Impact of morphological changes of LiNi1/3Mn1/3Co1/3O2 on lithium-ion cathode performances
Source abstract
Abstract
Abstract Major advances in Li-ion battery technology rely on the nanostructuration of active materials to overcome the severe kinetics limitations of new – cheaper and safer – chemistries. However, opening porosities results in the decrease of volumetric performances, closing the door to significant applications such as portable electronics, electromobility, and grid storage. In this study, we analyze the link between morphologies and performances of model LiNi 1/3 Mn 1/3 Co 1/3 O 2 materials. By quantifying exhaustively their microstructures using nitrogen adsorption, mercury intrusion porosimetry, and helium pycnometry, we can discuss how porosities and surface areas are linked to the electrochemical behavior. There is no geometrical parameters that can predict the performances of all our materials. The shape of agglomeration dictates the electrochemical behavior. A huge drop in volumetric performances is measured when microstructure is considered. We show that gravimetric and volumetric power performances are contrary to each other. Highly dense materials exhibit, by far, the best power performances in terms of volumetric figures, so that opening porosities might not be the best strategy, even in non-nanosized materials, for Li-ion battery technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Department of Energy, 2015 Annual Merit Review, (n.d.). http://www.annualmeritreview.energy.gov/. (accessed July 28, 2016).
2. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
3. Structure and electrochemistry of LixMnyNi1−yO210.1016/0167-2738(92)90164-K ↗
4. Structure and electrochemistry of Li [NixCo1 − 2xMnx]O2(0≤x≤1/2)10.1149/1.1505633 ↗
5. Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries10.1016/S0378-7753(03)00173-3 ↗
6. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
7. Comparative study of the capacity and rate capability of LiNiyMnyCo1–2y O2 (y = 0.5, 0.45, 0.4, 0.33)10.1149/1.3562212 ↗
8. Towards understanding the rate capability of layered transition metal oxides LiNiyMnyCo1−2yO210.1016/j.jpowsour.2014.05.142 ↗
9. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
10. Synthesis and electrochemical properties of nanocrystalline Li[NixLi(1−2x)/3Mn(2−x)/3]O2 prepared by a simple combustion method10.1039/B311888F ↗
11. Low-temperature synthesis of LixMn0.67Ni0.33O2 (0.2 < x < 0.33) nanowires with a hexagonal layered structure10.1002/adma.200500638 ↗
12. Macroporous Li(Ni1/3Co1/3Mn1/3)O2: a high-power and high-energy cathode for rechargeable lithium batteries10.1002/adma.200600958 ↗
13. Li0.93[Li0.21Co0.28Mn0.51]O2 nanoparticles for lithium battery cathode material made by cationic exchange from K-birnessite10.1016/j.elecom.2006.12.020 ↗
14. Template-free synthesis of Li[Ni0.25Li0.15Mn0.6]O2nanowires for high performance lithium battery cathode10.1039/B815378G ↗
15. Crystal habit-tuned nanoplate material of Li[Li1/3–2x/3NixMn2/3–x/3]O2 for high-rate performance lithium-ion batteries10.1002/adma.201001578 ↗
16. Stepwise co-precipitation to synthesize LiNi1/3Co1/3Mn1/3O2 one-dimensional hierarchical structure for lithium ion batteries10.1016/j.jpowsour.2014.08.052 ↗
17. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
18. Synthetic optimization of Li[Ni1/3Co1/3Mn1/3]O2 via co-precipitation10.1016/j.electacta.2004.07.038 ↗
19. Effect of synthesis condition on the structural and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 prepared by carbonate co-precipitation method10.1016/j.jpowsour.2004.10.016 ↗
20. Design, synthesis, and performances of double-shelled LiNi0.5Co0.2Mn0.3O2 as cathode for long-life and safe Li-ion battery10.1016/j.jpowsour.2014.04.107 ↗
21. Optimized synthetic conditions of LiNi0.5Co0.2Mn0.3O2 cathode materials for high rate lithium batteries via co-precipitation method10.1149/2.004302jes ↗
22. High-rate and cycling-stable nickel-rich cathode materials with enhanced Li+ diffusion pathway10.1021/acsami.5b09641 ↗
23. Superior long-term energy retention and volumetric energy density for Li-rich cathode materials10.1021/nl502980k ↗
24. Hierarchical Li1.2Ni0.2Mn0.6O2 nanoplates with exposed {010} planes as high-performance cathode material for lithium-ion batteries10.1002/adma.201402541 ↗
25. Micrometer-sized, nanoporous, high-volumetric-capacity LiMn0.85Fe0.15PO4 cathode material for rechargeable lithium-ion batteries10.1002/adma.201102497 ↗
26. Synthesis, characterization, and electrochemical behavior of improved Li[NixCo1-2xMnx]O2 (0.1 ≤ x ≤ 0.5)10.1149/1.1622956 ↗
27. Li[Ni1/3Mn1/3Co1/3]O2-based electrodes for PHEV applications: an optimization10.1149/1.2992488 ↗
28. Synthesis of spherical Li[Ni(1/3−z)Co(1/3−z)Mn(1/3−z)Mgz]O2 as positive electrode material for lithium-ion battery10.1016/j.electacta.2005.07.026 ↗
29. Significant improved electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 cathode on volumetric energy density and cycling stability at high rate10.1016/j.elecom.2006.11.039 ↗
30. Synthesis of spherical and dense particles of the pure hydroxide phase Ni1/3Mn1/3Co1/3(OH)210.1149/1.3079366 ↗
31. Synthesis by a soft chemistry route and characterization of LiNixCo1-xO2 (0 ≤ x ≤ 1) cathode materials10.1016/S0167-2738(96)00418-3 ↗
32. LiNi0.74Co(0.26-x)Mg(x)O2 cathode material for a Li-ion cell10.1021/cm000153l ↗
33. Optimization of the composition of the Li1−zNi1 + zO2 electrode materials: structural, magnetic, and electrochemical studies10.1149/1.1836614 ↗
34. Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure10.1016/0167-2738(90)90049-W ↗
35. Electrochemical and in situ x-ray diffraction studies of lithium intercalation in Li x CoO210.1149/1.2221184 ↗
36. Effects of cation mixing on the electrochemical lithium intercalation reaction into porous Li1 − δNi1 − yCoyO2 electrodes10.1016/0167-2738(96)00269-X ↗
37. Effects of synthesis conditions on the structural and electrochemical properties of layered Li[Ni1/3Co1/3Mn1/3]O2 cathode material via the hydroxide co-precipitation method LIB SCITECH10.1016/j.jpowsour.2006.03.090 ↗
38. ASTM E 799–03 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis, (n.d.).
39. Structural and electrochemical properties of LiNi1/3Co1/3Mn1/3O2: calcination temperature dependence10.1016/j.jpowsour.2007.06.017 ↗
40. Determination of the chemical diffusion coefficient of lithium ions in spherical Li[Ni0.5Mn0.3Co0.2]O210.1016/j.electacta.2012.01.061 ↗
41. Crystal growth of Li[Ni 1/3Co 1/3Mn 1/3]O2 as a cathode material for high-performance lithium ion batteries10.1021/cg200565n ↗
42. LiNi1/3Co1/3Mn1/3O2 with a novel one-dimensional porous structure: a high-power cathode material for rechargeable Li-ion batteries10.1016/j.scriptamat.2010.09.018 ↗
43. Recommendations for the characterization of porous solids (Technical Report)10.1351/pac199466081739 ↗