Analysis and optimization of module layout for multi-stack vanadium flow battery module
Source abstract
Abstract
Abstract A multi-stack module consisting of a number of stacks connected in series and parallel serves as a basis for installation of MW-scale vanadium flow battery system in grid storage applications. Due to the existence of stack-to-stack variation in resistance, the module performance can be notably limited by an inappropriate module layout that magnifies the impact of stack resistance variation through series and parallel connections. To understand the layout effect on performance, an in-depth investigation is conducted for an eight-stack 250 kW module in this study. Based on experimental measurements, the correlation of module layout to performance is firstly revealed on both the 250 kW module and a laboratory mini-module. Subsequently, 35 different layouts are specified for the 250 kW module and their performance is fully evaluated by means of development of dynamic models for the module. Simulation results prove that the module charging capacity can be effectively improved by grouping stacks with similar resistances into the same branch and be further promoted by optimizing the flow rate for the stack with the largest resistance. The present study offers not only mechanistic insights into the importance of module layout but a cost-effective way to evaluate the module performance as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Vanadium redox flow batteries to reach greenhouse gas emissions targets in an off-grid configuration10.1016/j.apenergy.2015.02.005 ↗
2. Sharing economy as a new business model for energy storage systems10.1016/j.apenergy.2016.12.016 ↗
3. Materials, system designs and modelling approaches in techno-economic assessment of all-vanadium redox flow batteries - a review10.1016/j.jpowsour.2017.11.058 ↗
4. Critical safety features of the vanadium redox flow battery10.1016/j.jpowsour.2017.03.075 ↗
5. Performance of a vanadium redox flow battery with tubular cell design10.1016/j.jpowsour.2017.04.066 ↗
6. Application of carbon materials in redox flow batteries10.1016/j.jpowsour.2013.12.038 ↗
7. Development of the all-vanadium redox flow battery for energy storage: a review of technological, financial and policy aspects10.1002/er.1863 ↗
8. Modeling the effect of shunt current on the charge transfer efficiency of an all-vanadium redox flow battery10.1016/j.jpowsour.2018.04.042 ↗
9. Shunt currents in vanadium flow batteries: measurement, modelling and implications for efficiency10.1016/j.jpowsour.2015.03.057 ↗
10. Investigation of the effect of shunt current on battery efficiency and stack temperature in vanadium redox flow battery10.1016/j.jpowsour.2013.05.079 ↗
11. Shunt current loss of the vanadium redox flow battery10.1016/j.jpowsour.2011.08.033 ↗
12. A multi-stack simulation of shunt currents in vanadium redox flow batteries10.1016/j.jpowsour.2014.03.054 ↗
13. Model based examination on influence of stack series connection and pipe diameters on efficiency of vanadium redox flow batteries under consideration of shunt currents10.1016/j.jpowsour.2015.01.119 ↗
14. Design trade-offs among shunt current, pumping loss and compactness in the piping system of a multi-stack vanadium flow battery10.1016/j.jpowsour.2015.06.138 ↗
15. Redox flow batteries
16. Cell-balancing currents in parallel strings of a battery system10.1016/j.jpowsour.2016.04.125 ↗
17. State-of-charge inconsistency estimation of lithium-ion battery pack using mean-difference model and extended Kalman filter10.1016/j.jpowsour.2018.02.058 ↗
18. Calendar aging of a 250 kW/500 kWh Li-ion battery deployed for the grid storage application10.1016/j.jpowsour.2017.10.063 ↗
19. A review on battery thermal management in electric vehicle application10.1016/j.jpowsour.2017.09.046 ↗
20. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
21. Zero dimensional dynamic model of vanadium redox flow battery cell incorporating all modes of vanadium ions crossover10.1016/j.apenergy.2018.05.124 ↗
22. Self-assembled polyelectrolyte multilayer modified Nafion membrane with suppressed vanadium ion crossover for vanadium redox flow batteries10.1039/b718526j ↗