Development of manganese-rich cathodes as alternatives to nickel-rich chemistries
Source abstract
Abstract
Abstract High-energy, inexpensive and safe electrochemistries have been the main goals of lithium-ion battery research for many years. Historically, manganese-based cathodes have long been studied for their attractive cost and safety characteristics [1]. However, due to issues related to both surface and bulk instabilities, manganese-rich electrodes have yet to find substantial success in the high-energy lithium-ion battery market. With current trends in cathode chemistries leaning heavily toward Ni-rich compositions, the factors of cost and safety are again at the forefront of research and development efforts. This paper reports the recent progress made at Argonne National Laboratory (USA) to stabilize manganese-rich cathode structures and surfaces with a specific focus on composite materials with intergrown layered and spinel components; it presents an overview of their electrochemical properties in terms of capacity, energy, and cycle-life in cells with metallic lithium, graphite, and Li4Ti5O12 anodes. These layered-spinel cathodes show promise as alternatives to highly nickel-rich electrode compositions, which bodes well for continued advances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. The quest for manganese-rich electrodes for lithium batteries: strategic design and electrochemical behavior10.1039/C8SE00157J ↗
2. Oxygen Release and its Effect on the cycling Stability of LiNixMnyCozO2 (NMC) cathode Materials for Li-ion batteries10.1149/2.0021707jes ↗
3. Electrolyte-induced surface Transformation and transition-metal Dissolution of fully delithiated LiNi0.8Co0.15Al0.05O210.1021/acs.langmuir.7b00863 ↗
4. Cycling behavior of NCM523/graphite lithium-ion cells in the 3-4.4 V range: diagnostic studies of full cells and harvested electrodes10.1149/2.0081701jes ↗
5. The significance of the Li2MnO3 component in 'composite' xLi2MnO3•(1-x)LiMn0.5Ni0.5O2 electrodes10.1016/j.elecom.2004.08.002 ↗
6. High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g(-1)10.1039/c0jm04325g ↗
7. Examining Hysteresis in Composite xLi2MnO3•(1-x)LiMO2 cathode structures10.1021/jp312658q ↗
8. Countering the voltage Decay in high Capacity xLi2MnO3•(1-x)LiMO2 electrodes (M=Mn, Ni, Co) for Li+-Ion batteries10.1149/2.080206jes ↗
9. Correlating hysteresis and voltage fade in lithium- and manganese-rich layered transition-metal oxide electrodes10.1016/j.elecom.2013.04.022 ↗
10. Review of the US department of energy's "Deep dive" effort to understand voltage fade in Li- and Mn-rich cathodes10.1021/acs.accounts.5b00277 ↗
11. Quantifying Hysteresis and voltage Fade in xLi2MnO3•(1-x)LiMn0.5Ni0.5O2 Electrodes as a Function of Li2MnO3 content10.1149/2.049403jes ↗
12. Examining the electrochemical impedance at low states of charge in lithium- and manganese-rich layered transition-metal oxide electrodes10.1149/2.0931507jes ↗
13. Christensen · 2019
14. Advances in stabilizing 'Layered-Layered' xLi2MnO3•(1-x)LiMO2 (M=Mn, Ni, Co) Electrodes with a spinel component10.1149/2.0681414jes ↗
15. Thackeray composite ‘Layered-Layered-Spinel’ cathode Strcutures for lithium-ion batteries10.1149/2.049301jes ↗
16. The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries10.1039/C5EE03048J ↗
17. First-charge instabilities of layered-layered lithium-ion-battery materials10.1039/C5CP02943K ↗
18. Prospects for spinel-stabilized, high-capacity lithium-ion battery cathodes10.1016/j.jpowsour.2016.10.015 ↗
19. Croy, J. R.; Balasubramanian, M.; Park, J.-S. High Valent Lithiated Surface Structures for Lithium Ion Battery Electrode Materials. U.S. Patent Pub. No.: 20190013518 2019.
20. Croy, J. R.; Gutierrez, A.; Thackeray, M. M.; He, M. Surface Treatment for Lithium Battery Electrode Materials. U.S. Patent Pub. No.: 20180254483 2018.
21. Advances in spinel Li4Ti5O12 anode materials for lihtium-ion batteries10.1039/C4NJ01390E ↗
22. Nickel, Manganese, and cobalt dissolution from Ni-rich NMCS and their effects on NMC622-graphite cells10.1149/2.1151902jes ↗
23. Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in lithium-ion full cells10.1149/2.1111702jes ↗
24. Enabling high-energy, high-voltage lithium-ion cells: stadardization of coin-cell assembly, electrochemical testing, and evaluation of full cells10.1149/2.0691614jes ↗
25. Positive electrode passivation by LiDFOB electrolyte additive in high-capacity lithium-ion cells10.1149/2.083212jes ↗
26. Effect of electrolyte composition on rocksalt surface degradation in NMC cathodes durin high-voltage potentiaostatic holds10.1016/j.nanoen.2018.10.065 ↗
27. Fluorinated electrolytes for 5 V lithium-ion battery chemistry10.1039/c3ee24414h ↗
28. Preformed anodes for high-voltage lithium-ion battery performance: fluorinated electrolytes, crosstalk, and the origins of impedance rise10.1149/2.0611814jes ↗