Physicochemical and electrochemical properties of carbon nanotube/graphite nanofiber hybrid nanocomposites for supercapacitor
Source abstract
Abstract
This work reports the combination of graphitic nanofibers (GNF) and carbon nanotubes (CNT) as the electrode material for supercapacitors. The hybrid CNT/GNF was prepared via a synthesis route that involved simple sonication and stirring. The loading of CNT was varied from 5 to 40% weight percentages. A specific capacitance of 174 Fg−1 has been obtained for 20 wt% CNT loading at 50 mV F g−1th 1 M H2SO4 aqueous solution as the electrolyte. The addition of 20 wt% CNT raised the specific capacitance by 87% more than the GNF electrodes. Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscope (TEM) reveals the random entanglement of CNT and GNF that create diffusion paths for ion transportation. Conformational changes were monitored by Raman spectroscopy, where two dominant peaks (D and G) showed strong intensities and sharp profiles. X-ray Diffraction spectroscopy (XRD) confirmed the purity of CNT/GNF hybrid nanocomposites. 20 wt% of CNT addition also shows an outstanding thermal stability. The marked improvement of the hybrid performance was attributed to the high conductivity of the two constituent materials, coupled with sufficient accessible active sites for electrochemical reactions that resulted in a synergistic behavior of the materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Synthesis and high electrochemical capacitance of N-doped microporous carbon/carbon nanotubes for supercapacitor10.1016/j.jelechem.2012.03.011 ↗
2. The preparation and electrochemical properties of MnO2/poly(3,4-ethylenedioxythiophene)/multiwalled carbon nanotubes hybrid nanocomposite and its application in a novel flexible micro-supercapacitor10.1016/j.electacta.2013.12.137 ↗
3. Nano ZnO@reduced graphene oxide composite for high performance supercapacitor: green synthesis in supercritical fluid10.1016/j.electacta.2013.12.063 ↗
4. Synthesis of Fe2O3–CNT–graphene hybrid materials with an open three-dimensional nanostructure for high capacity lithium storage10.1016/j.nanoen.2012.11.012 ↗
5. Carbon nanotubes for supercapacitor10.1007/s11671-009-9508-2 ↗
6. Hydrogen storage in platelet graphite nanofibers10.1016/j.seppur.2007.07.032 ↗
7. Graphene-beaded carbon nanofibers for use in supercapacitor electrodes: synthesis and electrochemical characterization10.1016/j.jpowsour.2012.09.004 ↗
8. Enhancing the rate performance of graphite anodes through addition of natural graphite/carbon nanofibers in lithium-ion batteries10.1016/j.electacta.2012.12.124 ↗
9. Carbon nanofibers as hydrogen adsorbing materials for power sources10.1016/j.jpowsour.2007.10.037 ↗
10. Herringbone-type carbon nanofibers with a small diameter and large hollow core synthesized by the catalytic decomposition of methane10.1016/S0008-6223(03)00107-6 ↗
11. Towards high purity graphene/single-walled carbon nanotube hybrids with improved electrochemical capacitive performance10.1016/j.carbon.2012.11.055 ↗
12. Three dimensional graphene oxide-carbon nanotubes and graphene-carbon nanotubes hybrids10.1016/S1452-3981(23)13212-3 ↗
13. A flexible graphene/multiwalled carbon nanotube film as a high performance electrode material for supercapacitors10.1016/j.electacta.2011.03.066 ↗
14. One-step green synthesis of graphene/ZnO nanocomposites for electrochemical capacitors10.1016/j.ceramint.2014.08.128 ↗
15. Chemically grafted graphene-polyaniline composite for application in supercapacitor10.1016/j.electacta.2014.04.033 ↗
16. Synergistic effect of three-dimensional multi-walled carbon nanotube-graphene nanofiller in enhancing the mechanical and thermal properties of high-performance silicone rubber10.1002/pi.4627 ↗
17. Multilayer super-short carbon nanotube/reduced graphene oxide architecture for enhanced supercapacitor properties10.1016/j.jpowsour.2013.08.122 ↗
18. ZnO nanorods inserted graphene sheets with improved supercapacitive performance10.1016/j.apsusc.2013.12.007 ↗
19. 3D graphene/ZnO nanorods composite networks as supercapacitor electrodes10.1016/j.jallcom.2014.09.105 ↗
20. Synthesis of a MnO2–graphene foam hybrid with controlled MnO2 particle shape and its use as a supercapacitor electrode10.1016/j.carbon.2012.06.014 ↗
21. Electrochemical characteristics and impedance spectroscopy studies of nano-cobalt silicate hydroxide for supercapacitor10.1016/j.jpowsour.2006.03.041 ↗
22. Effect of electrodeposition temperature on the electrochemical performance of a Ni(OH)2electrode10.1039/C1RA00613D ↗
23. Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide10.1016/j.elecom.2011.01.023 ↗
24. Electrospun pitch/polyacrylonitrile composite carbon nanofibers as high performance anodes for lithium-ion batteries10.1016/j.matlet.2015.07.033 ↗
25. Synthesis of graphene-multiwalled carbon nanotubes hybrid nanostructure by strengthened electrostatic interaction and its lithium ion battery application10.1039/c2jm16294f ↗
26. Stand-up structure of graphene-like carbon nanowalls on CNT directly grown on polyacrylonitrile-based carbon fiber paper as supercapacitor10.1016/j.diamond.2012.02.020 ↗
27. Capacitive behaviour of functionalized carbon nanotube/ZnO composites coated on a glassy carbon electrode10.1039/C5TA01725D ↗
28. Nanosized Ge@CNF, Ge@C@CNF and Ge@CNF@C composites via chemical vapour deposition method for use in advanced lithium-ion batteries10.1016/j.jpowsour.2013.12.017 ↗
29. Interfacial capacitance of graphene: correlated differential capacitance and in situ electrochemical Raman spectroscopy study10.1016/j.electacta.2013.04.004 ↗