Towards practical sulfolane based electrolytes: Choice of Li salt for graphite electrode operation
Source abstract
Abstract
Abstract Sulfolane (tetramethylene sulfone, SL) is known for leading to Li-ion electrolytes with high anodic stability. However, the operation of graphite electrodes in alternative electrolytes is usually challenging, especially when ethylene carbonate (EC) is not used as co-solvent. Thus, we study here the influence of the lithium salt on the physico-chemical and electrochemical properties of EC-free SL-based electrolytes and on the performance of graphite electrodes based on carboxymethyl cellulose (CMC). SL mixed with dimethyl carbonate (DMC) leads to electrolytes as conductive as state-of-the-art alkyl carbonate-based electrolytes with wide electrochemical stability windows. The compatibility with graphite electrodes depends on the Li salt used and, even though cycling is possible with most salts, lithium difluoro-oxalato borate (LiDFOB) is especially interesting for graphite operation. LiDFOB electrolytes are conductive at room temperature (ca. 6 mS cm−1) with an anodic stability slightly below 5 V vs. Li/Li+ on particulate carbon black electrodes. In addition, it allows cycling graphite electrodes with steady capacity and high coulombic efficiency without any additive. The testing of graphite electrodes in half-cells is, however, problematic with SL:DMC mixtures and, by switching the Li metal counter electrode for LiFePO4, the graphite electrode achieves better practical performance in terms of rate capability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. New electrolyte compositions stable over the 0 to 5 V voltage range and compatible with the Li1+xMn2O4/carbon Li-ion cells10.1016/0167-2738(94)90418-9 ↗
2. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
3. Electrolytes and interphases in Li-Ion batteries and beyond10.1021/cr500003w ↗
4. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the Solid electrolyte Interphase model10.1149/1.2128859 ↗
5. Studies of lithium intercalation into carbons using nonaqueous electrochemical cells10.1149/1.2086855 ↗
6. Surface film formation on a graphite negative electrode in lithium-ion batteries: atomic force microscopy study on the effects of film-forming additives in propylene carbonate solutions10.1021/la015553h ↗
7. High concentration dinitrile, 3-alkoxypropionitrile, and linear carbonate electrolytes enabled by vinylene and monofluoroethylene carbonate additives10.1149/2.016204jes ↗
8. Doped sulfone electrolytes for high voltage Li-ion cell applications10.1016/j.elecom.2009.05.020 ↗
9. Stable cycling of graphite in an ionic liquid based electrolyte10.1039/B407526A ↗
10. Synthesis and electrochemistry of LiNixMn2-xO410.1149/1.1837386 ↗
11. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
12. Olivine LiCoPO4 as 4.8 V electrode material for lithium batteries10.1149/1.1390994 ↗
13. Recent advances in the development of LiCoPO4 as high voltage cathode material for Li-Ion batteries10.1021/bk-2013-1140.ch004 ↗
14. Fluoride phosphate Li2CoPO4F as a high-voltage cathode in Li-ion batteries10.1016/j.jpowsour.2005.03.149 ↗
15. Sol–gel synthesis of Li2CoPO4F/C nanocomposite as a high power cathode material for lithium ion batteries10.1016/j.jpowsour.2012.07.099 ↗
16. Comparative ab initio calculations on several salts10.1016/0013-4686(95)00210-6 ↗
17. Intrinsic anion oxidation potentials10.1021/jp0653297 ↗
18. Oxidative stability and initial decomposition reactions of carbonate, sulfone, and alkyl phosphate-based electrolytes10.1021/jp400527c ↗
19. Why do sulfone-based electrolytes show stability at high voltages? insight from density functional theory10.1021/jz401726p ↗
20. Sulfone-based electrolytes for high-voltage Li-ion batteries10.1016/j.elecom.2009.03.020 ↗
21. Electrochemical properties and lithium ion solvation behavior of sulfone–ester mixed electrolytes for high-voltage rechargeable lithium cells10.1016/j.jpowsour.2008.01.006 ↗
22. Electrode/electrolyte interface in sulfolane-based electrolytes for Li ion batteries: a molecular dynamics simulation study10.1021/jp3054179 ↗
23. Molecular dynamics simulation studies of the structure of a mixed carbonate/LiPF6 electrolyte near graphite surface as a function of electrode potential10.1021/jp2101539 ↗
24. Recent progress in research on high-voltage electrolytes for lithium-ion batteries10.1002/cphc.201402175 ↗
25. High anodic stability of a new electrolyte solvent: unsymmetric noncyclic aliphatic sulfone10.1149/1.1838419 ↗
26. Sulfone-based electrolytes for lithium-ion batteries10.1149/1.1483866 ↗
27. Characteristics of sulfolane-based electrolytes for rechargeable lithium batteries10.1149/1.2113619 ↗
28. Note on an Organic-electrolyte cell with a high voltage10.1149/1.2408081 ↗
29. Graphite|LiFePO4 lithium-ion battery working at the heat engine coolant temperature10.1016/j.jpowsour.2014.04.083 ↗
30. Electrochemical performances of two kinds of electrolytes based on lithium bis(oxalate)borate and sulfolane for advanced lithium ion batteries10.1016/j.jpowsour.2012.03.004 ↗
31. Effect of sulfolane on the performance of lithium bis(oxalato)borate-based electrolytes for advanced lithium ion batteries10.1016/j.electacta.2012.01.052 ↗
32. Study of the electrochemical characteristics of sulfonyl isocyanate/sulfone binary electrolytes for use in lithium-ion batteries10.1016/j.jpowsour.2011.11.065 ↗
33. Properties of Li-graphite and LiFePO4 electrodes in LiPF6–sulfolane electrolyte10.1016/j.electacta.2011.04.105 ↗
34. Improving sulfolane-based electrolyte for high voltage Li-ion cells with electrolyte additives10.1016/j.jpowsour.2016.06.008 ↗
35. Enabling steady graphite anode cycling with high voltage, additive-free, sulfolane-based electrolyte: role of the binder10.1016/j.jpowsour.2017.04.073 ↗
36. Role of lithium salt on Solid electrolyte interface (SEI) formation and structure in lithium ion batteries10.1149/2.054406jes ↗
37. Study of SEI layer formed on graphite anodes in PC/LiBOB electrolyte using IR spectroscopy10.1149/1.1756855 ↗
38. Electrochimica Acta LiFSI vs. LiPF6 electrolytes in contact with lithiated graphite : comparing thermal stabilities and identification of specific SEI-reinforcing additives10.1016/j.electacta.2013.03.171 ↗
39. Anion conformation of low-viscosity room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(fluorosulfonyl) imide10.1021/jp074325e ↗
40. The imide ion: potential energy surface and geometries10.1016/S0013-4686(97)10047-0 ↗
41. Electrolyte solvation and ionic association II. Acetonitrile-lithium salt mixtures: highly dissociated salts10.1149/2.jes112264 ↗
42. Electrolyte solvation and ionic association: V. Acetonitrile-lithium bis(fluorosulfonyl)imide (LiFSI) mixtures10.1149/2.0101414jes ↗
43. LiTFSI structure and transport in ethylene carbonate from molecular dynamics simulations10.1021/jp056249q ↗
44. Anion coordination interactions in solvates with the lithium salts LiDCTA and LiTDI10.1021/jp412601x ↗
45. Restricting the solubility of polysulfides in Li-S batteries via electrolyte salt selection10.1002/aenm.201600160 ↗
46. Electrolyte solvation and ionic association: IV. Acetonitrile-lithium difluoro(oxalato)borate (LiDFOB) mixtures10.1149/2.094309jes ↗
47. Physical properties of Tetrahydrothiophene-1, 1-dioxide and 3-methyltetrahydrothiophene-1, 1-dioxide10.1021/je60020a047 ↗
48. LiTDI as electrolyte salt for Li-ion batteries: transport properties in EC/DMC10.1016/j.electacta.2015.08.165 ↗
49. Dielectric relaxation study of pyridine-water and pyridine-sulfolane mixtures using time domain reflectometry10.1016/S0167-7322(01)00238-0 ↗
50. Li · 2011 · 74
51. Lithium bis(fluorosulfonyl)imide (LiFSI) as conducting salt for nonaqueous liquid electrolytes for lithium-ion batteries: physicochemical and electrochemical properties10.1016/j.jpowsour.2010.12.040 ↗
52. Electrolytic properties of tetramethylammonium compound in highly concentrated solutions and its application to electric double-layer capacitors10.5796/electrochemistry.81.811 ↗
53. Fast Calculation of van der Waals Volume as a Sum of Atomic and Bond Contributions and Its Application to Drug Compounds10.1021/jo034808o ↗
54. NMR, DSC and high pressure electrical conductivity studies of liquid and hybrid electrolytes10.1016/S0378-7753(99)00144-5 ↗
55. Ambient temperature plastic crystal fast ion conductors (PLICFICS)10.1016/0167-2738(86)90180-3 ↗
56. (Invited) ionic liquids, superionic glasses, quasi-ionic liquids, quasi-liquid ionics, all with high conductivities but some with little fluidity. Where does the paradigm end?10.1149/06404.0009ecst ↗
57. Liquid electrolyte based on lithium bis-fluorosulfonyl imide salt: aluminum corrosion studies and lithium ion battery investigations10.1016/j.jpowsour.2008.08.077 ↗
58. Thermal stability and decomposition of lithium bis(fluorosulfonyl)imide (LiFSI) salts10.1039/C5RA25048J ↗
59. Chemical stability of lithium 2-Trifluoromethyl-4,5-dicyanoimidazolide, an electrolyte salt for Li-Ion cells10.1021/acs.jpcc.6b09837 ↗
60. Transport and electrochemical properties and spectral features of non-aqueous electrolytes containing LiFSI in linear carbonate solvents10.1149/1.3514705 ↗
61. Ishikawa · 2006 · 162 · 658
62. Electrochemical and physicochemical properties of PY14 FSI-based electrolytes with LiFSI10.1149/1.3208048 ↗