Chromium poisoning in (La,Sr)MnO3 cathode: Three-dimensional simulation of a solid oxide fuel cell
Source abstract
Abstract
A three-dimensional numerical model of a single solid oxide fuel cell (SOFC) considering chromium poisoning on the cathode side has been developed to investigate the evolution of the SOFC performance over long-term operation. The degradation model applied in the simulation describes the loss of the cathode electrochemical activity as a decrease in the active triple-phase boundary (TPB) length. The calculations are conducted for two types of cell: lanthanum strontium manganite (LSM)/yttria-stabilized zirconia (YSZ)/Ni-YSZ and LSM-YSZ/YSZ/Ni-YSZ. Their electrode microstructures are acquired by imaging with a focused ion beam scanning-electron microscope (FIB-SEM). The simulation results qualitatively reproduce the trends of chromium poisoning reported in the literature. It has been revealed that the performance degradation by chromium is primarily due to an increase in the cathode activation overpotential. In addition, in the LSM-YSZ composite cathode, TPBs in the vicinity of the cathode–electrolyte interface preferentially deteriorate, shifting the active reaction site towards the cathode surface. This also results in an increase in the cathode ohmic loss associated with oxide ion conduction through the YSZ phase. The effects of the cell temperature, the partial pressure of steam at the chromium source, the cathode microstructure, and the cathode thickness on chromium poisoning are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
2. Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separator10.1016/0378-7753(94)02172-Y ↗
3. Deposition of chromium species at Sr-doped LaMnO3 electrodes in solid oxide fuel cells. I. Mechanism and kinetics10.1149/1.1394012 ↗
4. Dependence of SOFC cathode degradation by chromium-containing alloy on compositions of electrodes and electrolytes10.1149/1.1339869 ↗
5. Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y2O3 and the high chromium ferritic steel Crofer22APU10.1149/1.2172563 ↗
6. Chromium poisoning of the porous composite cathode effect of cathode thickness and current density10.1149/1.2784197 ↗
7. Chromium poisoning of LSM/YSZ and LSCF/CGO composite cathodes10.1002/fuce.200800143 ↗
8. Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+δ cathodes of solid oxide fuel cells10.1016/j.ijhydene.2009.12.185 ↗
9. Correlation between degradation of cathode performance and chromium concentration in (La,Sr)MnO3 cathode10.1016/j.ssi.2012.02.048 ↗
10. Thermodynamic considerations on Cr poisoning in SOFC cathodes10.1016/j.ssi.2006.07.055 ↗
11. Electrochemical model of solid oxide fuel cell for simulation at the stack scale II: implementation of degradation processes10.1149/1.3596435 ↗
12. Three-dimensional reconstruction of a solid-oxide fuel-cell anode10.1038/nmat1668 ↗
13. Three-dimensional numerical analysis of mixed ionic and electronic conducting cathode reconstructed by focused ion beam scanning electron microscope10.1016/j.jpowsour.2010.11.142 ↗
14. 3D finite element model for reconstructed mixed-conducting cathodes: I. Performance quantification10.1016/j.electacta.2012.04.109 ↗
15. Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique10.1016/j.jpowsour.2009.09.005 ↗
16. Three-dimensional simulation of SOFC anode polarization characteristics based on sub-grid scale modeling of microstructure10.1149/2.086203jes ↗
17. Improvement of the sub-grid-scale model designed for 3D numerical simulation of solid oxide fuel cell electrodes using an adaptive power index10.1016/j.jpowsour.2012.09.077 ↗
18. K. Miyoshi, T. Miyamae, H. Iwai, M. Saito, M. Kishimoto, H. Yoshida, Exchange current model for (La0.8Sr0.2)0.95MnO3 (LSM) porous cathode for solid oxide fuel cells, J. Power Sources, submitted.
19. Enhanced triple-phase boundary density in infiltrated electrodes for solid oxide fuel cells demonstrated by high-resolution tomography10.1016/j.jpowsour.2014.05.038 ↗
20. Numerical modeling of nickel-infiltrated gadolinium-doped ceria electrodes reconstructed with focused ion beam tomography10.1016/j.electacta.2015.12.044 ↗
21. Flow and diffusion of gases in porous media10.1063/1.1841191 ↗
22. Three-dimensional numerical simulation for various geometries of solid oxide fuel cells10.1016/0378-7753(95)02269-4 ↗
23. Electrical properties and oxygen diffusion in yttria-stabilised zirconia (YSZ)–La0.8Sr0.2MnO3±δ (LSM) composites10.1016/j.ssi.2004.11.019 ↗
24. Electronic transport in 8 mole percent Y2O3-ZrO210.1149/1.2096302 ↗
25. A mathematical model of a solid oxide fuel cell10.1149/1.2048415 ↗
26. A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells10.1016/j.electacta.2005.09.041 ↗
27. Electrical properties of Ni/YSZ cermets obtained through combustion synthesis10.1016/S0167-2738(98)00115-5 ↗
28. Numerical analysis of output characteristics of tubular SOFC with internal reformer10.1016/S0378-7753(01)00547-X ↗
29. Characteristics of slurry-coated nickel zirconia cermet anodes for solid oxide fuel cells10.1149/1.2086156 ↗
30. Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction10.1016/j.jpowsour.2008.06.029 ↗
31. Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes10.1149/1.1837264 ↗
32. Thermodynamics of gas phase chromium species: the chromium oxides, the chromium oxyhydroxides, and volatility calculations in waste incineration processes10.1016/0010-2180(93)90087-J ↗
33. Stack degradation in dependence of operation parameters; the real-SOFC sensitivity analysis10.1002/fuce.200800146 ↗
34. Justifying the significance of Knudsen diffusion in solid oxide fuel cells10.1016/j.energy.2015.12.022 ↗