Multiscale microstructural evolutions of nickel-gadolinium doped ceria in solid oxide fuel cell anode
Source abstract
Abstract
Abstract In the present study, multiscale microstructure evolutions of nickel and gadolinium doped ceria (Ni-GDC) composite anode operated under humidified condition (800 °C, 40%H2O:20%H2:40%N2) are investigated. Focused ion beam - scanning electron microscopy (FIB-SEM) with spatial resolutions of 2 nm and 25 nm are used to observe the changes in both local and whole microstructures. Significant multiscale reorganization of the microstructure is observed in both Ni and GDC phases. Migration of GDC nano-particles in the range of several micrometers is confirmed. In addition, thin GDC layer with nanometer thickness is formed on the Ni surface, similar to the strong metal support interaction (SMSI). Heterogeneous microstructural evolutions of the GDC phase are seen at the electrode-electrolyte interface and at the vicinity of the current collector. The GDC microstructural evolution is considered as a key factor of anode degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Microstructure optimization of nickel/gadolinium-doped ceria anodes as key to significantly increasing power density of metal-supported solid oxide fuel cells10.1016/j.ijhydene.2019.10.010 ↗
2. Evaluation of strontium doped lanthanum chromium manganite (LSCM) and gadolinium doped ceria (GDC) anode with different compositions10.1149/09101.1711ecst ↗
3. Nickel depletion and agglomeration in SOFC anodes during long-term operation10.1002/fuce.201600220 ↗
4. Influence of initial powder morphology on polarization characteristics of Nickel/Gadolinium-Doped-Ceria Solid Oxide Fuel Cells electrode10.1149/2.0181902jes ↗
5. Redox-induced self-modification of cermet anodes of Ni–CeO 2 -based oxide for solid oxide fuel cells10.1149/2.0551713jes ↗
6. Numerical modeling of nickel-infiltrated gadolinium-doped ceria electrodes reconstructed with focused ion beam tomography10.1016/j.electacta.2015.12.044 ↗
7. Comprehensive quantification of Ni–Gd0.1Ce0.9O1.95 anode functional layer microstructures by three-dimensional reconstruction using a FIB/SEM dual beam system10.1016/j.jpowsour.2012.11.117 ↗
8. Effect of composition on the structural development and electrical conductivity of NiO-GDC composites obtained by one-step synthesis10.1016/j.ceramint.2017.04.027 ↗
9. Electrolysis of CO2 in a proton conducting membrane10.1016/j.ssi.2013.05.021 ↗
10. Electrical properties of ceria-based oxides and their application to solid oxide fuel cells10.1016/0167-2738(92)90102-U ↗
11. Self-modification of Ni metal surfaces with CeO 2 to suppress carbon deposition at solid oxide fuel cell anodes10.1002/fuce.201600180 ↗
12. Evaluation of the effect of sulfur on the performance of nickel/gadolinium-doped ceria based solid oxide fuel cell anodes10.1002/cssc.201601320 ↗
13. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
14. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
15. Quantitative characterization of SOFC nickel-YSZ anode microstructure degradation based on focused-ion-beam 3D-reconstruction technique10.1149/2.045203jes ↗
16. Agglomeration behavior of nickel particles on YSZ electrolyte10.1016/j.ssi.2012.04.010 ↗
17. Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
18. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells10.1016/j.jpowsour.2010.08.006 ↗
19. Microstructure degradation of Ni/CGO anodes for solid oxide fuel cells after long operation time using 3D reconstructions by FIB tomography10.1039/C7CP02186K ↗
20. Evaluation of the influence of gadolinium doped ceria particle size on the electrochemical performance and microstructure of nickel-gadolinium doped ceria anodes10.1149/07801.1149ecst ↗
21. Electrochemically induced nickel/ceria interaction in solid oxide electrochemical cells with oxide ion conducting electrolyte10.1149/2.0451910jes ↗
22. Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique10.1016/j.jpowsour.2009.09.005 ↗
23. Numerical assessment of SOFC anode polarization based on three-dimensional model microstructure reconstructed from FIB-SEM images10.1149/1.3330568 ↗
24. Enhanced triple-phase boundary density in infiltrated electrodes for solid oxide fuel cells demonstrated by high-resolution tomography10.1016/j.jpowsour.2014.05.038 ↗
25. Local evolution of anode microstructure morphology in a solid oxide fuel cell after long-term stack operation10.1016/j.jpowsour.2015.04.092 ↗
26. Dependence of solid oxide fuel cell electrode microstructure parameters on focused ion beam - scanning electron microscopy resolution10.1016/j.ijhydene.2016.09.006 ↗
27. The fractal nature of the three-phase boundary: a heuristic approach to the degradation of nanostructured solid oxide fuel cell anodes10.1016/j.nanoen.2017.06.028 ↗
28. Fabrication of a micropatterned composite electrode for solid oxide fuel cells via ultraviolet nanoimprint lithography10.1016/j.mee.2020.111277 ↗
29. Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode10.1016/j.jpowsour.2010.08.047 ↗
30. Three-dimensional numerical analysis of mixed ionic and electronic conducting cathode reconstructed by focused ion beam scanning electron microscope10.1016/j.jpowsour.2010.11.142 ↗
31. Reference electrode placement in thin solid electrolytes10.1149/1.1467368 ↗
32. The use of voltage probes in impedance spectroscopy10.1016/j.ssi.2004.06.024 ↗
33. Distortions in electrochemical impedance spectroscopy measurements using 3-electrode methods in SOFC. I-effect of cell geometry10.1002/fuce.200700019 ↗
34. Placement of reference electrode, electrolyte thickness and three-electrode cell configuration in solid oxide fuel cells: a brief review and update on experimental approach10.1149/2.1331707jes ↗
35. Determination of the reaction zone in gadolinia-doped ceria anode for solid oxide fuel cell10.1149/1.2975322 ↗
36. Degradation analysis of solid oxide fuel cells with (La,Sr)(Co,Fe)O 3- δ cathode/Gd 2 O 3 –CeO 2 interlayer/Y 2 O 3 –ZrO 2 electrolyte system: the influences of microstructural change and solid solution formation10.1149/2.0841904jes ↗
37. Elucidating the degradation mechanism at the cathode-interlayer interfaces of solid oxide fuel cells10.1149/2.0941816jes ↗
38. Evaluation of La 0.57 Sr 0.38 Co 0.2 Fe 0.8 O 3-δ electrode performance degradation based on three-dimensional microstructure reconstruction and electrochemical simulation10.1149/2.1091912jes ↗
39. High durability of La0.6Sr0.4Co0.2Fe0.8O3-δ/samaria-doped ceria (SDC) composite oxygen electrode with SDC interlayer for reversible solid oxide fuel cell/solid oxide electrolysis cell10.2109/jcersj2.16274 ↗
40. Charge transfer drives anomalous phase transition in ceria10.1038/s41467-018-07526-x ↗
41. Expansion behavior of Ce[sub 1−y]Gd[sub y]O[sub 2.0−0.5y−δ] under various oxygen partial pressures evaluated by HTXRD10.1149/1.1580133 ↗
42. Influence of polarization on the morphological changes of nickel in fuel electrodes of solid oxide cells10.1149/1945-7111/ab6f5b ↗
43. In operando optical study of active three phase boundary of nickel-yttria stabilized zirconia solid-oxide fuel cell anode under polarization10.1016/j.jpowsour.2018.06.001 ↗