3-D printed gradient porous composite electrodes improve anodic current distribution and performance in thermally regenerative flow battery for low-grade waste heat recovery
Source abstract
Abstract
Abstract A thermally regenerative flow battery (TRB) with 3-D porous Cu/C composite electrodes is constructed and its anodic current distribution is investigated with 5 anode electrode segments. It is demonstrated that there is a markedly uneven current distribution in a TRB with uniform porous electrodes (TRB-M), thereby limiting the maximum power generation. The contribution of each electrode segment to the total current decreases along the flow direction due to the high resistance of mass transfer and the increased consumption of ammonia during the reaction. The gradient porous electrodes have a significant influence on the distribution of the anodic current and the power generation of the TRBs. A TRB using a gradient porous electrode with decreasing pore diameter (TRB-LS) results in a more uniform anodic current distribution and a 17% increase in the maximum power compared to that of a TRB-M. Further improvements in the current distribution and performance of a TRB-LS are made by increasing the concentration of ammonia and the electrolyte flow rate by effectively enhancing mass transfer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Capturing the invisible resource: analysis of waste heat potential in Chinese industry10.1016/j.apenergy.2015.10.060 ↗
2. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
3. Waste heat recovery from diesel engines based on Organic Rankine Cycle10.1016/j.apenergy.2018.09.022 ↗
4. Novel experimental research on the compression process in organic Rankine cycle (ORC)10.1016/j.enconman.2017.01.025 ↗
5. A carbon fiber thermoelectric generator integrated as a lamina within an 8-ply laminate epoxy composite: efficient thermal energy harvesting by advanced structural materials10.1016/j.apenergy.2019.113512 ↗
6. Harvesting waste thermal energy using carbon-nanotube-based thermo-electrochemical cell10.1021/nl903267n ↗
7. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
8. An Adsorption Reverse Electrodialysis system for the generation of electricity from low-grade heat10.1016/j.apenergy.2018.09.112 ↗
9. Emerging electrochemical and membrane-based systems to convert low-grade heat to electricity10.1039/C7EE03026F ↗
10. A decision support system for waste heat recovery and energy efficiency improvement in data centres10.1016/j.apenergy.2019.05.029 ↗
11. A thermally regenerative ammonia-based battery for efficient harvesting of low-grade thermal energy as electrical power10.1039/C4EE02824D ↗
12. Enhancing low-grade thermal energy recovery in a thermally regenerative ammonia battery using elevated temperatures10.1002/cssc.201403290 ↗
13. A thermally-regenerative ammonia-based flow battery for electrical energy recovery from waste heat10.1002/cssc.201501513 ↗
14. A numerical model for a thermally-regenerative ammonia-based flow battery using for low grade waste heat recovery10.1016/j.jpowsour.2018.03.070 ↗
15. Improved electrical power production of thermally regenerative batteries using a poly(phenylene oxide) based anion exchange membrane10.1016/j.jpowsour.2017.01.003 ↗
16. High power thermally regenerative ammonia-copper redox flow battery enabled by a zero gap cell design, low-resistant membranes, and electrode coatings10.1021/acsaem.0c00400 ↗
17. Electrical power production from low-grade waste heat using a thermally regenerative ethylenediamine battery10.1016/j.jpowsour.2017.03.074 ↗
18. A thermally regenerative ammonia battery with carbon-silver electrodes for converting low-grade waste heat to electricity10.1016/j.jpowsour.2017.10.089 ↗
19. A bimetallic thermally-regenerative ammonia-based flow battery for low-grade waste heat recovery10.1016/j.jpowsour.2019.03.086 ↗
20. On the regeneration of thermally regenerative ammonia batteries10.1007/s10800-018-1240-0 ↗
21. Anodic current distribution in a liter-scale microbial fuel cell with electrode arrays10.1016/j.cej.2013.03.035 ↗
22. Copper foam electrodes for increased power generation in thermally regenerative ammonia-based batteries for low-grade waste heat recovery10.1021/acs.iecr.9b00616 ↗
23. Performance of a thermally regenerative ammonia-based flow battery with 3D porous electrodes: effect of reactor and electrode design
24. Uneven biofilm and current distribution in three-dimensional macroporous anodes of bio-electrochemical systems composed of graphite electrode arrays10.1016/j.biortech.2016.12.092 ↗
25. Analysis and improvement of a scaled-up and stacked microbial fuel cell10.1021/es901939r ↗
26. Anode substrate with continuous porosity gradient for tubular solid oxide fuel cells10.1016/j.elecom.2013.11.009 ↗
27. 3D printed porous carbon anode for enhanced power generation in microbial fuel cell10.1016/j.nanoen.2017.11.070 ↗
28. Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell10.1016/j.cej.2009.09.031 ↗
29. Increasing power generation for scaling up single chamber air cathode microbial fuel cells10.1016/j.biortech.2010.12.104 ↗
30. Mass transfer and hydrodynamic characterization of structured 3D electrodes for electrochemistry
31. Achieving gradient-pore-oriented graphite felt for vanadium redox flow batteries: meeting improved electrochemical activity and enhanced mass transport from nano-to micro-scale10.1039/C9TA00807A ↗
32. Phosphorus-doped graphite felt allowing stabilized electrochemical interface and hierarchical pore structure for redox flow battery10.1016/j.apenergy.2019.114369 ↗
33. Twin-cocoon-derived self-standing nitrogen-oxygen-rich monolithic carbon material as the cost-effective electrode for redox flow batteries10.1016/j.jpowsour.2019.03.023 ↗
34. Configuration of gradient-porous ultrathin FeCo2S4 nanosheets vertically aligned on Ni foam as a noncarbonaceous freestanding oxygen electrode for lithium–oxygen batteries10.1039/C9NR09192K ↗
35. Cu/Ni composite electrodes for increased anodic coulombic efficiency and electrode operation time in a thermally regenerative ammonia-based battery for converting low-grade waste heat into electricity10.1016/j.renene.2020.05.147 ↗
36. Integrating reverse‐electrodialysis stacks with flow batteries for improved energy recovery from salinity gradients and energy
37. Increased performance of a tubular microbial fuel cell with a rotating carbon-brush anode10.1016/j.bios.2014.08.014 ↗
38. Effect of anolyte recirculation rates and catholytes on electricity generation in a litre-scale upflow microbial fuel cell10.1039/c001201g ↗
39. Step-feed strategy enhances performance of unbuffered air-cathode microbial fuel cells10.1039/C7RA03769D ↗