Streamline three-dimensional thermal model of a lithium titanate pouch cell battery in extreme temperature conditions with module simulation
Source abstract
Abstract
Abstract In this paper, the development of a three-dimensional (3D) lithium titanium oxide (LTO) pouch cell is presented to first better comprehend its thermal behavior within electrified vehicle applications, but also to propose a strong modeling base for future thermal management system. Current 3D-thermal models are based on electrochemical reactions which are in need for elaborated meshing effort and long computational time. There lacks a fast electro-thermal model which can capture voltage, current and thermal distribution variation during the whole process. The proposed thermal model is a reduce-effort temperature simulation approach involving a 0D-electrical model accommodating a 3D-thermal model to exclude electrochemical processes. The thermal model is based on heat-transfer theory and its temperature distribution prediction incorporates internal conduction and heat generation effect as well as convection. In addition, experimental tests are conducted to validate the model. Results show that both the heat dissipation rate and surface temperature uniformity data are in agreement with simulation results, which satisfies the application requirements for electrified vehicles. Additionally, a LTO battery pack sizing and modeling is also designed, applied and displays a non-uniformity of the cells under driving operation. Ultimately, the model will serve as a basis for the future development of a thermal strategy for LTO cells that operate in a large temperature range, which is a strong contribution to the existing body of scientific literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles10.1016/j.rser.2016.05.033 ↗
2. A comparative value chains analysis of battery technologies for electric vehicles
3. Electrochemically lithiated graphite characterised by photoelectron spectroscopy10.1016/S0378-7753(03)00277-5 ↗
4. Opportunities to improve recycling of automotive lithium ion batteries10.1016/j.procir.2015.02.039 ↗
5. Charging infrastructure planning for promoting battery electric vehicles: an activity-based approach using multiday travel data10.1016/j.trc.2013.11.001 ↗
6. Optimal battery charging, Part I: minimizing time-to-charge, energy loss, and temperature rise for OCV-resistance battery model
7. A review of power battery thermal energy management, Renew. Sustain
8. Calendar aging of commercial graphite/LiFePO4 cell Predicting capacity fade under time dependent storage conditions10.1016/j.jpowsour.2013.11.098 ↗
9. High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells10.1016/j.elecom.2005.04.018 ↗
10. Characterization and modeling of a hybrid electric vehicle lithium ion battery at low temperatures10.1109/TVT.2015.2391053 ↗
11. Li-ion cell operation at low temperatures10.1149/2.047304jes ↗
12. A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures10.1016/j.apenergy.2015.11.034 ↗
13. Assessment of performance of lithium iron phosphate oxide, nickel manganese cobalt oxide and nickel cobalt aluminum oxide based cells for using in plug-in battery electric vehicle applications
14. Hybrid electric vehicles and their challenges: a review10.1016/j.rser.2013.08.097 ↗
15. Thermal parameters determination of battery cells by local heat flux measurements10.1016/j.jpowsour.2014.07.117 ↗
16. An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack10.1016/j.energy.2016.07.119 ↗
17. Investigation of battery heat generation and efficiency using isothermal calorimeter
18. Assessment of the interaction of charging system and battery Technology for the use in urban battery electric bus systems
19. Heat transfer in the dynamic cycling of lithium-titanate batteries10.1016/j.ijheatmasstransfer.2015.11.007 ↗
20. Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation10.1016/j.jpowsour.2015.02.091 ↗
21. A modified multiphysics model for lithium-ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode10.1016/j.electacta.2015.06.015 ↗
22. Impact of tab location on large format lithium-ion pouch cell based on fully coupled tree-dimensional electrochemical-thermal modeling10.1016/j.electacta.2014.08.115 ↗
23. Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries10.1016/j.jpowsour.2013.03.007 ↗
24. Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions10.1016/j.applthermaleng.2015.11.019 ↗
25. Predicting heat generation in a lithium-ion pouch cell through thermography and the lumped capacitance model10.1016/j.jpowsour.2015.11.083 ↗
26. A multilayer electro-thermal model of pouch battery during normal discharge and internal short circuit process10.1016/j.applthermaleng.2017.03.135 ↗
27. Optimal charging of Li-Ion batteries with coupled electro-thermal-aging dynamics
28. IEEE transactions on industrial electronics A Generic electro-thermal Li-ion battery model for rapid evaluation of cell temperature10.1109/TIE.2016.2618363 ↗
29. Study on the thermal behaviors of power lithium iron phosphate (LFP) aluminum-laminated battery with different tab configurations10.1016/j.ijthermalsci.2014.11.018 ↗
30. Thermal analysis of a cylindrical lithium-ion battery10.1016/j.electacta.2010.10.054 ↗
31. A simulation on safety of LiFePO4/C cell using electrochemicalthermal coupling model10.1016/j.jpowsour.2013.03.100 ↗
32. A comparative study of equivalent circuit models for Li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
33. A reduced wide-temperature-range electro-thermal model and thermal parameters determination for lithium-ion batteries10.1016/j.egypro.2017.03.393 ↗
34. Electro-thermal model of lithium-ion batteries for electrified vehicles applications
35. Classification of electric modelling and characterization methods of lithium-ion batteries for vehicle applications
36. Linden · 2002
37. Advanced thermal management for temperature homogenization in high-power lithium-ion battery systems based on prismatic cells
38. BergmanN · 2007
39. A general energy balance for battery systems10.1149/1.2113792 ↗
40. Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles10.1016/j.apenergy.2014.06.016 ↗
41. Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell10.1016/j.jpowsour.2015.05.084 ↗
42. Thermodynamic assessment of active cooling/heating methods for lithium-ion batteries of electric vehicles in extreme conditions10.1016/j.energy.2013.10.088 ↗
43. Development of 2D thermal battery model for Lithium-ion pouch cells10.3390/wevj6030629 ↗
44. A thermal runaway simulation on a lithium titanate battery and the battery module10.3390/en8010490 ↗
45. Haynes · 2011
46. Battery models parameter estimation based on Matlab/Simulink
47. High fidelity electrical model with thermal dependence for characterization and simulation of high power lithium battery cells
48. Advancements in OCV measurement and analysis for lithium-ion batteries10.1109/TEC.2013.2259490 ↗
49. Lithium ion batteries development of advanced electrical equivalent circuit models for nickel manganese cobalt lithium-ion
50. Electro-thermal characterization of Lithium Iron Phosphate cell with equivalent circuit modeling10.1016/j.enconman.2014.07.011 ↗
51. Electrochemicalthermal analysis of 18650 lithium iron phosphate cell, energy convers
52. Surface temperature evolution and the location of maximum and average surface temperature of a lithium-ion pouch cell under variable load profiles
53. A distributed thermal model for a Li-ion electrode plate pair10.1016/j.jpowsour.2012.08.012 ↗
54. Comparative study of surface temperature behavior of commercial li-ion pouch cells of different chemistries and capacities by infrared thermography10.3390/en8088175 ↗
55. Development of a 2D-thermal model of three battery chemistries considering entropy