Cleaner and effective recovery of metals and synthetic lithium-ion batteries from extracted vanadium residue through selective leaching
Source abstract
Abstract
Abstract A process for recycling steelmaking waste is proposed, and high value-added lithium-ion batteries (LIBs) electrode materials LiFePO4 and Li4Ti5O12 are prepared. The precursor material FePO4·xH2O is prepared from the iron-rich filtrate formed after HCl leaching the waste residue. Using FePO4·xH2O and Li2CO3 as raw materials by the carbothermal reduction method, LiFePO4 containing a small amount of metal doping is prepared. By comparing the XRD patterns, it is found that the purity of the synthesized LiFePO4 material is higher if the precursor whose Fe–P molar ratio is close to the theoretical value of 1 is used as the raw material. The initial discharge capacity of LiFePO4/C at 0.1C is 139.3 mAh·g−1, and after 50 cycles, the capacity retention rate is 94.97%. In sulfuric acid medium, NH3·H2O and H2O2 are used to selectively leaching Ti from the titanium-rich slag. High-purity TiO2 is prepared by calcining the peroxy titanium compound. The spinel-type lithium-ion battery anode material Li4Ti5O12 is prepared with TiO2 as the precursor. The initial discharge capacity of the battery assembled with Li4Ti5O12 at 0.1C is 163.3 mAh·g−1. This study is helpful to solve the environmental pollution problem and the energy crisis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Advancements in Battery Materials · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Lithium-ion battery 2nd life used as a stationary energy storage system: ageing and economic analysis in two real cases10.1016/j.jclepro.2020.122584 ↗
2. Structure and performance of LiFePO4 cathode materials: a review10.1016/j.jpowsour.2010.11.113 ↗
3. Materials and electrode engineering of high capacity anodes in lithium ion batteries10.1016/j.jpowsour.2019.227697 ↗
4. An environmentally friendly discharge technology to pretreat spent lithium-ion batteries10.1016/j.jclepro.2019.118820 ↗
5. Recovery of valuable metals from spent lithium-ion batteries by ultrasonic-assisted leaching process10.1016/j.jpowsour.2014.04.013 ↗
6. Use of mild organic acid reagents to recover the Co and Li from spent Li-ion batteries10.1016/j.wasman.2015.12.008 ↗
7. Dissolution of cathode active material of spent Li-ion batteries using tartaric acid and ascorbic acid mixture to recover Co10.1016/j.hydromet.2016.01.026 ↗
8. Life cycle assessment of lithium nickel cobalt manganese oxide (NCM) batteries for electric passenger vehicles10.1016/j.jclepro.2020.123006 ↗
9. Environmental impacts of small-scale hybrid energy systems: coupling solar photovoltaics and lithium-ion batteries10.1016/j.scitotenv.2018.06.290 ↗
10. Standalone direct pumping photovoltaic system or energy storage in batteries for supplying irrigation networks. cost analysis10.1016/j.scitotenv.2019.04.050 ↗
11. Designing innovative clean energy programs: transforming organizational strategies for a low-carbon transition10.1016/j.erss.2020.101545 ↗
12. Ultrasonic-assisted cleaning of Indian low-grade coal for clean and sustainable energy10.1016/j.jclepro.2018.06.030 ↗
13. Nanoscale electrical resistance imaging of solid electrolyte interphases in lithium-ion battery anodes10.1016/j.jpowsour.2018.10.027 ↗
14. Co-doped Li4Ti5O12 nanosheets with enhanced rate performance for lithium-ion batteries10.1016/j.electacta.2017.08.121 ↗
15. Rational design of flower-like FeCo2S4/reduced graphene oxide films: novel binder-free electrodes with ultra-high conductivity flexible substrate for high-performance all-solid-state pseudocapacitor10.1016/j.cej.2019.122695 ↗
16. A three-dimensional tin-coated nanoporous copper for lithium-ion battery anodes10.1016/j.jpowsour.2010.12.021 ↗
17. Li4Ti5O12 coated with ultrathin aluminum-doped zinc oxide films as an anode material for lithium-ion batteries10.1016/j.jpowsour.2019.226859 ↗
18. A high rate, high capacity and long life (LiFePO4+ AC)/Li4Ti5O12 hybrid Battery-Supercapacitor10.4028/b-rJ9vYT ↗
19. Polyol-mediated carbon-coated Li4Ti5O12 nanoparticle/graphene composites with long-term cycling stability for lithium and sodium ion storages10.1016/j.cej.2019.123984 ↗
20. In situ catalytic growth 3D multi-layers graphene sheets coated nano-silicon anode for high performance lithium-ion batteries10.1016/j.cej.2018.09.110 ↗
21. Synthesis of carbon-coated Li4Ti5O12 and its electrochemical performance as anode material for lithium-ion battery10.1016/j.cclet.2017.11.034 ↗
22. Tuning the crystal and electronic structure of Li4Ti5O12 via Mg/La Co-doping for fast and stable lithium storage10.1016/j.ceramint.2020.02.066 ↗
23. Structure and morphology evolution in solid-phase synthesis lithium ion battery LiNi0.80Co0.15Al0.05O2 cathode materials with different micro-nano sizes of raw materials10.1016/j.ceramint.2018.02.141 ↗
24. One-step solid-phase synthesis of binder-free molybdenum disulfide/carbon fibers paper anode for high-performance lithium-ion batteries10.1016/j.jallcom.2018.07.220 ↗
25. New composite cathode materials for Li/S batteries: a review10.1016/S1452-3981(23)13112-9 ↗
26. Synthesis of F-doped LiFePO4/C cathode materials for high performance lithium-ion batteries using co-precipitation method with hydrofluoric acid source10.1016/j.jallcom.2017.08.149 ↗
27. Graphene-decorated carbon-coated LiFePO4 nanospheres as a high-performance cathode material for lithium-ion batteries10.1016/j.carbon.2017.10.101 ↗
28. State of health estimation of second-life LiFePO4 batteries for energy storage applications10.1016/j.jclepro.2018.09.149 ↗
29. Extraction of Ga and Ge from zinc refinery residues in H2C2O4 solutions containing H2O210.1016/j.minpro.2017.04.005 ↗
30. A novel low-cost and simple colloidal route for preparing high-performance carbon-coated LiFePO4 for lithium batteries10.1016/j.est.2018.05.009 ↗
31. Spray pyrolysis of conductor-and binder-free porous FeS2 films for high-performance lithium ion batteries10.1007/s10853-018-3055-0 ↗
32. Enhanced electrochemical property of FePO4-coated LiNi0.5Mn1.5O4 as cathode materials for Li-ion battery10.1016/j.scib.2017.07.003 ↗
33. Carbothermal reduction preparation and performance of LiFePO4/C by using ammonium jarosite extracted from vanadium slag as iron source10.1007/s11581-019-03155-6 ↗
34. Facile strategies to utilize FeSO4•7H2O waste slag for LiFePO4/C cathode with high performances10.1016/j.jtice.2019.03.002 ↗
35. Simultaneously dual modification of Ni‐rich layered oxide cathode for high‐energy lithium‐ion batteries
36. Solid-state synthesis of lanthanum-based oxides Co-coated LiNi0.5Co0.2Mn0.3O2 for advanced lithium ion batteries
37. Beneficiation of titania by sulfuric acid pressure leaching of Panzhihua ilmenite10.1016/j.hydromet.2014.09.016 ↗
38. Preparation of TiO2 nanosheets and Li4Ti5O12 anode material from natural ilmenite10.1016/j.powtec.2011.07.034 ↗
39. A study of the electro-assisted reductive leaching of a chalcopyrite concentrate in HCl solutions. Part I: kinetic behavior and nature of the chalcopyrite reduction10.1016/j.hydromet.2018.09.012 ↗
40. Enhanced selective recovery of selenium from anode slime using MnO2 in dilute H2SO4 solution as oxidant10.1016/j.jclepro.2018.10.144 ↗
41. Magnesiation roasting-acid leaching: a zero-discharge method for vanadium extraction from vanadium slag
42. Factors affecting the leaching mechanism of Mg bearing oxide impurities in hydrogen assisted magnesiothermic reduction (HAMR) of TiO2
43. Synthesis of rutile TiO2 powder by microwave-enhanced roasting followed by hydrochloric acid leaching10.1016/j.apt.2019.12.042 ↗
44. Leaching of spent selective catalytic reduction catalyst using alkaline melting for recovery of titanium, tungsten, and vanadium10.1016/j.hydromet.2019.105132 ↗
45. Characterization of the perhydroxytitanyl (2+) ion in acidic aqueous solution products and kinetics of its decomposition10.1021/ic00269a017 ↗
46. Removal of silicon from highly acidic HCl medium to produce purified TiO210.1016/j.hydromet.2017.08.023 ↗
47. Thermodynamic restrictions on non-isothermal chemical reaction rates10.1016/0040-6031(90)80280-C ↗
48. Synthesis of LiNi0.6Co0.2Mn0.2O2 from mixed cathode materials of spent lithium-ion batteries10.1016/j.jpowsour.2019.227567 ↗
49. Experimental and mechanism research on volatilization characteristics of HCl in desulfurization wastewater evaporation process using high temperature flue gas10.1016/j.jiec.2018.05.045 ↗
50. Hydrometallurgical criteria for TiO2 leaching from rosetta ilmenite by hydrochloric acid10.1016/j.hydromet.2007.01.003 ↗
51. Hydrothermal synthesis and characterization of α-Fe2O3/C using acid-pickled iron oxide red for Li-ion batteries10.1016/j.jhazmat.2019.01.106 ↗
52. Carbon materials for enhancing charge transport in the advancements of perovskite solar cells10.1016/j.jpowsour.2017.06.051 ↗
53. Bi-functional nitrogen-doped carbon protective layer on three-dimensional RGO/SnO2 composites with enhanced electron transport and structural stability for high-performance lithium-ion batteries10.1016/j.jcis.2019.01.126 ↗
54. Environmentally benign process for selective recovery of valuable metals from spent lithium-ion batteries by using conventional sulfation roasting10.1039/C9GC01350D ↗