Direct formation of LiFePO4/graphene composite via microwave-assisted polyol process
Source abstract
Abstract
Abstract The present study reports on the direct synthesis of LiFePO 4 nanoparticles and graphene nanosheets to form a composite cathode (LFP/GNs) in a one-step microwave-assisted polyol reaction. The polyol reaction induced by microwave irradiation for a few minutes produces nanocrystalline LFP and graphene nanosheets simultaneously from lithium, iron and phosphorus and carbon (5 wt% of graphite oxide) sources, respectively, used as starting precursors. Powder X-ray diffraction (XRD), electron microscopy, and atomic force microscopy (AFM) studies on microwave-reacted sample obtained using just graphite oxide confirms the formation of graphene nanosheets separately. Whereas, electron microscopy studies on the LFP/GNs composite reveals that olivine nanoparticles of average sizes ranging between 5 and 20 nm are well-dispersed on the graphene nanosheets. Electrochemical measurements reveal that the LiFePO 4 /GNs nanocomposite cathodes registered enhanced discharge capacities (79 and 108 mAh g −1 for the as-prepared and annealed composite cathodes, respectively) at 32 C rates with good capacity retention capabilities. The AC impedance measurements confirm that the enhanced cathode properties of the LFP/GNs nanocomposite are ascribed to the improved electronic conductivity of the graphene nanosheets and the nano-sized particles. The slightly better electrochemical properties of the annealed LFP/GNs are attributed to its higher crystallinity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Electroactivity of natural and synthetic triphylite10.1016/S0378-7753(01)00727-3 ↗
2. Approaching theoretical capacity of LiFePO4 at room temperature at high rates10.1149/1.1396695 ↗
3. Preparation of nano-structured LiFePO4/graphene composites by co-precipitation method10.1016/j.elecom.2009.10.023 ↗
4. High-rate LiFePO4 lithium rechargeable battery promoted by electrochemically active polymers10.1021/cm8012304 ↗
5. Electronically conductive phospho-olivines as lithium storage electrodes10.1038/nmat732 ↗
6. Intermediate phases in LixFePO4
7. Size effects on carbon-free LiFePO4 powders: the key to superior energy density, electrochem10.1149/1.2201987 ↗
8. Particle morphology, crystal orientation, and electrochemical reactivity of LiFePO4 synthesized by the hydrothermal method at 443 K10.1039/b711521k ↗
9. Synthesis of nanocrystals and morphology control of hydrothermally prepared LiFePO410.1039/b705443m ↗
10. Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries10.1016/j.elecom.2008.04.004 ↗
11. Storage performance of LiFePO4 nanoplates10.1039/B817242K ↗
12. Synthesis of highly crystalline olivine-type LiFePO4 nanoparticles by solution-based reactions10.1142/S0218625X10014053 ↗
13. Nitrogen-doped graphene as efficient metal-free electrocatalyst for oxygen reduction in fuel cells10.1021/nn901850u ↗
14. Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries10.1016/j.elecom.2009.04.036 ↗
15. Electrochemical deposition of ZnO nanorods on transparent reduced graphene oxide electrodes for hybrid solar cells10.1002/smll.200901968 ↗
16. The rise of graphene10.1038/nmat1849 ↗
17. Graphene production: new solutions to a new problem10.1038/nnano.2008.249 ↗
18. Graphene: the new two-dimensional nanomaterial10.1002/anie.200901678 ↗
19. Photochemical reactivity of graphene10.1021/ja9043906 ↗
20. Graphenes as potential material for electronics10.1021/cr068010r ↗
21. LiMn1−xFexPO4 nanorods grown on graphene sheets for ultrahigh-rate-performance lithium ion batteries10.1002/anie.201103163 ↗
22. A simple solvothermal route to synthesize graphene-modified LiFePO4 cathode for high power lithium ion batteries10.1016/j.jpowsour.2012.03.007 ↗
23. A novel LiFePO4/graphene/carbon composite as a performance-improved cathode material for lithium-ion batteries10.1016/j.electacta.2012.01.014 ↗
24. Graphene wrapped LiFePO4/C composites as cathode materials for Li-ion batteries with enhanced rate capability10.1039/c2jm32649c ↗
25. Mild solution synthesis of graphene loaded with LiFePO4–C nanoplatelets for high performance lithium ion batteries10.1039/C4NJ01485E ↗
26. Graphene modified LiFePO4 cathode materials for high power lithium ion batteries10.1039/c0jm03287e ↗
27. Microwave assisted synthesis of nanocrystalline Fe-phosphates electrode materials and their electrochemical properties10.1166/jnn.2008.1388 ↗
28. Preparation of graphitic oxide10.1021/ja01539a017 ↗
29. Jalili · ACS Nano · 2013 · 7 · 398110.1021/nn305906z ↗
30. Preparation of elemental Cu and Ni nanoparticles by the polyol method: An experimental and theoretical approach10.1021/jp1104196 ↗
31. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries10.1021/nl800957b ↗
32. LiFePO4 nanoparticles embedded in a nanoporous carbon matrix: Superior cathode material for electrochemical energy-storage devices10.1002/adma.200802998 ↗
33. A facile method of preparing mixed conducting LiFePO4/graphene composites for lithium-ion batteries10.1016/j.ssi.2010.09.056 ↗
34. One-pot microwave-hydrothermal synthesis and characterization of carbon-coated LiMPO4 (M = Mn, Fe, and Co) cathodes10.1149/1.3028304 ↗