journal article·2017-11Open access

Influence of strain on local structure and lithium ionic conduction in garnet-type solid electrolyte

Hirotoshi Yamada, Tomoko Ito, Rajendra Hongahally Basappa, Raman Bekarevich, Kazutaka Mitsuishi

Abstract

Abstract All-solid-state batteries (ASSBs) have various problems associated with their usage that are normally not encountered in conventional lithium-ion batteries. Stress on interfaces between solid electrolytes and active materials is one of the key issues because the active materials change their volume during charging/discharging. In this work, first, we reveal that garnet-type solid electrolytes, Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZT), prepared by the spark plasma sintering (SPS) technique, exhibit a residual tensile stress of more than 100 MPa in the direction of the SPS pressure. Then, the influence of the strain on ionic conduction is investigated in detail. It is demonstrated that the strain causes no change in the bulk resistance, while the grain boundary resistance increases in both the pre-exponential factor and the activation energy. The results suggest the importance of the strength of grain boundaries (including interfaces) for the practical application of ASSBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Progress and prospective of solid-state lithium batteries10.1016/j.actamat.2012.10.034 ↗
2. Novel fast lithium ion conduction in garnet-type Li5La3M2O12 (M = Nb, Ta)10.1111/j.1151-2916.2003.tb03318.x ↗
3. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
4. Lattice parameter and sintering temperature dependence of bulk and grain-boundary conduction of garnet-like solid Li-Electrolytes10.1149/1.2800764 ↗
5. Synthesis of garnet-type Li7−xLa3Zr2O12−1/2x and its stability in aqueous solutions10.1016/j.ssi.2010.12.010 ↗
6. Ta-doped Li7La3Zr2O12 for water-stable lithium electrode of lithium-air batteries10.1149/2.013405jes ↗
7. Effects of Li source on microstructure and ionic conductivity of Al-contained Li6.75La3Zr1.75Ta0.25O12 ceramics10.1016/j.jeurceramsoc.2014.09.007 ↗
8. Spark plasma sintered/synthesized dense and nanostructured materials for solid-state Li-ion batteries: overview and perspective10.1016/j.jpowsour.2013.09.010 ↗
9. Garnet related lithium ion conductor processed by spark plasma sintering for all solid state batteries10.1016/j.jpowsour.2013.10.089 ↗
10. Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes10.1016/j.jpowsour.2014.03.148 ↗
11. Sintering mechanisms of high-performance garnet-type solid electrolyte densified by spark plasma sintering10.1016/j.electacta.2016.11.020 ↗
12. Contact between garnet-type solid electrolyte and lithium metal anode: influence on charge transfer resistance and short circuit prevention10.1149/2.0841704jes ↗
13. Grain boundary modification to suppress lithium penetration through garnet-type solid electrolyte10.1016/j.jpowsour.2017.07.088 ↗
14. Field assisted sintering of fine-grained Li7-3xLa3Zr2AlxO12 solid electrolyte and the influence of the microstructure on the electrochemical performance10.1016/j.jpowsour.2016.01.086 ↗
15. Ionic conductivity in uniaxial micro strain/stress fields of yttria-stabilized zirconia10.1143/JJAP.50.055803 ↗
16. Mechanical stress effect on oxygen ion mobility in 8mol% yttria-stabilized zirconia electrolyte10.1016/j.jeurceramsoc.2009.01.014 ↗
17. Depth-resolved X-ray absorption spectroscopic study on nanoscale observation of the electrode–solid electrolyte interface for all solid state lithium ion batteries10.1039/c0jm04366d ↗
18. X-ray stress measurement of alumina/zirconia composites
19. An approach to residual stress in the ground layer of ceramics from material removal by ground10.2472/jsms.41.624 ↗
20. Three-dimensional visualization in powder diffraction10.4028/www.scientific.net/SSP.130.15 ↗
21. Phenomenological model of anisotropic peak broadening in powder diffraction10.1107/S0021889898006001 ↗
22. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet10.1007/s10853-012-6687-5 ↗
23. Elastic properties of the solid electrolyte Li7La3Zr2O12 (LLZO)10.1021/acs.chemmater.5b03854 ↗
24. Residual stress of ruthenium powder samples compacted by spark-plasma-sintering (SPS) determined by X-ray diffraction10.1016/j.ijrmhm.2008.04.002 ↗
25. Structure–microstructure–property relationships in lead-free BCTZ piezoceramics processed by conventional sintering and spark plasma sintering10.1016/j.jeurceramsoc.2015.06.030 ↗
26. Numerical simulation for residual stresses of the spark plasma sintered Ti-TiB composites10.1166/jctn.2012.2167 ↗
27. From order to disorder: the structure of lithium-conducting garnets Li7−xLa3TaxZr2−xO12 (x = 0–2)10.1016/j.ssi.2011.10.023 ↗
28. The grain boundary impedance of random microstructures: numerical simulations and implications for the analysis of experimental data10.1016/S0167-2738(02)00274-6 ↗
29. Nonlinear electrical grain boundary properties in proton conducting Y–BaZrO3 supporting the space charge depletion model10.1039/C1CP22487E ↗
30. Giant barrier layer capacitance effects in CaCu3Ti4O12 ceramics10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗
31. Reduced grain boundary resistance by surface modification10.1021/jp510077z ↗