A solid-electrolyte-reinforced separator through single-step electrophoretic assembly for safe high-capacity lithium ion batteries
Source abstract
Abstract
Abstract In rechargeable lithium ion batteries (LIBs), the separator undergoes stresses in repeated charge and discharge processes. Polyvinylidene fluoride (PVDF) gel separators own excellent thermal stability and electrolyte wettability, but their limited mechanical strength cannot sustain severe strains under the conditions of large Li ion fluxes, mechanical and thermal shocks of batteries. In this report, a solid-electrolyte-reinforced gel separator is prepared through a single-step electrophoretic deposition on a stable surfactant-free colloid of PVDF-HFP and Al-doped Li6.75La3Zr1.75Ta0.25O12 (LLZTO). The LLZTO/PVDF-HFP separator owns a 3D laminated structure, a mechanical strength of 28.6 MPa, a room-temperature ionic conductivity of 7.13 × 10−4 S cm−1 and improved thermal stability. With the LLZTO/PVDF-HFP separator, LiFePO4 LIBs deliver a threshold discharge capacity of 170 mAh g−1 at 0.1 C and stable cycling with nearly zero capacity decay over 100 cycles at 0.5 C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Colossal ionic conductivity at interfaces of epitaxial ZrO2: Y2O3/SrTiO3 heterostructures10.1126/science.1156393 ↗
2. Flexible electronics based on one-dimensional and two-dimensional hybrid nanomaterials.
3. Practical Challenges in Employing Graphene for Lithium-Ion Batteries and Beyond.10.1002/smtd.201700099 ↗
4. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
5. Probing Battery Electrochemistry with In Operando Synchrotron X-Ray Imaging Techniques10.1002/smtd.201700293 ↗
6. Carbon-nanotube-decorated nano-LiFePO4@C cathode material with superior high-rate and low-temperature performances for lithium-ion batteries10.1002/aenm.201300159 ↗
7. Oxyvanite V3O5: A new intercalation-type anode for lithium-ion battery10.1002/inf2.12011 ↗
8. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
9. Nanoparticle-on-nanofiber hybrid membrane separators for lithium-ion batteries via combining electrospraying and electrospinning techniques10.1016/j.memsci.2014.01.022 ↗
10. Lithium-ion batteries with high charge rate capacity: influence of the porous separator10.1016/j.jpowsour.2007.07.018 ↗
11. Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries10.1126/sciadv.1601978 ↗
12. Si-, Ge-, Sn-Based Anode Materials for Lithium-Ion Batteries: From Structure Design to Electrochemical Performance10.1002/smtd.201600037 ↗
13. An upgraded lithium ion battery based on a polymeric separator incorporated with anode active materials10.1002/aenm.201803627 ↗
14. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
15. Solvothermal synthesis of lithium iron phosphate nanoplates10.1039/c0jm04126b ↗
16. Novel efficient synthesis of nanosized carbon coated LiMnPO4 composite for lithium ion batteries and its electrochemical performance10.1016/j.jpowsour.2014.06.020 ↗
17. Tartaric acid assisted carbonization of LiFePO4 synthesized through in-situ hydrothermal process in aqueous glycerol solution10.1016/j.electacta.2017.10.123 ↗
18. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
19. Prawn shell derived chitin nanofiber membranes as advanced sustainable separators for Li/Na-ion batteries10.1021/acs.nanolett.7b01875 ↗
20. A materials perspective on Li-ion batteries at extreme temperatures10.1038/nenergy.2017.108 ↗
21. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes10.1016/j.memsci.2004.06.011 ↗
22. Structure and performance of porous polymer electrolytes based on PVDF-HFP for lithium ion batteries10.1016/S0378-7753(01)00868-0 ↗
23. Composite of a nonwoven fabric with poly (vinylidene fluoride) as A gel membrane of high safety for lithium ion battery10.1039/C2EE23564A ↗
24. A composite gel polymer electrolyte with high performance based on poly (vinylidene fluoride) and polyborate for lithium ion batteries10.1002/aenm.201300647 ↗
25. A sodium ion conducting gel polymer electrolyte10.1016/j.ssi.2014.11.015 ↗
26. Dendrite-free Li-metal battery enabled by A thin asymmetric solid electrolyte with engineered layers10.1021/jacs.7b10864 ↗
27. The role of mechanically induced separator creep in lithium-ion battery capacity fade10.1016/j.jpowsour.2011.05.023 ↗
28. A multi-scale Approach for the stress analysis of polymeric separators in A lithium-ion battery10.1016/j.jpowsour.2010.06.020 ↗
29. Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery10.1016/j.jpowsour.2012.09.096 ↗
30. An efficient, scalable route to robust PVDF‐co‐HFP/SiO2 separator for long‐cycle lithium ion batteries
31. Flame-Retardant bilayer separator with multifaceted van der Waals interaction for lithium-ion batteries10.1021/acsami.9b08553 ↗
32. Densification and ionic-conduction improvement of lithium garnet solid electrolytes by flowing oxygen sintering10.1016/j.jpowsour.2013.09.140 ↗
33. Highly efficient materials assembly via electrophoretic deposition for electrochemical energy conversion and storage devices10.1002/aenm.201502018 ↗
34. Micro-porous P(VDF-HFP)-Based polymer electrolyte filled with Al2O3 nanoparticles10.1016/j.ssi.2005.05.006 ↗
35. Silica-composite nonwoven separators for lithium-ion battery: development and characterization10.1149/1.2956965 ↗
36. A powder particle size effect on ceramic powder based separator for lithium rechargeable battery10.1016/j.jpowsour.2005.03.159 ↗
37. A novel intrinsically porous separator for self-standing lithium-ion batteries10.1016/S0013-4686(02)00601-1 ↗
38. Effect of plasticizers (EC or PC) on the ionic conductivity and thermal properties of the (PEO)9LiTf: Al2O3 nanocomposite polymer electrolyte system10.1007/s10008-008-0505-7 ↗
39. Highly efficient PVDF-HFP/colloidal alumina composite separator for high-temperature lithium-ion batteries10.1002/admi.201701147 ↗
40. Effects of Li source on microstructure and ionic conductivity of Al-contained Li6.75La3Zr1.75Ta0.25O12 ceramics10.1016/j.jeurceramsoc.2014.09.007 ↗
41. Revisiting the delta-phase of poly (vinylidenefluoride) for solution-processed ferroelectric thin films10.1038/nmat3577 ↗
42. Influence of polymer concentration and dyes on photovoltaic performance of dye-sensitized solar cell with P(VdF-HFP)-Based gel polymer electrolyte10.1016/j.jpowsour.2008.06.063 ↗
43. Studies on poly (vinylidene fluoride-co-hexafluoropropylene) based gel electrolyte nanocomposite for sodium-sulfur batteries10.1016/j.ssi.2011.09.001 ↗
44. Flame retardant and stable Li1.5Al0.5Ge1.5(PO4)3-supported ionic liquid gel polymer electrolytes for high safety rechargeable solid-state lithium metal batteries10.1021/acs.jpcc.8b02693 ↗
45. Phase transfer catalysis in dehydrofluorination of poly (vinylidene fluoride) by aqueous sodium hydroxide solutions
46. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly (vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
47. Raman, morphology and electrical behavior of nanocomposites based on PEO/PVDF with multi-walled carbon nanotubes10.1016/j.rinp.2015.04.005 ↗
48. High-performance PE-BN/PVDF-HFP bilayer separator for lithium-ion batteries10.1002/admi.201801330 ↗
49. A highly-efficient composite separator with strong ligand interaction for high-temperature lithium-ion batteries10.1002/celc.201800800 ↗
50. PEO/Garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic”10.1016/j.nanoen.2017.12.037 ↗
51. All solid state lithium batteries based on lamellar garnet-type ceramics electrolyte10.1016/j.jpowsour.2015.09.061 ↗
52. A sandwich structure polymer/polymer-ceramics/polymer gel electrolytes for the safe, stable cycling of lithium metal batteries10.1016/j.memsci.2018.03.038 ↗
53. Improved performances of lithium-ion batteries with A separator based on inorganic fibers10.1039/C6TA08404D ↗
54. Nanocomposite polymer membrane derived from nano TiO2-PMMA and glass fiber nonwoven: high thermal endurance and cycle stability in lithium ion battery applications
55. Robust polyimide nanofibrous membrane with porous-lyer-cated morphology by in situ self-bonding and micro-crosslinking for lithium-ion battery separator10.1039/C8NR07548D ↗
56. Highly lithium ion conductive, Al2O3 decorated electrospun P(VDF-TrFE) membranes for lithium ion battery separators10.1039/C8NJ01907J ↗
57. Polydopamine-coated cellulose microfibrillated membrane as high performance lithium-ion battery separator10.1039/c3ra45879b ↗
58. A novel poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separator with phase inversion-controlled microporous structure for A lithium-ion battery10.1039/c0jm01086c ↗
59. Controlled pore evolution during phase inversion from the combinatorial non-solvent approach: application to battery separators10.1039/C6TA02472F ↗
60. Ionic liquid functionalized electrospun gel polymer electrolyte for use in A high-performance lithium metal battery10.1039/C8TA06338A ↗
61. Insights into A Layered hybrid solid electrolyte and its application in long lifespan high-voltage all solid-state lithium batteries10.1039/C8TA11259B ↗
62. A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine–ceramic composite modification of polyolefin membranes10.1039/C6EE01219A ↗
63. Structure, ion transport, and relaxation dynamics of polyethylene oxide/poly (vinylidene fluoride co-hexafluoropropylene)-lithium bis (trifluoromethanesulfonyl) -imide blend polymer electrolyte embedded with ionic liquid10.1063/1.4942658 ↗
64. Reversible formation and decomposition of LiF clusters using transition mater fluorides as precursors and their application in rechargeable Li batteries