Template electrodeposition and characterization of nanostructured Pb as a negative electrode for lead-acid battery
Source abstract
Abstract
Abstract Despite Lead Acid Battery (LAB) is the oldest electrochemical energy storage system, diffusion in the emerging sectors of technological interest is inhibited by its drawbacks. The principal ones are low energy density and negative plate sulphating on high rate discharging. In this work, it is shown the possibility of overcoming such drawbacks by using nanostructured lead as a negative electrode. Lead nanowires (NWs) were fabricated by electrochemical deposition in template, which is an easy, cheap, and easily scalable process. Their morphology and crystal structure have been characterized by electron microscopy and X-ray diffraction, respectively. An electrochemical cell simulating LAB has been assembled with PbO2 as a counter electrode and an AGM separator, both from commercial battery. Cycling tests were conducted at 10C-rate, setting the cut-off voltage on discharging at 1.2 V. For comparison, also cycling tests at 1C-rate have been carried out, in otherwise identical conditions. At both C-rates, performances in terms of cycling efficiency and lifetime were found a lot better than those of current LABs. The high porosity formed under cycling at 10C-rate provides a reliable explanation of the results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced battery technologies research · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Environmental impact and economic assessment of secondary lead production: comparison of main spent lead-acid battery recycling processes in China10.1016/j.jclepro.2016.12.171 ↗
2. Spent lead-acid battery recycling in China – a review and sustainable analyses on mass flow of lead10.1016/j.wasman.2017.03.007 ↗
3. Lead industry life cycle studies: environmental impact and life cycle assessment of lead battery and architectural sheet production10.1007/s11367-015-1021-5 ↗
4. Recovery of lead from lead paste in spent lead acid battery by hydrometallurgical desulfurization and vacuum thermal reduction10.1016/j.wasman.2015.03.010 ↗
5. Metallic lead recovery from lead-acid battery paste by urea acetate dissolution and cementation on iron10.1016/j.hydromet.2008.09.001 ↗
6. Recovery of metals from a mixture of various spent batteries by a hydrometallurgical process10.1016/j.jenvman.2016.05.084 ↗
7. Single-wall carbon nanotube doping in lead-acid batteries: a new horizon10.1021/acsami.6b13377 ↗
8. Yoshio · 2009
9. Current research topics for lead–acid batteries
10. Flooded starting-lighting-ignition (SLI) and enhanced flooded batteries (EFBs): state-of-the-art
11. B. Zakeri, S. Syri, F. Wagner, Economics of Energy Storage in the German Electricity and Reserve Markets, 14th International Conference on the European Energy Market (EEM) Dresden, Germany 6-9 June 2017.10.1109/EEM.2017.7981914 ↗
12. Developments in soluble lead flow batteries and remaining challenges: an illustrated review10.1016/j.est.2017.10.020 ↗
13. N. Bashir, H.S. Sardar, M. Nasir, N.U. Hassan, H.A. Khan, Lifetime maximization of lead-acid batteries in small scale UPS and distributed generation systems, 12th IEEE PES PowerTech. Conference Manchester June 18-22 2017.10.1109/PTC.2017.7980993 ↗
14. Valve-regulated lead-acid batteries for telecommunications and UPS applications
15. An in-situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery10.1016/j.jpowsour.2013.10.143 ↗
16. Na2EDTA chelating agent as an electrolyte additive for high performance lead-acid batteries10.1016/j.electacta.2017.12.028 ↗
17. Multi-walled carbon nanotubes percolation network enhanced the performance of negative electrode for lead-acid battery10.1149/2.062301jes ↗
18. Lead-carbon electrode designed for renewable energy storage with superior performance in partial state of charge operation10.1016/j.jpowsour.2016.12.061 ↗
19. Smart city as a tool for sustainable mobility and transport decarbonisation10.1016/j.tranpol.2017.11.004 ↗
20. Lead–acid battery operation in micro-hybrid and electrified vehicles
21. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
22. Optimization of the cycle life performance of VRLA batteries, working under high rate, partial state of charge (HRPSOC) conditions10.1016/j.jpowsour.2006.03.025 ↗
23. The use of a Polymat material to reduce the effects of sulphation damage occurring in negative electrodes due to the partial state of charge capacity cycling of lead acid batteries10.1016/j.jpowsour.2011.10.087 ↗
24. Single-wall carbon nanotube doping in lead-acid batteries: a new horizon10.1021/acsami.6b13377 ↗
25. Towards sustainable road transport with the UltraBattery™
26. Advantages in energy efficiency of flooded lead-acid batteries when using partial state of charge operation10.1016/j.jpowsour.2017.11.050 ↗
27. Analysis approach of the formation current profiles impact on the lead acid battery manufacturing
28. Lead–acid battery fundamentals
29. Effects of electrolyte stratification on performances of AGM valve-regulated lead-acid batteries10.1016/j.electacta.2007.04.089 ↗
30. Temperature-dependent formation of vertical concentration gradients in lead-acid batteries under PSoC operation – Part 1: acid stratification10.1016/j.electacta.2012.12.013 ↗
31. Current-collectors for lead–acid batteries
32. Lead-acid batteries for partial-state-of-charge applications10.1016/j.jpowsour.2008.12.081 ↗
33. Nanostructures fabrication by template deposition into anodic alumina membranes
34. A new route to grow oxide nanostructures based on metal displacement deposition: lanthanides oxy/hydroxides growth10.1016/j.electacta.2012.04.146 ↗
35. Amorphous silicon nanotubes via galvanic displacement deposition10.1016/j.elecom.2013.05.041 ↗
36. Template electrochemical growth and properties of Mo oxide nanostructures10.1021/jp505819j ↗
37. Characterization of SnCo nanowires grown into alumina template10.1149/1.3059545 ↗
38. Electrochemical deposition of Ag2Se nanostructures10.1016/j.materresbull.2016.09.033 ↗
39. A. Moncada, R. Inguanta, S. Piazza, C. Sunseri, Nano-structured PbO2 electrode for lead-acid battery, pp. 161-164 Proceedings of 9th International Conference on Lead-Acid Batteries LABAT’2014 Albena, Bulgaria June 10-13, 2014.
40. High-performance of PbO2 nanowire electrodes for lead-acid battery10.1016/j.jpowsour.2014.01.050 ↗
41. Performance of nanostructured electrode in lead acid battery
42. Recent improvements in PbO2 nanowire electrodes for lead-acid battery10.1016/j.jpowsour.2014.10.189 ↗
43. Growth and electrochemical performance of lead and lead oxide nanowire arrays as electrodes for lead-acid batteries
44. Nanostructured Pb electrode for innovative lead-acid battery
45. Lead nanowires for microaccumulators obtained through indirect electrochemical template deposition10.1149/1.3246944 ↗
46. Growth and characterization of ordered PbO2 nanowire arrays10.1149/1.2988728 ↗
47. Electrodeposition of lead and lead alloys
48. An in situ generated carbon as integrated conductive additive for hierarchical negative plate of led-acid battery10.1016/j.jpowsour.2013.10.143 ↗
49. Lead acid battery performance and cycle life increased through addition of discrete carbon nanotubes to both electrodes10.1016/j.jpowsour.2014.12.117 ↗
50. Mechanism of action of electrochemically active carbons on the processes that take place at the negative plates of lead-acid batteries10.1016/j.jpowsour.2008.11.056 ↗
51. Understanding function and performance of carbon additives in lead-acid batteries10.1149/2.1031713jes ↗
52. Evaluating the lead affinity of graphite additives in lead-acid batteries by electrochemical deposition10.1016/j.electacta.2017.03.034 ↗
53. Preparation of four basic lead sulfate nano-rods additives and effect on the electrochemical performance of lead-acid battery10.1016/j.est.2017.07.009 ↗
54. Influence of carbons on the structure of the negative active material of lead-acid batteries and on battery performance10.1016/j.jpowsour.2011.02.014 ↗
55. High-performance porous lead/graphite composite electrode for bipolar lead-acid batteries10.1002/er.3729 ↗
56. Effect of carbon foams as negative current collectors on partial-state-of-charge performance of lead acid batteries10.1016/j.elecom.2008.05.009 ↗
57. Electroplated reticulated vitreous carbon current collectors for lead–acid batteries: opportunities and challenges10.1016/S0378-7753(02)00553-0 ↗
58. Preparation and performance of Al/Pb composite material for lead-acid battery negative grid
59. Novel polymer-graphite composite grid as a negative current collector for lead-acid batteries10.1016/j.jpowsour.2016.09.097 ↗
60. Electrodeposition of lead
61. Fabrication and characterization of metal and metal oxide nanostructures grown by metal displacement deposition into anodic alumina membranes
62. Bockris · 1998 · 1338
63. Pavlov · 2017
64. Water droplet spreading and wicking on nanostructured surfaces10.1021/acs.langmuir.7b01223 ↗
65. Water wicking and droplet spreading on randomly structured thin nanoporous layers10.1021/acs.langmuir.7b03687 ↗
66. Saturation concentration of dissolved O2 in highly acidic aqueous solutions of H2SO410.1021/ie049539m ↗
67. The aqueous system Pb2+/Pb
68. Hydrogen evolution and oxygen reduction on lead
69. Salkind · 2002
70. Chen · Electrochim. Acta · 2013 · 88 · 7910.1016/j.electacta.2012.10.009 ↗
71. Electrocrystallization Nucleation and growth phenomena10.1016/S0013-4686(00)00353-4 ↗
72. Electrochemical synthesis of silver nanoparticles10.1021/jp001761r ↗