranes reinforced with ceria-coated multiwall carbon nanotubes for improved mechanical and chemical durability in polymer electrolyte membrane fuel cells10.1021/jp5078399 ↗
9. Fuel cell durability enhancement with cerium oxide under combined chemical and mechanical membrane degradation10.1149/2.0081504eel ↗
10. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
11. Cathode loading impact on voltage cycling induced PEMFC degradation: a voltage loss analysis10.1149/2.0161806jes ↗
12. FC-PAD: fuel cell performance and durability consortium
13. Model-based control of fuel cells::(1) regulatory control10.1016/j.jpowsour.2004.04.008 ↗
14. Model-based control of fuel cells (2): optimal efficiency10.1016/j.jpowsour.2007.04.062 ↗
15. Control of fuel cell breathing10.1109/MCS.2004.1275430 ↗
16. Pukrushpan · 2004
17. “Empowering the performance of advanced NMPC by multiparametric programming – an application to a PEM fuel cell system10.1021/ie303477h ↗
18. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
19. A gain-scheduled LPV control for oxygen stoichiometry regulation in pem fuel cell systems10.1109/TCST.2013.2288992 ↗
20. Load governor for fuel cell oxygen starvation protection: a robust nonlinear reference governor approach10.1109/TCST.2005.854323 ↗
21. Constraint management in fuel cells: a fast reference governor approach
22. Constraint handling in a fuel cell system: a fast reference governor approach10.1109/TCST.2006.883242 ↗
23. Current management in a hybrid fuel cell power system: a model-predictive control approach10.1109/TCST.2006.880199 ↗
24. A decentralized model predictive control approach to power management of a fuel cell-ultracapacitor hybrid
25. Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system10.1016/j.jpowsour.2016.08.019 ↗
26. Durable high power membrane electrode assembly with low Pt loading
27. Characterizing durability of PFSA membranes of PEM fuel cell based on numerical fatigue crack propagation
28. Model-based analysis of PFSA membrane mechanical response to relative humidity and load cycling in PEM fuel cells10.1149/2.0371806jes ↗
29. Accelerated stress testing of fuel cell membranes subjected to combined mechanical/chemical stressors and cerium migration10.1149/2.0241806jes ↗
30. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
31. Prevention of fuel cell starvation by model predictive control of pressure, excess ratio, and current10.1016/j.jpowsour.2008.12.089 ↗
32. Power control for efficient operation of a PEM fuel cell system by nonlinear model predictive control10.1016/j.ifacol.2015.09.179 ↗
33. Model predictive control of polymer electrolyte membrane fuel cell with dead-end anode and periodic purging
34. On-line nonlinear model predictive control of a PEM fuel cell system10.1016/j.jprocont.2013.01.011 ↗
35. Enhancing the efficiency and lifetime of a proton exchange membrane fuel cell using nonlinear model-predictive control with nonlinear observation10.1109/TIE.2017.2682787 ↗
36. Gain-scheduling MPC of nonlinear systems10.1002/rnc.819 ↗
37. Receding horizon control of an F-16 aircraft: a comparative study10.1016/j.conengprac.2005.06.003 ↗
38. Linear time-varying model predictive control and its application to active steering systems: stability analysis and experimental validation10.1002/rnc.1245 ↗
39. Computationally efficient pseudo-2D non-isothermal modeling of polymer electrolyte membrane fuel cells with two-phase phenomena10.1149/2.0871613jes ↗
40. A real-time pseudo-2D bi-domain model of PEM fuel cells for automotive applications
41. A mathematical model toward real-time monitoring of automotive PEM fuel cells
42. Through-the-membrane transient phenomena in PEM fuel cells: a modeling study10.1149/2.0181907jes ↗
43. Pt-oxide coverage-dependent oxygen reduction reaction (ORR) kinetics10.1149/2.088205jes ↗
44. Physical modeling of polymer-electrolyte membrane fuel cells: understanding water management and impedance spectra10.1016/j.jpowsour.2018.04.070 ↗
45. Modeling and experimental validation of Pt loading and electrode composition effects in PEM fuel cells10.1149/2.0221508jes ↗
46. Suh · 2006
47. Time-dependent mechanical response of a composite PFSA membrane10.1016/j.jpowsour.2012.11.116 ↗
48. Fuel cell perfluorinated sulfonic acid membrane degradation correlating accelerated stress testing and lifetime10.1021/cr200424d ↗
49. Bernstein · 2009
50. Pannocchia · 2001
51. A robust MPC algorithm for offset-free tracking of constant reference signals10.1109/TAC.2013.2254011 ↗
52. Design and vehicle implementation of preview active suspension controllers10.1109/TCST.2013.2272342 ↗
53. Automotive applications of model predictive control
54. Modeling of catalyst structure degradation in PEM fuel cells
55. Borrelli · 2017
56. The explicit linear quadratic regulator for constrained systems10.1016/S0005-1098(01)00174-1 ↗
57. CasADi – a software framework for nonlinear optimization and optimal control10.1007/s12532-018-0139-4 ↗
58. Stellato · 2017
59. Distributed optimization and statistical learning via the alternating direction method of multipliers10.1561/2200000016 ↗
60. Stochastic driver modeling and validation with traffic data
61. Sciarretta · 2019