Development of test protocols for solid oxide electrolysis cells operated under accelerated degradation conditions
Source abstract
Abstract
In order to be a real competitor to other industrial-scale hydrogen production technologies, solid oxide electrolysis cells (SOEC) must present essential features such as high hydrogen production rates, load flexibility and high system efficiency. However, operating conditions necessary to achieve these objectives can induce undesired performance deterioration and microstructural degradation negatively influencing the long-term stability of SOECs. This work provides the results of experimental investigations on the performance of SOECs operated under different operating conditions. In order to induce and accelerate specific degradation phenomena high steam partial pressures, fast load changes, high voltages, high steam conversion rates and alternating mode were applied. Different kinds and degrees of impact on performance and microstructure were observed and analyzed in detail. Correlations between performance changes and their underlying processes were investigated and useful connections between them were discovered. The major findings are summarized in the form of a suggestion for accelerated stress test (AST) protocols for SOECs. The developed ASTs enable deeper understanding of several degradation phenomena induced by different operating conditions and present methods for identification thereof. Further, the ASTs were estimated to have potential to predict performance changes over long-term operating periods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Molten salt chemistry and electrochemical processes · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Green methods for hydrogen production10.1016/j.ijhydene.2011.03.173 ↗
2. A comparative overview of hydrogen production processes10.1016/j.rser.2016.09.044 ↗
3. Production of synthesis gas (H2 and CO) by high-temperature co-electrolysis of H2O and CO210.1016/j.ijhydene.2015.06.034 ↗
4. High temperature solid oxide H2O/CO2 co-electrolysis for syngas production10.1016/j.fuproc.2016.08.009 ↗
5. Review–Materials degradation of solid oxide electrolysis cells10.1149/2.0101611jes ↗
6. Electromotive potential distribution and electronic leak currents in working YSZ based SOCs10.1149/1.3205660 ↗
7. Performance and degradation of an SOEC stack with different cell components10.1016/j.electacta.2017.11.180 ↗
8. Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation10.1016/j.jpowsour.2012.09.061 ↗
9. A detailed post mortem analysis of solid oxide electrolyzer cells after long-term stack operation10.1149/2.0961805jes ↗
10. Co-electrolysis with CFY-stacks10.1149/07801.3089ecst ↗
11. Ni/YSZ electrode degradation studied by impedance spectroscopy - Effect of p(H2O)10.1016/j.ssi.2010.01.004 ↗
12. Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode10.1016/j.jpowsour.2010.08.047 ↗
13. Solid oxide electrolysis cells: Microstructure and degradation of the Ni/yttria-stabilized zirconia electrode10.1149/1.2967331 ↗
14. Microstructural degradation of Ni/YSZ electrodes in solid oxide electrolysis cells under high current10.1149/2.098308jes ↗
15. Understanding degradation of solid oxide electrolysis cells through modeling of electrochemical potential profiles10.1016/j.electacta.2015.12.067 ↗
16. Silica segregation in the NiYSZ electrode10.1149/1.2733861 ↗
17. Microstructure degradation of an anode/electrolyte interface in SOFC studied by transmission electron microscopy10.1016/j.ssi.2004.08.018 ↗
18. Part load operation of a solid oxide electrolysis system for integration with renewable energy sources10.1016/j.ijhydene.2015.04.059 ↗
19. Degradation studies of ceria-based solid oxide fuel cells at intermediate temperature under various load conditions10.1016/j.jpowsour.2020.227758 ↗
20. Hydrogen and synthetic fuel production from renewable energy sources10.1016/j.ijhydene.2007.04.042 ↗
21. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
22. Atomic-scale mechanisms of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2011.09.117 ↗
23. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
24. Study of solid oxide electrolysis cells operated in potentiostatic mode: Effect of operating temperature on durability10.1016/j.cej.2021.129260 ↗
25. Electronic conduction of yttria-stabilized zirconia electrolyte in solid oxide cells operated in high temperature water electrolysis10.1149/1.3138701 ↗
26. Micro-spectroscopic study of the degradation of scandia and ceria stabilized zirconia electrolytes in solid oxide electrolysis cells10.1016/j.ijhydene.2011.07.082 ↗
27. Long-term steam electrolysis with electrolyte-supported solid oxide cells10.1016/j.electacta.2015.04.141 ↗
28. Nine thousand hours of operation of a solid oxide cell in steam electrolysis mode10.1149/2.076202jes ↗
29. Solid oxide electrolyzer stack with 20,000 h of operation10.1149/07801.2885ecst ↗
30. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
31. Long term behavior of solid oxide electrolyser (SOEC) stacks10.1149/09101.2713ecst ↗
32. Long-term tests of a Jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes10.1016/j.ijhydene.2013.01.192 ↗
33. Degradation in solid oxide electrolysis cells during long term testing10.1002/fuce.201900081 ↗
34. Post-test characterization of a solid oxide fuel cell stack operated for more than 30,000 hours: The cell10.1016/j.jpowsour.2017.11.025 ↗
35. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
36. Accelerated stress test procedures for PEM fuel cells under actual load constraints: State-of-art and proposals10.1016/j.ijhydene.2015.07.026 ↗
37. Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes10.1016/j.jpowsour.2016.05.117 ↗
38. On the mobility of carbon-supported platinum nanoparticles towards unveiling cathode degradation in water electrolysis10.1016/j.jpowsour.2017.07.033 ↗
39. Influence of electrode design and contacting layers on performance of electrolyte supported SOFC/SOEC single cells10.3390/ma9110906 ↗
40. Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate10.1016/j.jpowsour.2015.06.133 ↗
41. Performance assessment and evaluation of SOC stacks designed for application in a reversible operated 150 kW rSOC power plant
42. Z-hit : A simple relation between impedance modulus and phase angle. providing a new way to the validation of electrochemical impedance spectra
43. Application of measurement models to impedance spectroscopy III. Evaluation of consistency with the Kramers-Kronig relations10.1149/1.2048479 ↗
44. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: A Bayesian and hierarchical Bayesian approach10.1016/j.electacta.2015.03.123 ↗
45. Optimization of ESC performance for co-electrolysis operation10.1149/07801.3025ecst ↗
46. Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability
47. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
48. Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements10.1016/j.jpowsour.2019.226838 ↗
49. Performance and electrochemical analysis of solid oxide fuel cells based on LSCF-YSZ nano-electrode10.1111/ijac.12748 ↗
50. Performance and degradation of solid oxide electrolysis cells in stack10.1149/2.0941508jes ↗
51. Detailed characterization of anode-supported SOFCs by impedance spectroscopy10.1149/1.2433311 ↗
52. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
53. Surface segregation in solid oxide cell oxygen electrodes: Phenomena, mitigation strategies and electrochemical properties10.1007/s41918-020-00078-z ↗
54. 23,000 h steam electrolysis with an electrolyte supported solid oxide cell10.1016/j.ijhydene.2017.01.072 ↗
55. Solid oxide electrolysis cells: Degradation at high current densities10.1149/1.3447752 ↗
56. Scott · 2018 · 1