journal article·2020-04Open access

Iron doped manganese cobaltite spinel coatings produced by electrophoretic co-deposition on interconnects for solid oxide cells: Microstructural and electrical characterization

E. Zanchi, S. Molin, A.G. Sabato, B. Talic, G. Cempura, A.R. Boccaccini, F. Smeacetto

Abstract

Abstract We report a systematic microstructural and electrical characterization of iron doped Mn–Co spinel coatings processed by electrophoretic co-deposition of Mn1.5Co1.5O4 and Fe2O3 powders on Crofer 22 APU and AISI 441 steel substrates. Iron addition to Mn–Co spinel coating leads to a reduction of the area specific resistance on both substrates, after 3200 h at 750 °C. The Fe doped Mn–Co coating both leads to a thinner oxide scale and reduces the sub scale oxidation for the Crofer 22 APU substrate. Fe doped Mn–Co on AISI 441 shows both a thicker oxide scale and low area specific resistance values, likely due to a doping effect of the oxide scale by minor alloying elements. The different mechanisms by which iron doping of Mn–Co spinels can influence elemental interdiffusion at the steel-oxide scale-coating interfaces and relative contributions to the overall area specific resistance are evaluated by means of advanced electron microscopy. The promising results are further confirmed in a cell test, where the Fe doped MnCo coated interconnect does not induce any degradation of the oxygen electrode, proving its efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
2. Recent advances in metallic interconnects for solid oxide fuel cells10.1179/174328007X212526 ↗
3. Exploration of alloy 441 chemistry for solid oxide fuel cell interconnect application10.1016/j.jpowsour.2009.08.023 ↗
4. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
5. Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings10.1016/S0025-5408(01)00506-2 ↗
6. A short review of cathode poisoning and corrosion in solid oxide fuel cell10.1016/j.ijhydene.2017.08.057 ↗
7. Chromium vaporization from high-temperature alloys10.1149/1.2434690 ↗
8. The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for Solid Oxide Fuel Cells10.1016/j.jpowsour.2015.04.040 ↗
9. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
10. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
11. Electrophoretic deposition of Mn1.5Co1.5O4 on metallic interconnect and interaction with glass-ceramic sealant for solid oxide fuel cells application10.1016/j.jpowsour.2015.01.120 ↗
12. Synthesis of manganese-cobalt spinel via wet chemistry methods and its properties10.1016/j.ceramint.2017.08.116 ↗
13. Microstructure and electrical properties of Mn1+xCo2−xO4 (0≤x≤1.5) spinels synthesized using EDTA-gel processes10.1016/j.ceramint.2014.05.106 ↗
14. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties10.1016/j.ssi.2004.10.004 ↗
15. (Mn,Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications10.1016/j.ijhydene.2006.08.048 ↗
16. Oxidation kinetics of Mn 1.5Co1.5O4-coated haynes 230 and crofer 22 APU for solid oxide fuel cell interconnects10.1149/1.3391820 ↗
17. Microstructural and electrical characterization of Mn-Co spinel protective coatings for solid oxide cell interconnects10.1016/j.jeurceramsoc.2017.07.011 ↗
18. Highly dense Mn-Co spinel coating for protection of metallic interconnect of solid oxide fuel cells10.1149/2.0541414jes ↗
19. Mn–Co spinel protective–conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications10.1007/s10008-012-1952-8 ↗
20. Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.04.023 ↗
21. Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.10.060 ↗
22. Thermal expansion and electrical conductivity of Fe and Cu doped MnCo2O4spinel10.1016/j.ssi.2018.09.018 ↗
23. The effect of chemical composition on high temperature behaviour of Fe and Cu doped Mn-Co spinels10.1016/j.ceramint.2016.11.135 ↗
24. Microstructure and phase evolution of atmospheric plasma sprayed Mn-Co-Fe oxide protection layers for solid oxide fuel cells10.1016/j.jeurceramsoc.2018.08.027 ↗
25. Low temperature processed MnCo2O4and MnCo1.8Fe0.2O4 as effective protective coatings for solid oxide fuel cell interconnects at 750 °C10.1016/j.jpowsour.2016.11.011 ↗
26. The structure and properties of plasma sprayed iron oxide doped manganese cobalt oxide spinel coatings for SOFC metallic interconnectors10.1007/s11666-010-9598-5 ↗
27. High-temperature oxidation of the Crofer 22 H ferritic steel with Mn1.45Co1.45Fe0.1O4 and Mn1.5Co1.5O4 spinel coatings under thermal cycling conditions and its properties10.1016/j.matchemphys.2018.12.090 ↗
28. In-situ Cu-doped MnCo-spinel coatings for solid oxide cell interconnects processed by electrophoretic deposition10.1016/j.ceramint.2019.06.161 ↗
29. Electrophoretic co-deposition of Fe2O3 and Mn1,5Co1,5O4: processing and oxidation performance of Fe-doped Mn-Co coatings for solid oxide cell interconnects10.1016/j.jeurceramsoc.2019.05.024 ↗
30. Crystal structure, chemical stabilities and electrical conductivity of Fe-doped manganese cobalt spinel oxides for SOFC interconnect coatings10.1149/2.114311jes ↗
31. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
32. Deposition and evaluation of protective PVD coatings on ferritic stainless steel SOFC interconnects10.1149/1.2266244 ↗
33. Investigation of iron-chromium-niobium-titanium ferritic stainless steel for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2008.05.037 ↗
34. Adhesion of oxide scales grown on ferritic stainless steels in solid oxide fuel cells temperature and atmosphere conditions10.1016/j.jpowsour.2007.06.058 ↗
35. Electrical conductivity of the manganese chromite spinel solid solution10.1111/j.1551-2916.2005.00205.x ↗
36. Break down of losses in thin electrolyte SOFCs10.1002/fuce.200500113 ↗
37. Detailed characterization of anode-supported SOFCs by impedance spectroscopy10.1149/1.2433311 ↗
38. CuMn 1.8 O 4 protective coatings on metallic interconnects for prevention of Cr-poisoning in solid oxide fuel cells10.1016/j.jpowsour.2017.12.031 ↗
39. Thermal growth and performance of manganese cobaltite spinel protection layers on ferritic stainless steel SOFC interconnects10.1149/1.1990462 ↗
40. Electrical and microstructural characterization of spinel phases as potential coatings for SOFC metallic interconnects10.1016/j.jpowsour.2005.03.137 ↗
41. Effect of reactive elements on oxidation behaviour of Fe-22Cr-0.5Mn ferritic stainless steel for a solid oxide fuel cell interconnect10.1016/j.jpowsour.2007.12.026 ↗
42. Formation of spinel reaction layers in manganese cobaltite-coated Crofer22 APU for solid oxide fuel cell interconnects10.1016/j.jpowsour.2012.07.091 ↗
43. Interactions between SOFC interconnect coating materials and chromia10.1111/j.1551-2916.2011.04749.x ↗
44. Electrical properties, cation distributions, and thermal expansion of manganese cobalt chromite spinel oxides10.1111/jace.12254 ↗
45. Diffusion couple study of the interaction between Cr2O3 and MnCo2O4 doped with Fe and Cu10.1016/j.ssi.2019.01.008 ↗
46. Effects of alloy heat treatment on oxidation kinetics and scale morphology for crofer 22 APU10.1016/j.jpowsour.2013.03.181 ↗
47. Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU10.1016/j.corsci.2018.04.016 ↗
48. The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales10.1016/0921-5093(95)09798-8 ↗
49. Fe doped Ni–Co spinel protective coating on ferritic stainless steel for SOFC interconnect application10.1016/j.ijhydene.2013.06.105 ↗
50. Diffusion of oxygen in the scales of Fe-Cr alloy interconnects and oxide coating layer for solid oxide fuel cells10.1016/j.ssi.2008.07.024 ↗
51. Evaluation of Laves-phase forming Fe-Cr alloy for SOFC interconnects in reducing atmosphere10.1016/j.jpowsour.2007.10.041 ↗
52. Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects10.1016/j.ijhydene.2013.09.044 ↗
53. Oxidation resistance of novel ferritic stainless steels alloyed with titanium for SOFC interconnect applications10.1016/j.jpowsour.2008.02.010 ↗
54. Metallic interconnectors for solid oxide fuel cells – a review
55. Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects10.1016/j.corsci.2010.06.006 ↗
56. Electrical conductivity of Cr2O3 doped with La2O3, Y2O3 and NiO10.2320/matertrans1960.24.581 ↗
57. Oxidation behavior of ferritic stainless steel containing Nb, Nb-Si and Nb-Ti for SOFC interconnect10.1016/j.ijhydene.2012.12.073 ↗