journal article·2017-02

Improved performance of a symmetrical solid oxide fuel cell by swapping the roles of doped ceria and La0.6Sr1.4MnO4+δ in the electrode

Jian Shen, Guangming Yang, Zhenbao Zhang, Moses O. Tadé, Wei Zhou, Zongping Shao

Publisher page

Abstract

Symmetrical solid oxide fuel cells (SSOFCs) show many advantageous features as compared with conventional cells with nickel cermet anode and oxide cathode. A K2NiF4-type layer-structured oxide, La0.6Sr1.4MnO4+delta (LSMO4), was reported to be a potential electrode for SSOFCs, and the modification of LSMO4 surface with samaria-doped ceria (SDC) and NiO was found to be the key in improving performance. In this study, the swapping of roles for SDC and LSMO4 in electrodes of SSOFCs is exploited, i.e., SDC is applied as the scaffold and LSMO4 as the surface modifier. Different from pristine LSMO4, the impregnated LSMO4 demonstrates amorphous phase. Compared to NiO-SDC impregnated LSMO4, NiO-LSMO4/SDC electrodes show a superior cathodic performance with an area specific resistance of 0.1 Omega cm(2) at 700 degrees C. Under optimized conditions, maximum power densities of 714 and 108 mW cm(-2) at 800 degrees C are achieved for an electrolyte-supported symmetrical single cell with a NiO-LSMO4/SDC electrode operating with hydrogen and methane, respectively. The difference in performance of the electrodes built by swapping the role and function of the SDC and LSMO4 phases is discussed, and a possible mechanism responsible for such different behaviours in cell power outputs via the impregnation of LSMO4 (NiO)+SDC electrodes is proposed. (C) 2016 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Progress and prospects in symmetrical solid oxide fuel cells with two identical electrodes10.1002/aenm.201500188 ↗
2. Symmetric and reversible solid oxide fuel cells10.1039/c1ra00284h ↗
3. A novel electrode material for symmetrical SOFCs10.1002/adma.201001044 ↗
4. A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes10.1039/b600532b ↗
5. Nano La0.6Ca0.4Fe0.8Ni0.2O3-δ decorated porous doped ceria as a novel cobalt-free electrode for “symmetrical” solid oxide fuel cells10.1039/C4TA03485F ↗
6. A robust symmetrical electrode with layered perovskite structure for direct hydrocarbon solid oxide fuel cells: PrBa0.8Ca0.2Mn2O5+δ10.1039/C5TA08878J ↗
7. Advanced symmetric solid oxide fuel cell with an infiltrated K2NiF4-type La2NiO4 electrode10.1021/ef401473w ↗
8. Impregnated LaCo0.3Fe0.67Pd0.03O3-δ as a promising electrocatalyst for “symmetrical” intermediate- temperature solid oxide fuel cells10.1016/j.jpowsour.2015.12.021 ↗
9. In situ growth of nanoparticles in layered perovskite La0.8Sr1.2Fe0.9Co0.1O4-δ as an active and stable electrode for symmetrical solid oxide fuel cells10.1021/acs.chemmater.6b00071 ↗
10. On the simultaneous use of La0.75Sr0.25Cr0.5Mn0.5O3-δ as both anode and cathode material with improved microstructure in solid oxide fuel cells10.1016/j.electacta.2006.05.006 ↗
11. A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods10.1016/j.jpowsour.2010.07.055 ↗
12. Structural and electrochemical characterisation of Pr0.7Ca0.3Cr1-yMnyO3-δ as symmetrical solid oxide fuel cell electrodes10.1016/j.jpowsour.2008.11.050 ↗
13. Simple solid oxide fuel cells10.1016/j.jallcom.2009.09.111 ↗
14. La0.75Sr0.25-xCexCr0.5Mn0.5O3-δ electrode material for symmetric solid oxide fuel cells with H2S-containing fuel10.1016/j.jallcom.2013.05.219 ↗
15. Perovskite Sr2Fe1.5Mo0.5O6-δ as electrode materials for symmetrical solid oxide electrolysis cells
16. Promotion of oxygen reduction by exsolved silver nanoparticles on a perovskite scaffold for low-temperature solid oxide fuel cells10.1021/acs.nanolett.5b04160 ↗
17. A highly active perovskite electrode for the oxygen reduction reaction below 600 °C10.1002/anie.201307305 ↗
18. Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells10.1038/nmat4166 ↗
19. Strongly correlated perovskite fuel cells10.1038/nature17653 ↗
20. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
21. A novel composite cathode for low-temperature SOFCs based on oxide proton conductors10.1002/adma.200702762 ↗
22. Kinetic studies on the reaction at the La0.6Ca0.4MnO3/YSZ interface, as an SOFC air electrode10.1016/0167-2738(89)90306-8 ↗
23. Reaction model of dense Sm0.5Sr0.5CoO3 as SOFC cathode10.1016/S0167-2738(00)00642-1 ↗
24. Progress in understanding SOFC electrodes10.1016/S0167-2738(02)00269-2 ↗
25. LSM-SDC electrodes fabricated with an ion-impregnating process for SOFCs with doped ceria electrolytes10.1016/j.ssi.2006.01.043 ↗
26. Composite (La, Sr) MnO3-YSZ cathode for SOFC10.1016/j.ssi.2005.12.016 ↗
27. LSCF-SDC core-shell high-performance durable composite cathode10.1016/j.jpowsour.2009.06.079 ↗
28. Engineering composite oxide SOFC anodes for efficient oxidation of methane10.1149/1.2817809 ↗
29. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
30. Optimisation of composite cathodes for intermediate temperature SOFC applications10.1016/S0167-2738(99)00108-3 ↗
31. The performance of La0.6Sr1.4MnO4 layered perovskite electrode material for intermediate temperature symmetrical solid oxide fuel cells10.1016/j.jpowsour.2014.06.163 ↗
32. La0.6Sr1.4MnO4 layered perovskite anode material for intermediate temperature solid oxide fuel cells10.1016/j.elecom.2011.11.008 ↗
33. (La, Sr)MnO3-(Ce, Gd)O2-x composite cathodes for solid oxide fuel cells10.1016/S0167-2738(01)00871-2 ↗
34. Tuning layer-structured La0.6Sr1.4MnO4+δ into a promising electrode for intermediate-temperature symmetrical solid oxide fuel cells through surface modification10.1039/C6TA02986H ↗
35. Sm0.5Sr0.5CoO3-δ-infiltrated cathodes for solid oxide fuel cells with improved oxygen reduction activity and stability10.1016/j.jpowsour.2012.05.068 ↗
36. 3D core-shell architecture from infiltration and beneficial reactive sintering as highly efficient and thermally stable oxygen reduction electrode10.1039/C3TA13253F ↗
37. Novel approach for developing dual-phase ceramic membranes for oxygen separation through beneficial phase reaction10.1021/acsami.5b05812 ↗
38. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
39. Oxygen reduction reactions in the SOFC cathode of Ag/CeO210.1016/j.ssi.2006.02.029 ↗
40. Parametric study of solid oxide fuel cell performance10.1016/j.enconman.2006.11.016 ↗
41. Recent anode advances in solid oxide fuel cells10.1016/j.jpowsour.2007.06.086 ↗
42. Gel-cast NiO-SDC composites as anodes for solid oxide fuel cells10.1016/j.jpowsour.2004.01.017 ↗