journal article·2017-10

Determining the maximum charging currents of lithium-ion cells for small charge quantities

F. Grimsmann, T. Gerbert, F. Brauchle, A. Gruhle, J. Parisi, M. Knipper

Publisher page

Abstract

Abstract In order to optimize the operating parameters of battery management systems for electric and hybrid vehicles, great interest has been shown in achieving the maximum permissible charging currents during recuperation, without causing a cell damage due to lithium plating, in relation to the temperature, charge quantity and state of charge. One method for determining these recuperation currents is measuring the cell thickness, where excessively high charging currents can be detected by an irreversible increase in thickness. It is not possible to measure particularly small charge quantities by employing mechanic dial indicators, which have a limited resolution of 1 μm. This is why we developed a measuring setup that has a resolution limit of less than 10 nm using a high-resolution contactless inductance sensor. Our results show that the permissible charging current I can be approximated in relation to the charge quantity x by a correlating function I = a / ( x ) which is compliant with the Arrhenius law. Small charge quantities therefore have an optimization potential for energy recovery during recuperation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. In situ observation of strains during lithiation of a graphite electrode10.1149/1.3377130 ↗
2. Intercalation compounds from lih and graphite: relative stability of metastable stages and thermodynamic stability of dilute stage Id10.1021/acs.chemmater.5b00235 ↗
3. Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction10.1016/j.jpowsour.2014.07.168 ↗
4. Direct evidence on anomalous expansion of graphite-negative electrodes on first charge by dilatometry10.1016/S0378-7753(01)00590-0 ↗
5. Lithium intercalation into graphitic carbons revisited: experimental evidence for twisted bilayer behavior10.1149/2.031305jes ↗
6. Real-time observations of lithium battery reactions––operando neutron diffraction analysis during practical operation10.1038/srep28843 ↗
7. Structural changes in a commercial lithium-ion battery during electrochemical cycling: an in situ neutron diffraction study10.1016/j.jpowsour.2010.06.114 ↗
8. A new method for detecting lithium plating by measuring the cell thickness10.1016/j.jpowsour.2014.03.142 ↗
9. Lithium plating behavior in lithium-ion cells10.1149/1.3393860 ↗
10. In situ detection of lithium metal plating on graphite in experimental cells10.1016/j.jpowsour.2015.01.046 ↗
11. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
12. Effects of rest time after Li plating on safety behavior - arc tests with commercial high-energy 18650 Li-ion cells10.1016/j.electacta.2017.02.036 ↗
13. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
14. Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling10.1016/j.jpowsour.2013.06.130 ↗
15. The effect of the charging protocol on the cycle life of a Li-ion battery10.1016/j.jpowsour.2006.06.040 ↗
16. Understanding the dilation and dilation relaxation behavior of graphite-based lithium-ion cells10.1016/j.jpowsour.2016.03.078 ↗
17. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
18. Hysteresis and current dependence of the thickness change of lithium-ion cells with graphite anode10.1016/j.est.2017.04.006 ↗