Mesoporous Mn2O3 rods as a highly efficient catalyst for Li-O2 battery
Source abstract
Abstract
Abstract Li-O 2 batteries are considered as one of the future candidates for electrochemical power sources due to their high theoretical energy density. As the dominating component affects the performance of Li-O 2 batteries, O 2 -cathode catalyst with high efficiency, low price, facile preparation is important. Herein, polyhedral and porous Mn 2 O 3 rods are fabricated for cathode catalysts in Li-O 2 batteries via electrospinning method followed by calcination. The Mn 2 O 3 catalyst possesses a three-dimensional porous structure, which can offer good catalytic activity, expose plenty of active sites and improve the diffusion of electrolyte and O 2 . When employed as the cathode catalyst, the Li-O 2 batteries show enhanced initial discharge capacity of 9701 mA h g −1 at a current density of 200 mA g −1 , superior rate capacity and good cycling stability within 160 cycles at the capacity of 500 mA h g −1 . These enhanced performances demonstrate a facile method to fabricate Mn 2 O 3 with unique structure as a promising catalytic material for Li-O 2 batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Macroporous interconnected hollow carbon nanofibers inspired by golden-toad eggs toward a binder-free, high-rate, and flexible electrode10.1002/adma.201600012 ↗
2. Porous graphene nanoarchitectures: an efficient catalyst for low charge-overpotential, long life, and high capacity lithium-oxygen batteries10.1021/nl500397y ↗
3. One-dimensional RuO2/Mn2O3 hollow architectures as efficient bifunctional catalysts for lithium-oxygen batteries10.1021/acs.nanolett.6b00185 ↗
4. Three-dimensional interconnected network architecture with homogeneously dispersed carbon nanotubes and layered MoS2 as a highly efficient cathode catalyst for lithium-oxygen battery10.1021/acsami.8b06912 ↗
5. Strategies toward high-performance cathode materials for lithium-oxygen batteries10.1002/smll.201800078 ↗
6. Recent progress in hierarchically structured O2-cathodes for Li-O2 batteries10.1016/j.cej.2018.06.014 ↗
7. Advances in manganese-based oxides cathodic electrocatalysts for Li-air batteries10.1002/adfm.201704973 ↗
8. Three-dimensional nanofibrous air electrode assembled with carbon nanotubes-bridged hollow Fe2O3 nanoparticles for high-performance lithium-oxygen batteries10.1021/acsami.7b15421 ↗
9. Platinum-Coated hollow graphene nanocages as cathode used in lithium-oxygen batteries10.1002/adfm.201602246 ↗
10. Nanoporous Ru as a carbon- and binder-free cathode for Li-O2 batteries10.1002/cssc.201403371 ↗
11. Core-shell-Structured CNT@RuO2 composite as a high-performance cathode catalyst for rechargeable Li-O2 batteries10.1002/anie.201307976 ↗
12. Superior performance of a Li-O2 battery with metallic RuO2 hollow spheres as the carbon-free cathode10.1002/aenm.201500294 ↗
13. Pd nanoparticles decorating flower-like Co3O4 nanowire clusters to form an efficient, carbon/binder-free cathode for Li-O2 batteries10.1039/C5TA03144C ↗
14. Mesoporous α-MnO2/Pd catalyst air electrode for rechargeable lithium–air battery10.1016/j.jpowsour.2010.09.112 ↗
15. Urchin-like alpha-MnO2 decorated with Au and Pd as a bi-functional catalyst for rechargeable lithium-oxygen batteries10.1016/j.jpowsour.2013.01.028 ↗
16. Au-coated carbon cathodes for improved oxygen reduction and evolution kinetics in aprotic Li-O2 batteries10.1016/j.elecom.2013.09.028 ↗
17. High-performance Li-O2 batteries with controlled Li2O2 growth in graphene/Au-nanoparticles/Au-nanosheets sandwich10.1002/advs.201500339 ↗
18. Mn3O4 quantum dots supported on nitrogen-doped partially exfoliated multiwall carbon nanotubes as oxygen reduction electrocatalysts for high-performance Zn-air batteries10.1021/acsami.8b06984 ↗
19. Oxygen-containing amorphous cobalt sulfide porous nanocubes as high-activity electrocatalysts for the oxygen evolution reaction in an alkaline/neutral medium10.1002/anie.201701280 ↗
20. Mesoporous MnCo2S4 nanosheet arrays as an efficient catalyst for Li-O2 batteries10.1039/C8NR03942A ↗
21. A composite of carbon-wrapped Mo2C nanoparticle and carbon nanotube formed directly on Ni foam as a high-performance binder-free cathode for Li-O2 batteries10.1002/adfm.201603462 ↗
22. Lithiophilic Co/Co4N nanoparticles embedded in hollow N-doped carbon nanocubes stabilizing lithium metal anodes for Li-air batteries10.1039/C8TA05013A ↗
23. Cobalt phosphide microsphere as an efficient bifunctional oxygen catalyst for Li-air batteries10.1016/j.jallcom.2018.04.070 ↗
24. High capacity Graphene/α-MnO2 nanocomposite cathodes for Li-O2 batteries10.1016/j.ijhydene.2016.02.093 ↗
25. MnO2-Based nanostructures as catalysts for electrochemical oxygen reduction in alkaline media†10.1021/cm901698s ↗
26. Investigations of the catalytic properties of manganese oxides for the oxygen reduction reaction in alkaline media10.1016/j.jelechem.2006.02.029 ↗
27. Electrocatalytic activity of manganese oxides prepared by thermal decomposition for oxygen reduction10.1016/j.electacta.2006.10.047 ↗
28. Hydrothermal synthesis of manganese oxide nanomaterials and their catalytic and electrochemical properties10.1021/cm2011692 ↗
29. Phase pure alpha-Mn2O3 prisms and their bifunctional electrocatalytic activity in oxygen evolution and reduction reactions10.1039/C6DT03158G ↗
30. Evaluation of MnOx, Mn2O3, and Mn3O4 electrodeposited films for the oxygen evolution reaction of water10.1021/jp500939d ↗
31. Mechanistic study on the activity of manganese oxide catalysts for oxygen reduction reaction in an aprotic electrolyte10.1016/j.electacta.2015.01.163 ↗
32. Nano-structured birnessite prepared by electrochemical activation of manganese(III)-based oxides for aqueous supercapacitors10.1016/j.electacta.2011.10.098 ↗
33. Facile synthesis of porous Mn2O3 nanocubics for high-rate supercapacitors10.1016/j.electacta.2015.01.056 ↗
34. Holey 2D nanosheets of low-valent manganese oxides with an excellent oxygen catalytic activity and a high functionality as a catalyst for Li-O2 batteries10.1002/adfm.201707106 ↗
35. Catalyst morphology matters for lithium-oxygen battery cathodes10.1088/0957-4484/27/49/495404 ↗
36. Viable synthesis of porous MnCo2O4/graphene composite by sonochemical grafting: a high-rate-capable oxygen cathode for Li-O2 batteries10.1002/chem.201803569 ↗
37. Modeling of the lithium-air battery cathodes with broad pore size distribution10.1016/j.cplett.2016.08.012 ↗
38. Hierarchically porous, ultrathick, “breathable” wood-derived cathode for lithium-oxygen batteries10.1002/aenm.201701203 ↗
39. Electrospun hollow nanofibers for advanced secondary batteries10.1016/j.nanoen.2017.06.050 ↗
40. Highly dispersed Mn2O3 microspheres: facile solvothermal synthesis and their application as Li-ion battery anodes10.1016/j.partic.2014.10.007 ↗
41. Predominance of two dimensional (2D) Mn2O3 nanowalls thin film for high performance electrochemical supercapacitors10.1016/j.cej.2017.08.060 ↗
42. Fabrication of chain-like Mn2O3 nanostructures via thermal decomposition of manganese phthalate coordination polymers10.1016/j.apsusc.2009.09.006 ↗
43. Structure-property relationship of bifunctional MnO2 nanostructures: highly efficient, ultra-stable electrochemical water oxidation and oxygen reduction reaction catalysts identified in alkaline media10.1021/ja505186m ↗
44. Effects of MnO2 of different structures on activation of peroxymonosulfate for bisphenol A degradation under acidic conditions10.1016/j.cej.2019.03.238 ↗
45. Advances in understanding mechanisms underpinning lithium-air batteries10.1038/nenergy.2016.128 ↗
46. Cathode surface-induced, solvation-mediated, micrometer-sized Li2O2 cycling for Li-O2 batteries10.1002/adma.201603454 ↗
47. A highly active nanostructured metallic oxide cathode for aprotic Li-O2 batteries10.1039/C4EE02587C ↗
48. Electrocatalysts of Mn and Ru oxides loaded on MWCNTS with 3D structure and synergistic effect for rechargeable Li-O2 battery10.1016/j.electacta.2018.06.040 ↗
49. Nucleation and growth of lithium peroxide in the Li-O2 battery10.1021/acs.nanolett.5b02149 ↗
50. Urchin-like NiO-NiCo2O4 heterostructure microsphere catalysts for enhanced rechargeable non-aqueous Li-O2 batteries10.1039/C8NR08457B ↗
51. Ordered mesoporous titanium nitride as a promising carbon-free cathode for aprotic lithium-oxygen batteries10.1021/acsnano.6b07635 ↗
52. Increased stability toward oxygen reduction products for lithium-air batteries with oligoether-functionalized silane electrolytes10.1021/jp2087412 ↗
53. In situ fabrication of porous-carbon-supported α-MnO2 nanorods at room temperature: application for rechargeable Li-O2 batteries10.1039/c2ee23621d ↗