journal article·2022-11

Numerical evaluation of the effect of air inlet and outlet cross-sections of a lithium-ion battery pack in an air-cooled thermal management system

Qibing Yu, Awatef Abidi, Mustafa Z. Mahmoud, Emad Hasani Malekshah, Hikmet Ş. Aybar

Publisher page

Abstract

In this paper, airflow around 16 cylindrical lithium-ion cells placed in a square battery pack (BTP) is numerically examined. Laminar airflow enters the BTP from the top of the battery cells (BTC) and exits from the bottom of the BTP. In this three-dimensional analysis, the effect of the air inlet and outlet cross-sections on the temperature of the battery (T-BT) cells and the maximum and average T-BT pack is evaluated. The finite element method is used to solve the equations of battery and airflow. The results show that the upper part of the BTCs is at a lower temperature than the lower parts. The BTCs located in the middle of the BTP have a higher temperature than the ones located around the BTP. An increment in the air inlet cross-section reduces the average and the maximum T-BT pack. Enhancing the air outlet cross-section has little effect on the T-BT cells. The T-BT cells is enhanced until 1500 s, after which it is reduced because the airflow is diminished due to that the battery charging stops.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Electric Vehicles and Infrastructure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Metal–organic framework-based solid-state electrolytes for all solid-state lithium metal batteries: a review10.1039/D2CE00663D ↗
2. Electric vehicle routing problem: a systematic review and a new comprehensive model with nonlinear energy recharging and consumption10.1016/j.rser.2021.111567 ↗
3. Modelling of battery thermal management: a new concept of cooling using fuel10.1016/j.fuel.2021.122403 ↗
4. Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications10.1016/S0378-7753(02)00196-9 ↗
5. Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles10.1016/j.jpowsour.2017.07.067 ↗
6. State of charge estimation of supercapacitors based on multi-innovation unscented Kalman filter under a wide temperature range10.1002/er.8334 ↗
7. Hierarchical multi-objective optimal planning model of active distribution network considering distributed generation and demand-side response
8. Data-driven dynamic harmonic model for modern household appliances10.1016/j.apenergy.2022.118759 ↗
9. Bernardi · 1984
10. A general energy balance for battery systems10.1149/1.2113792 ↗
11. Rapid sintering method for highly conductive Li7La3Zr2O12 ceramic electrolyte10.1016/j.ceramint.2020.01.106 ↗
12. Engineering hierarchical porous S-doped Defective nickel Cobaltite/carbon hybrids to boost efficient asymmetric electrochemical capacitor
13. Topology optimization design and numerical analysis on cold plates for lithium-ion battery thermal management10.1016/j.ijheatmasstransfer.2021.122087 ↗
14. Wu · 2021
15. Fast grid frequency and voltage control of battery energy storage system based on the amplitude-phase-locked-loop10.1109/TSG.2021.3133580 ↗
16. Group performance of energy piles under cyclic and variable thermal loading10.1061/(ASCE)GT.1943-5606.0002840 ↗
17. Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids10.1016/j.solmat.2022.111633 ↗
18. Thermophysical properties of water, water and ethylene glycol mixture-based nanodiamond + Fe3O4 hybrid nanofluids: an experimental assessment and application of data-driven approaches10.1016/j.molliq.2021.117944 ↗
19. Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: experimental investigations and model -prediction using modern machine learning techniques10.1016/j.powtec.2022.117190 ↗
20. Machinability of ultrasonic vibration assisted micro-grinding in biological bone using nanolubricant
21. Phase-change materials to improve solar panel's performance10.1016/j.enbuild.2013.02.059 ↗
22. Experimental study on melting/solidification characteristics of a paraffin as PCM10.1016/j.enconman.2006.05.014 ↗
23. Enhancement of heat transfer in paraffin wax PCM using nano graphene composite for industrial helmets10.1016/j.est.2019.100982 ↗
24. Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review10.1016/j.enconman.2017.08.016 ↗
25. "Loading PCM into buildings envelope to decrease heat gain-performing transient thermal analysis on nanofluid filled solar system," (in English), frontiers in energy research
26. A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations10.1016/j.jpowsour.2018.08.094 ↗
27. Design of battery thermal management system based on phase change material and heat pipe10.1016/j.applthermaleng.2021.116665 ↗
28. Exergy analysis for the evaluation of a thermal storage system employing PCMs with different melting temperatures10.1016/1359-4311(96)00003-8 ↗
29. Investigation of passive method in thermal management of lithium-ion batteries at different discharge rates by changing the number of cavities containing phase change materials10.1016/j.est.2022.104758 ↗
30. Optimization of a phase change material based internal cooling system for cylindrical Li-ion battery pack and a hybrid cooling design10.1016/j.energy.2017.06.168 ↗
31. Cooling of non-sloped, positively sloped, and negatively sloped arrangements of Li-ion batteries with a phase change material connected to a solar system10.1016/j.est.2022.104808 ↗
32. A review on thermal issues in Li-ion battery and recent advancements in battery thermal management system10.1016/j.matpr.2020.03.317 ↗
33. Air and PCM cooling for battery thermal management considering battery cycle life10.1016/j.applthermaleng.2020.115154 ↗
34. Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam10.1016/j.jpowsour.2015.07.056 ↗
35. Development of cooling strategy for an air cooled lithium-ion battery pack10.1016/j.jpowsour.2014.08.107 ↗
36. Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles10.1016/j.jpowsour.2014.07.120 ↗
37. Effective interlaminar reinforcing and delamination monitoring of carbon fibrous composites using a novel nano-carbon woven grid10.1016/j.compscitech.2021.108959 ↗
38. A surrogate thermal modeling and parametric optimization of battery pack with air cooling for EVs10.1016/j.applthermaleng.2018.10.060 ↗
39. Thermoelectric cooling device integrated with PCM heat storage for MS patients10.1016/j.egypro.2014.12.014 ↗
40. A comparative assessment of force, temperature and wheel wear in sustainable grinding aerospace alloy using bio-lubricant
41. Tribology of enhanced turning using biolubricants: a comparative assessment10.1016/j.triboint.2022.107766 ↗
42. A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles10.1016/j.jpowsour.2021.230001 ↗
43. Cen · 2020 · vol. 57 · 141
44. Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling10.1016/j.apenergy.2016.05.122 ↗
45. Thermal performance investigation of an air-cooled lithium-ion battery pack considering the inconsistency of battery cells10.1016/j.applthermaleng.2019.03.042 ↗
46. Domain size control in all-polymer solar cells10.1016/j.isci.2022.104090 ↗
47. A combinatory ferroelectric compound bridging simple ABO3 and A-site-ordered quadruple perovskite10.1038/s41467-020-20833-6 ↗
48. Hierarchical polygon Co3O4 flakes/N, O-dual doped porous carbon frameworks for flexible hybrid supercapacitors
49. Unusual size effect in ion and charge transport in micron-sized particulate aluminum anodes of lithium-ion batteries
50. Activated metal-organic frameworks (a-MIL-100 (Fe)) as fillers in polymer electrolyte for high-performance all-solid-state lithium metal batteries
51. Development of the inorganic composite phase change materials for passive thermal management of Li-ion batteries: Application10.1016/j.jpowsour.2021.229624 ↗
52. Thermal runaway evaluation and thermal performance enhancement of a lithium-ion battery coupling cooling system and battery sub-models10.1016/j.applthermaleng.2021.117884 ↗
53. Emergence of elevated battery positioning in air cooled battery packs for temperature uniformity in ultra-fast dis/charging applications
54. Canopy-to-canopy liquid cooling for the thermal management of lithium-ion batteries, a constructal approach10.1016/j.ijheatmasstransfer.2021.121918 ↗
55. Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials10.1016/j.applthermaleng.2020.116151 ↗
56. Thermal modeling of cylindrical lithium ion battery during discharge cycle10.1016/j.enconman.2011.04.013 ↗
57. Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling10.1016/j.energy.2019.116048 ↗
58. Numerical and analytical modeling of lithium ion battery thermal behaviors with different cooling designs10.1016/j.jpowsour.2013.01.095 ↗
59. Simulation of temperature distribution in cylindrical and prismatic lithium ion secondary batteries10.1016/j.enconman.2006.12.012 ↗
60. Thermal management of lithium-ion batteries for electric vehicles10.1002/er.1956 ↗
61. Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter10.1016/j.jpowsour.2003.09.070 ↗
62. Novel hybrid thermal management for Li-ion batteries with nanofluid cooling in the presence of alternating magnetic field: an experimental study10.1016/j.csite.2021.101539 ↗
63. Battery thermal management design modeling10.3390/wevj1010126 ↗
64. Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature10.1016/j.jpowsour.2008.04.050 ↗
65. An alternative cooling system to enhance the safety of Li-ion battery packs10.1016/j.jpowsour.2009.06.074 ↗
66. Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: a comparative analysis between aligned and staggered cell arrangements10.1016/j.applthermaleng.2015.01.049 ↗