Effect of the ceramic membrane properties on the microbial fuel cell power output and catholyte generation
Source abstract
Abstract
Ceramic membranes for MFCs offer a low cost alternative to the expensive ion exchange membranes, whilst promoting catholyte accumulation. However, their physicochemical properties need to be optimised, in order to increase the power output and the catholyte quality from MFCs. Two compositions of fine fire clay (FFC) cured under three firing cycles were manufactured, analysed and tested as ion-exchange and structural material for MFCs. The samples were characterised by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The power and catholyte generated from the ceramic MFCs with different FFC types was also evaluated. The results show a direct correlation between the ohmic resistance, the MFC power generation and the water absorption of the ceramics, giving a maximum power of 1 mW from the MFC with the most absorptive FFC (16.37% water absorbance). A slightly more alkaline catholyte was synthesised from the MFCs with higher water absorption FFC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Supercapacitor Materials and Fabrication · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Alfaro · Bioresour. Technol. · 2018 · 258 · 14210.1016/j.biortech.2018.02.087 ↗
2. Barbir · 2005 · 39
3. Impedance spectroscopy of reactive polymers. 110.1002/polb.1994.090321509 ↗
4. 18O Diffusion in nano crystalline ZrO210.1016/S0965-9773(99)00255-X ↗
5. Brug · J. Electroanal. Chem. · 1984 · 176 · 27510.1016/S0022-0728(84)80324-1 ↗
6. The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic-chloritic clays10.1016/S0169-1317(01)00076-X ↗
7. Electrical test methods for on-line fuel cell ohmic resistance measurement10.1016/j.jpowsour.2006.02.086 ↗
8. Technological characterization of clay materials: experimental methods and data interpretation
9. Techno-productive potential of photosynthetic microbial fuel cells through different configurations10.1016/j.rser.2014.07.116 ↗
10. Simultaneous electricity generation and microbially-assisted electrosynthesis in ceramic MFCs10.1016/j.bioelechem.2015.03.001 ↗
11. Investigation of corrosion inhibition efficiency of some synthesized water soluble terpolymers on N-80 steel in HCl, NaCl and simulated oil well water10.4152/pea.201502085 ↗
12. Urine utilization by microbial fuel cells: energy fuel for the future10.1039/C1CP23213D ↗
13. Pee power urinal microbial fuel cell technology field trials in the context of sanitation10.1039/C5EW00270B ↗
14. Casting and sintering of a sanitaryware body containing fine fire clay (FFC)10.1007/s41779-016-0020-8 ↗
15. Exoelectrogens: recent advances in molecular drivers involved in extracellular electron transfer and strategies used to improve it for microbial fuel cell applications10.1016/j.rser.2015.12.029 ↗
16. Laraminie · 2000 · 37
17. Impedance sspectroscopy of grain boundaries in nanophase ZnO10.1557/JMR.1995.2295 ↗
18. An effective synthetic route for a novel electrolyte: nanocrystalline solid solutions of (CeO2)1–x(BiO1.5)x10.1002/(SICI)1521-4095(199902)11:2<146::AID-ADMA146>3.0.CO;2-7 ↗
19. Novel ceramic membranes for electrodialysis10.1016/S1383-5866(01)00090-9 ↗
20. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
21. Possibilities to control ceramics properties by changing firing cycles10.1016/j.conbuildmat.2007.12.012 ↗
22. Energy by Microbial Fuel Cells: scientometric global synthesis and challenges10.1016/j.rser.2016.06.050 ↗
23. Electricity and catholyte production from ceramic MFCs treating urine10.1016/j.ijhydene.2016.09.163 ↗
24. Merino-Jimenez · 2019
25. Advanced technology for making PZT type ceramics by fast firing
26. Enhance specific grain boundary conductivity in nanocrystalline Y2O3-stabilized zirconia10.1016/S0167-2738(98)00452-4 ↗
27. Enhancement of Li+ ion conductivity in solid polymer electrolytes using surface tailored porous silica nanofillers
28. Corrosion inhibition of mild steel in 1M HCl solution by henna extract: a comparative study of the inhibition by henna and its constituents10.1016/j.corsci.2009.05.024 ↗
29. Use of novel permeable membrane and air cathodes in acetate microbial fuel cells10.1016/j.electacta.2009.11.086 ↗
30. An overview of electro-osmosis in fuel cell polymer electrolytes10.1016/j.polymer.2006.02.071 ↗
31. Pletcher · 2009
32. Methods to study the ionic conductivity of polymeric electrolytes using A.C. impedance spectroscopy10.1007/s100080000190 ↗
33. Charge-induced flow
34. Cathodic limitations in microbial fuel cells: an overview10.1016/j.jpowsour.2008.02.074 ↗
35. Processing of red ceramic using a fast-firing cycle10.1590/S0366-69132012000300018 ↗
36. Parameters characterization and optimization of activated carbón (A) cathodes for microbial fuel cell application10.1016/j.biortech.2014.03.091 ↗
37. Microbial fuel cell: critical factors regulating bio-catalyzed electrochemical process and recent advancements10.1016/j.rser.2014.07.109 ↗
38. PEE POWER® urinal II – urinal scale-up with microbial fuel cell scale-down for increased lighting
39. Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells10.1016/j.biortech.2013.08.163 ↗
40. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
41. Power generation using an activated carbon and metal mesh cathode in a microbial fuel cell10.1016/j.elecom.2009.09.024 ↗
42. Challenges and constraints of using oxygen cathodes in microbial fuel cells10.1021/es060332p ↗