Synthesis and characterization of three-dimensional carbon foams–LiFePO4 composites
Source abstract
Abstract
Abstract The characterization of three-dimensional (3D) carbon foams coated with olivine structured lithium iron phosphate is reported for the first time. The LiFePO 4 as cathode material for lithium ion batteries was prepared by a Pechini-assisted reversed polyol process. The coating has been successfully performed on commercially available 3D-carbon foams by soaking in aqueous solution containing lithium, iron salts and phosphates at 70 °C for 2–4 h. After drying-out, the composites were annealed at different temperatures in the range 600–700 °C for 15–20 min under nitrogen. The formation of the olivine-like structured LiFePO 4 was confirmed by X-ray diffraction analysis performed on the powder prepared under similar conditions. The surface investigation of the prepared composites showed the formation of a homogeneous coating by LiFePO 4 on the foams. The cyclic voltammetry curves of the composites show an enhancement of electrode reaction reversibility by decreasing the annealing temperature. The electrochemical measurements on the composites showed good performances delivering a discharge specific capacity of 85 mAh g −1 at a discharging rate of C/25 at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Padhi · J. Electrochem. Soc. · 1997 · 144 · 118810.1149/1.1837571 ↗
2. Kim · J. Phys. Chem. Solids · 2007 · 68 · 73410.1016/j.jpcs.2007.03.019 ↗
3. Andersson · Solid State Ionics · 2000 · 130 · 4110.1016/S0167-2738(00)00311-8 ↗
4. Chung · Nat. Mater. · 2002 · 2 · 12310.1038/nmat732 ↗
5. Yamada · J. Electrochem. Soc. · 2001 · 148 · A22410.1149/1.1348257 ↗
6. Croce · Electrochem. Solid-State Lett. · 2002 · 5 · A4710.1149/1.1449302 ↗
7. Barker · Electrochem. Solid-State Lett. · 2003 · 6 · A5310.1149/1.1544211 ↗
8. Dominko · Electrochem. Solid-State Lett. · 2005 · 152 · A858
9. Moskon · J. Electrochem. Soc. · 2006 · 153 · A180510.1149/1.2221864 ↗
10. Bhuvaneswari · J. Power Sources · 2008 · 180 · 55310.1016/j.jpowsour.2008.01.090 ↗
11. Long · Chem. Rev. · 2004 · 104 · 446310.1021/cr020740l ↗
12. Doherty · Chem. Mater. · 2009 · 21 · 530010.1021/cm9024167 ↗
13. K.C. Kelley, C.F. Ostermeier, M.J. Maroon, Battery having carbon foam collector, Patent US20040121238 A1 (2004).
14. N. Brazis, K.C. Kelley, M.J. Maroon, B.I. Mohanov, Composite carbon foam, Patent WO2008020852 A1 (2008).
15. T.S. Moore, S. Dinda, Lithium ion battery utilizing carbon foam electrodes, Patent WO2000016418 A1 (2000).
16. Dudney · 2007 · 23
17. L. Dimesso, C. Spanheimer, S. Jacke, W. Jaegermann, Ionics (2010), unpublished data.
18. M.P. Pechini, Method of preparing lead and alkaline earth titanates and niobates and coating method using the same to form a capacitor, Patent US3330697A (1967).
19. Murugan · Mater. Lett. · 2006 · 60 · 102310.1016/j.matlet.2005.10.068 ↗
20. Choi · J. Power Sources · 2007 · 163 · 106410.1016/j.jpowsour.2006.09.082 ↗