journal article·2020-01

Non-destructive parameter extraction for a reduced order lumped electrochemical-thermal model for simulating Li-ion full-cells

Benjamin Ng, Paul T. Coman, William E. Mustain, Ralph E. White

Publisher page

Abstract

Abstract Rapid voltage and temperature estimations with a Reduced Order Lumped Electrochemical-Thermal Model (TLM) was developed by applying a State Space Approach to transform partial differential equations (PDEs) into ordinary differential equations (ODEs). The TLM is attractive for Battery Management Systems (BMS) because of model restrictions that result in only four parameters: exchange current (i0S), diffusion time constant (τ), internal resistance (RIR), and the entropic heat coefficient (dUdT−1). The State Space approach is shown to be an effective method for reducing the computational time for the model by greater than 50% (~2s to less than 1s). This study also shows that the required model parameters (i0S, τ, RIR, dUdT−1) can be nondestructively extracted from real cells using the galvanostatic intermittent titration technique (GITT). This allows us to create cell-level temperature and state of charge (SOC) parameter surfaces that would be nearly impossible to develop experimentally. By confirming the extracted parameters with the model predicted parameters, future BMS models can further reduce computational time (approach millisecond predictions) by experimentally constraining the model. This means that the methodology reported in this paper can be ubiquitously implemented for other battery chemistries (e.g. cathodes, anodes), formats (e.g. 18650, pouch, prismatic), and properties (e.g. capacity ratios).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
2. Power electronics contribution to renewable energy conversion addressing emission reduction: applications, issues, and recommendations10.1016/j.apenergy.2019.113404 ↗
3. Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries10.1039/C8TA05336G ↗
4. Fast charging lithium batteries: Recent progress and future prospects10.1002/smll.201805389 ↗
5. High temperature electrical energy storage: Advances, challenges, and frontiers10.1039/C6CS00012F ↗
6. Experimental study on module-to-module thermal runaway-propagation in a battery pack10.1149/2.1011910jes ↗
7. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
8. Remaining useful life assessment of lithium-ion batteries in implantable medical devices10.1016/j.jpowsour.2017.11.056 ↗
9. The future of lithium and lithium-ion batteries in implantable medical devices10.1016/S0378-7753(01)00648-6 ↗
10. Emissions from urban bus fleets running on biodiesel blends under real-world operating conditions: implications for designing future case studies10.1016/j.rser.2019.05.004 ↗
11. Aprotic and aqueous Li-O2 batteries10.1021/cr400573b ↗
12. State of the art of lithium-ion battery SOC estimation for electrical vehicles
13. Big data driven lithium-ion battery modeling method based on SDAE-ELM algorithm and data pre-processing technology10.1016/j.apenergy.2019.03.154 ↗
14. Data-driven prediction of battery cycle life before capacity degradation10.1038/s41560-019-0356-8 ↗
15. Fault prognosis of battery system based on accurate voltage abnormity prognosis using long short-term memory neural networks10.1016/j.apenergy.2019.113381 ↗
16. A new neural network model for the state-of-charge estimation in the battery degradation process10.1016/j.apenergy.2014.01.066 ↗
17. A coupled nonlinear equivalent circuit-Thermal model for lithium ion cells10.1016/j.jpowsour.2012.11.044 ↗
18. Towards better estimability of electrode-specific state of health: decoding the cell expansion10.1016/j.jpowsour.2019.03.104 ↗
19. J. Relaxation phenomena in lithium-ion-insertion cells
20. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
21. A single particle model with chemical/mechanical degradation physics for lithium ion battery State of Health (SOH) estimation10.1016/j.apenergy.2018.01.011 ↗
22. Low-temperature charging of lithium-ion cells part I: electrochemical modeling and experimental investigation of degradation behavior10.1016/j.jpowsour.2013.12.022 ↗
23. A simplified electrochemical and thermal aging model of LiFePO4-graphite Li-ion Batteries : power and capacity fade simulations10.1149/2.053304jes ↗
24. Two-dimensional electrochemical e thermal coupled modeling of cylindrical LiFePO4 batteries10.1016/j.jpowsour.2014.01.070 ↗
25. Electrochemical – thermal analysis of 18650 lithium iron phosphate cell10.1016/j.enconman.2013.05.040 ↗
26. Electro-thermal cycle life model for lithium iron phosphate battery10.1016/j.jpowsour.2012.06.055 ↗
27. Thermal behaviour investigation of a large and high power lithium iron phosphate cylindrical cell10.3390/en80910017 ↗
28. J. In situ analytical techniques for battery interface analysis10.1039/C7CS00180K ↗
29. An improved electro-thermal battery model complemented by current dependent parameters for vehicular low temperature application10.1016/j.apenergy.2019.04.066 ↗
30. Optimized temperature effect of Li-ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery10.1002/aenm.201501309 ↗
31. Nonlinear state-variable method for solving physics-based Li-ion cell model with high-frequency inputs10.1149/2.0021711jes ↗
32. An adaptive reduced-order-modeling approach for simulating real-time performances of Li-ion battery systems10.1149/2.0501714jes ↗
33. Single-particle model for a lithium-ion cell: thermal behavior10.1149/1.3521314 ↗
34. Full cell parameterization of a high-power lithium-ion battery for a physico-chemical model: Part I. Physical and electrochemical parameters10.1149/2.0321816jes ↗
35. Full cell parameterization of a high-power lithium-ion battery for a physico-chemical model: Part II. Thermal parameters and validation10.1149/2.0331816jes ↗
36. Galvanostatic intermittent titration and performance based analysis of LiNi0.5Co0.2Mn0.3O2 cathode10.1149/2.1701713jes ↗
37. Comparison of lumped diffusion models for voltage prediction of a lithium-ion battery cell during dynamic loads10.1016/j.jpowsour.2018.09.020 ↗
38. Optimized operating range for large-format LiFePO4/graphite batteries10.1149/2.052403jes ↗
39. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
40. Predicting and extending the lifetime of Li-ion batteries10.1149/2.060309jes ↗
41. How observable is lithium plating? Differential voltage analysis to identify and quantify lithium plating following fast charging of cold lithium-ion batteries10.1149/2.0821904jes ↗
42. Analysis of capacity fade from entropic heat coefficient of Li[NixCoyMnz]O2/graphite lithium ion battery10.1149/2.0311605jes ↗
43. Intercalation compounds from LiH and graphite: Relative stability of metastable stages and thermodynamic stability of dilute stage Id10.1021/acs.chemmater.5b00235 ↗
44. Electrochemical modeling and performance of a lithium- and manganese-rich layered transition-metal oxide positive electrode10.1149/2.0231504jes ↗
45. Electrochemical modeling of intercalation processes with phase field models10.1016/j.electacta.2004.05.024 ↗
46. Volume changes of graphite anodes revisited: a combined operando X-ray diffraction and in situ pressure analysis study10.1021/acs.jpcc.8b01873 ↗
47. Quantification and modeling of mechanical degradation in lithium-ion batteries based on nanoscale imaging10.1038/s41467-018-04477-1 ↗
48. Origin of graphite exfoliation. An investigation of the important role of solvent cointercalation10.1149/1.1394076 ↗
49. Thermal management of large-format prismatic lithium-ion battery in PHEV application10.1149/2.09411602jes ↗
50. Cengel · 2003
51. Determination of diffusion coefficients using impedance spectroscopy data10.1149/2.1151814jes ↗
52. Effect of porosity on the capacity fade of a lithium-ion battery10.1149/1.1759972 ↗
53. Determination of the chemical diffusion coefficient of lithium ions in spherical Li[Ni0.5Mn0.3Co0.2]O210.1016/j.electacta.2012.01.061 ↗