Effect of grain refinement and electrochemical nitridation on corrosion resistance of the 316L stainless steel for bipolar plates in PEMFCs environment
Source abstract
Abstract
Abstract The stain-induced nanocrystalline α'-martensite was obtained by cryogenic cold rolling at liquid-nitrogen temperature for 316L stainless steel. The electrochemical results showed nanocrystalline 316L stainless steel deteriorated its corrosion resistance in a typical proton exchange membrane fuel cell environment compared with coarse grained one. However, comparing with electrochemically nitrided coarse grained stainless steel, electrochemically nitrided nanocrystalline stainless steel improved significantly corrosion resistance in the same environment, which was supported further by Mott–Shottky analysis. X-ray photoelectron spectroscopy analysis revealed that the nanocrystalline promoted the enrichment of nitrogen and chromium and inhibited form of NH 3 on the surface, which could significantly improve the corrosion resistance of the 316L stainless steel. The present study showed that the electrochemically nitrided 316L stainless steel was more suitable for the bipolar plates in proton exchange membrane fuel cell environment than the untreated one, especially for nanocrystalline stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Detecting proton exchange membrane fuel cell hydrogen leak using electrochemical impedance spectroscopy method10.1016/j.jpowsour.2013.07.018 ↗
2. Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells10.1016/j.electacta.2007.12.078 ↗
3. Growth of Cr-Nitrides on commercial Ni–Cr and Fe–Cr base alloys to protect PEMFC bipolar plates10.1016/j.ijhydene.2006.08.044 ↗
4. Molybdenum nitride modified AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cell10.1016/j.ijhydene.2011.12.147 ↗
5. Effects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions10.1016/j.electacta.2009.02.024 ↗
6. Nitrogen plasma-implanted titanium as bipolar plates in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2010.04.053 ↗
7. High nitrogen stainless steel as bipolar plates for proton exchange membrane fuel cells10.1016/j.jpowsour.2008.07.041 ↗
8. Application of Ni-free high nitrogen stainless steel for bipolar plates of proton exchange membrane fuel cell10.1016/j.electacta.2008.08.056 ↗
9. High voltage retainable Ni-saving high nitrogen stainless steel bipolar plates for proton exchange membrane fuel cells: Phenomena and mechanism10.1016/j.jpowsour.2011.11.033 ↗
10. Modifying a stainless steel via electrochemical nitridation10.1039/c0jm03585h ↗
11. Electrochemical nitridation of a stainless steel for PEMFC bipolar plates10.1016/j.ijhydene.2011.07.045 ↗
12. Comparison of corrosion properties of passive films formed on phase reversion induced nano/ultrafine-grained 321 stainless steel10.1016/j.apsusc.2013.04.108 ↗
13. Electrochemically induced annealing of stainless-steel surfaces10.1038/35038040 ↗
14. Nitriding iron at lower temperatures10.1126/science.1080216 ↗
15. Electrochemical behaviour of an AISI 304L stainless steel implanted with nitrogen10.1016/j.electacta.2008.03.064 ↗
16. Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions10.1016/j.corsci.2005.08.011 ↗
17. Metal bipolar plates for PEM fuel cell—A review10.1016/j.jpowsour.2006.09.088 ↗
18. Effects of light pre-deformation on pitting corrosion resistance of copper-bearing ferrite antibacterial stainless steel10.1016/j.jmatprotec.2007.11.201 ↗
19. Electrochemical investigation of passive film in pre-deformation AISI 304 stainless steels10.1016/j.apsusc.2012.08.058 ↗
20. Laser Raman microscopic studies of passive films formed on type 316LN stainless steels during pitting in chloride solution10.1016/j.corsci.2010.02.028 ↗
21. Impedance spectroscopy at semiconductor electrodes: Review and recent developments10.1016/0013-4686(95)00427-0 ↗
22. Belo · 1991 · 219
23. Effects of nitrogen on the passivity of Fe–20Cr alloy10.1016/j.corsci.2008.10.017 ↗
24. Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels10.1016/j.corsci.2006.05.041 ↗
25. High corrosion resistance of austenitic stainless steel alloyed with nitrogen in an acid solution10.1016/j.corsci.2011.02.039 ↗
26. The point defect model for the passive state10.1149/1.2069096 ↗