journal article·2018-01

Phase separation and ion conductivity in the bulk and at the surface of anion exchange membranes with different ion exchange capacities at different humidities

Taro Kimura, Ryo Akiyama, Kenji Miyatake, Junji Inukai

Publisher page

Abstract

Abstract For higher performances of anion exchange membrane (AEM) fuel cells, understanding the phase-separated structures inside AEMs is essential, as well as those at the catalyst layer/membrane interfaces. The AEMs based on quaternized aromatic semi-block copolymers with different ion exchange capacities (IECs) were systematically investigated. With IECs of 1.23 and 1.95 mequiv g−1, the water uptakes at room temperature were 37% and 98%, and the anion conductivities 23.6 and 71.4 mS cm−1, respectively. The increases were not proportional to the IEC. Images obtained by transmission electron microscopy in vacuum were similar with both IEC values, but the development of a clear phase separation in humidified nitrogen was observed in the profiles only with 1.95 mequiv g−1obtained by small-angle X-ray scattering. At the temperature of 40 °C and the relative humidity (RH) of 30%, the average currents observed at the tip apex by current-sensing atomic force microscopy were
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Fuel cells – fundamentals and applications10.1002/1615-6854(200105)1:1<5::AID-FUCE5>3.0.CO;2-G ↗
2. The chemical and structural nature of proton exchange membrane fuel cell properties10.1002/fuce.200400064 ↗
3. Polymeric materials as anion-exchange membranes for alkaline fuel cells10.1016/j.progpolymsci.2011.04.004 ↗
4. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
5. Anion exchange membranes: current status and moving forward10.1002/polb.23395 ↗
6. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
7. Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes10.1021/jp064898b ↗
8. Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts10.1073/pnas.0810041106 ↗
9. Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells10.1021/ja204166e ↗
10. Study of Pt-free anode catalysts for anion exchange membrane fuel cells10.1016/j.cattod.2010.11.012 ↗
11. Electrooxidation of hydrazine hydrate using Ni–La catalyst for anion exchange membrane fuel cells10.1016/j.jpowsour.2013.01.181 ↗
12. Synthesis and evaluation of carbon nanotubes supported silver catalyst for alkaline fuel cell10.1002/elan.201400246 ↗
13. Direct methanol anion exchange membrane fuel cell with a non-platinum group metal cathode based on iron-aminoantipyrine catalyst10.1016/j.electacta.2015.03.209 ↗
14. Random and block styrenic copolymers bearing both ammonium and fluorinated side-groups10.1002/pola.24913 ↗
15. Phenyltrimethylammonium functionalized polysulfone anion exchange membranes10.1021/ma401701n ↗
16. Water uptake, ionic conductivity and swelling properties of anion-exchange membrane10.1016/j.jpowsour.2013.06.095 ↗
17. Molecular dynamics simulation study of a polysulfone-based anion exchange membrane in comparison with the proton exchange membrane10.1021/jp412473j ↗
18. Enhanced performance of anion exchange membranes via crosslinking of ion cluster regions for fuel cells10.1016/j.jpowsour.2016.07.043 ↗
19. Sulfonated poly(arylene ether sulfone ketone) multiblock copolymers with highly sulfonated block. Synthesis and properties10.1021/ma100291z ↗
20. Proton-conductive aromatic ionomers containing highly sulfonated blocks for high-temperature-operable fuel cells10.1002/anie.200905355 ↗
21. Effect of ammonium groups on the properties and alkaline stability of poly(arylene ether)-based anion exchange membranes10.1002/pola.27011 ↗
22. Anion conductive aromatic polymers containing fluorenyl groups: effect of the position and number of ammonium groups10.1002/pola.27928 ↗
23. Aromatic copolymers containing ammonium-functionalized oligophenylene moieties as highly anion conductive membranes10.1021/ma5019878 ↗
24. Anion conductive aromatic copolymers from dimethylaminomethylated monomers: synthesis, properties, and applications in alkaline fuel cells10.1021/acs.macromol.6b00408 ↗
25. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
26. Alternative polymer systems for proton exchange membranes (PEMs)10.1021/cr020711a ↗
27. Fibrillar structure of nafion: matching fourier and real space studies of corresponding films and solutions10.1021/ma049683j ↗
28. Proton solvation and transport in realistic proton exchange membrane morphologies10.1021/acs.jpcc.5b11168 ↗
29. A critical revision of the nano-morphology of proton conducting ionomers and polyelectrolytes for fuel cell applications10.1002/adfm.201300376 ↗
30. Novel multiblock-co-ionomers as potential polymer electrolyte membrane materials10.1002/pola.22269 ↗
31. Development of aromatic polymer electrolyte membrane with high conductivity and durability for fuel cell10.1295/polymj.PJ2008220 ↗
32. Influence of microstructure and chemical composition on proton exchange membrane properties of sulfonated–fluorinated, hydrophilic–hydrophobic multiblock copolymers10.1016/j.memsci.2008.11.016 ↗
33. Double-layer ionomer membrane for improving fuel cell performance10.1021/am503295y ↗
34. Simple, effective molecular strategy for the design of fuel cell membranes: combination of perfluoroalkyl and sulfonated phenylene groups10.1021/acsenergylett.6b00198 ↗
35. Effect of surface ion conductivity of anion exchange membranes on fuel cell performance10.1021/acs.langmuir.6b01747 ↗
36. An effect of proton conductivity in electrolyte membranes on cathode performances at polymer electrolyte fuel cells10.1016/0022-0728(94)03619-5 ↗
37. Nanoscale current imaging of the conducting channels in proton exchange membrane fuel cells10.1021/nl061170y ↗
38. Proton conductivity study of a fuel cell membrane with nanoscale resolution10.1002/cphc.200600704 ↗
39. Local probe and conduction distribution of proton exchange membranes10.1021/jp0706230 ↗
40. Electrochemical atomic force microscopy study of proton conductivity in a Nafion membrane10.1039/b617516c ↗
41. Surface morphology and proton conduction imaging of nafion membrane10.1246/cl.2008.164 ↗
42. Conductance mapping of proton exchange membranes by current sensing atomic force microscopy10.1021/jp9070746 ↗
43. High-resolution imaging of ion conductivity of Nafion® membranes with electrochemical atomic force microscopy10.1016/j.electacta.2009.05.049 ↗
44. Configuration changes of conducting channel network in nafion membranes due to thermal annealing10.1021/jp108163a ↗
45. Oscillations of PEM fuel cells at low cathode humidification10.1016/j.jelechem.2010.04.005 ↗
46. Characteristics of microscopic proton current flow distributions in fresh and aged nafion membranes10.1021/jp911182q ↗
47. Correlating humidity-dependent ionically conductive surface area with transport phenomena in proton-exchange membranes10.1021/jp206154y ↗
48. Spatial distribution and dynamics of proton conductivity in fuel cell membranes: potential and limitations of electrochemical atomic force microscopy measurements10.1088/0953-8984/23/23/234109 ↗
49. Atomic force microscopy studies of conductive nanostructures in solid polymer electrolytes10.1016/j.electacta.2013.04.147 ↗
50. Conductive area ratio of multiblock copolymer electrolyte membranes evaluated by e-AFM and its impact on fuel cell performance10.1016/j.jpowsour.2009.06.045 ↗
51. Imaging individual proton-conducting spots on sulfonated multiblock-copolymer membrane under controlled hydrogen atmosphere by current-sensing atomic force microscopy10.1021/jp312041c ↗
52. Reversible/irreversible increase in proton-conductive areas on proton-exchange-membrane surface by applying voltage using current-sensing atomic force microscope10.1016/j.jelechem.2013.11.035 ↗
53. Effects of hot liquid-water treatment on local proton conductivity at surfaces of sulfonated poly(arylene ketone) block copolymer membrane for fuel cells studied by current-sensing atomic force microscopy10.1016/j.electacta.2014.08.031 ↗
54. Proton conductive areas on sulfonated poly(arylene ketone) multiblock copolymer electrolyte membrane studied by current-sensing atomic force microscopy10.5796/electrochemistry.82.369 ↗
55. Hydroxide solvation and transport in anion exchange membranes10.1021/jacs.5b11951 ↗
56. Scanning probe imaging of surface ion conductance in an anion exchange membrane10.1016/j.jpowsour.2012.07.039 ↗
57. Temperature- and humidity-controlled SAXS analysis of proton-conductive ionomer membranes for fuel cells10.1002/cssc.201301322 ↗