Material, configuration, and fabrication designs for lean-electrolyte lithium–sulfur cell with a high-loading sulfur cathode
Source abstract
Abstract
The lithium–sulfur battery is considered a promising candidate for third-generation commercial rechargeable batteries because of the high theoretical capacity of sulfur (1675 mA h g −1 ). However, the insulating solid-state active material causes low sulfur loading and content, challenging the increase of the energy density. The complex conversion reaction between solid-state and liquid-state active materials during charging/discharging process leads to high electrolyte usage and short cycle life. These issues affecting the evaluation of the electrochemical characteristics and performance of lithium–sulfur batteries are important for the commercialization of this technology. Herein, we propose a design of cathode material, configuration, and fabrication. This design realizes a porous carbon electrospun substrate built up with nonwoven carbon nanofibers having low nanoporosity. The carbon electrospun substrate is used as a porous electrode substrate to encapsulate insulating sulfur using a hot-pressing method, forming a hot-pressed electrospun cathode. The carbon electrospun substrate has a conductive, low-weight network to accommodate and exploit a high amount of sulfur (8 mg cm −2 and 73 wt%) at low electrolyte-to-sulfur ratios (7–4 μL mg −1), which achieves high charge-storage capacity (740 mA h g −1 ), large energy density (11.8 mW h cm −2), excellent rate performance (C/20–C/2 rates), and a prolonged cycle life (200 cycles).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Technological pathways toward sustainable batteries10.1016/j.oneear.2022.02.010 ↗
2. Lithium–sulfur batteries: state of the art and future directions10.1021/acsaem.7b00153 ↗
3. Review—advances in rechargeable Li-S full cells10.1149/1945-7111/ac638c ↗
4. Recent advances in heterostructure engineering for lithium–sulfur batteries10.1002/aenm.202003689 ↗
5. A perspective on energy densities of rechargeable Li–S batteries and alternative sulfur-based cathode materials10.1002/eem2.12003 ↗
6. Progress and perspectives of organosulfur for lithium–sulfur batteries10.1002/aenm.202103483 ↗
7. Perspective on the critical role of interface for advanced batteries10.1016/j.jechem.2019.09.034 ↗
8. Analysis of 3.4 Ah lithium–sulfur pouch cells by electrochemical impedance spectroscopy10.1016/j.jechem.2022.05.026 ↗
9. Investigation of the effect of temperature on lithium–sulfur cell cycle life performance using system identification and X-ray tomography
10. Status and perspectives of hierarchical porous carbon materials in terms of high-performance lithium–sulfur batteries10.1002/cey2.185 ↗
11. Strategies towards high performance lithium–sulfur batteries
12. Current status and future prospects of metal–sulfur batteries10.1002/adma.201901125 ↗
13. Metal−Sulfur batteries: overview and research methods10.1021/acsenergylett.8b02212 ↗
14. A review on theoretical models for lithium–sulfur battery cathodes10.1002/inf2.12304 ↗
15. Toward practical high-energy-density lithium–sulfur pouch cells: a review
16. Mapping techniques for the design of lithium–sulfur batteries
17. Lean-electrolyte lithium–sulfur batteries: recent advances in the design of cell components10.1016/j.cej.2022.138209 ↗
18. Advances in high sulfur loading cathodes for practical lithium–sulfur batteries
19. Cathode materials for rechargeable lithium–sulfur batteries: current progress and future prospects10.1002/celc.202101564 ↗
20. Designing principles of advanced sulfur cathodes toward practical lithium–sulfur batteries10.1002/sus2.42 ↗
21. Lithium–sulfur batteries: attaining the critical metrics10.1016/j.joule.2020.01.001 ↗
22. Review of multifunctional separators: stabilizing the cathode and the anode for alkali (Li, Na, and K) metal–sulfur and selenium batteries10.1021/acs.chemrev.1c00838 ↗
23. Progress on the critical parameters for lithium–sulfur batteries to be practically viable10.1002/adfm.201801188 ↗
24. Lean-electrolyte lithium–sulfur electrochemical cells with high-loading carbon nanotube/nanofiber–polysulfide cathodes10.1039/D0CC08276G ↗
25. Interlayer material selection for lithium–sulfur batteries10.1016/j.joule.2019.01.003 ↗
26. Recent progress of functional separators with catalytic effects for high-performance lithium–sulfur batteries10.1016/j.nanoen.2021.105928 ↗
27. Recent progress of separators in lithium–sulfur batteries10.1016/j.ensm.2021.05.034 ↗
28. Highly reversible lithium/dissolved polysulfide batteries with carbon nanotube electrodes10.1002/anie.201301250 ↗
29. Binder-free, freestanding cathodes fabricated with an ultra-rapid diffusion of sulfur into carbon nanofiber mat for lithium–sulfur batteries10.1016/j.mtener.2018.06.004 ↗
30. Lightweight, free-standing 3D interconnected carbon nanotube foam as a flexible sulfur host for high performance lithium–sulfur battery cathodes10.1016/j.ensm.2017.04.004 ↗
31. Sulfur-impregnated activated carbon fiber cloth as a binder-free cathode for rechargeable Li–S batteries10.1002/adma.201103274 ↗
32. A facile, low-cost hot-pressing process for fabricating lithium–sulfur cells with stable dynamic and static electrochemistry10.1002/adma.201805571 ↗
33. A review of biomass materials for advanced lithium–sulfur batteries10.1039/C9SC02743B ↗
34. Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review10.1039/C5TA06844D ↗
35. A review: electrospun nanofiber materials for lithium–sulfur batteries10.1002/adfm.201905467 ↗
36. Synergistic effect of sulfur-rich copolymer/S8 and carbon host porosity in Li–S batteries10.1016/j.electacta.2020.137088 ↗
37. Vanadium monoxide-based free-standing nanofiber hosts for high-loading lithium–sulfur batteries10.1021/acsaem.1c00293 ↗
38. Geometrical engineering of a SPAN–graphene composite cathode for practical Li–S batteries10.1039/D2TA01398C ↗
39. A design of the cathode substrate for high-loading polysulfide cathodes in lean-electrolyte lithium–sulfur cells10.1016/j.cej.2021.130363 ↗
40. Employing Ni-embedded porous graphitic carbon fibers for high-efficiency lithium–sulfur batteries10.1021/acsami.1c24755 ↗
41. Hierarchical porous carbon nanofibers with tunable geometries and porous structures fabricated by a scalable electrospinning technique10.1021/acsami.1c12302 ↗
42. Polysulfide shuttle study in the Li/S battery system10.1149/1.1806394 ↗
43. Characterization of the effect of cell design on Li−S battery resistance using electrochemical impedance spectroscopy10.1002/celc.202100165 ↗
44. High-energy-density Li–S battery with positive electrode of lithium polysulfides held by carbon nanotube sponge10.1016/j.carbon.2021.05.046 ↗
45. A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries10.1038/nmat2460 ↗
46. Hierarchically structured Ti3C2Tx MXene paper for Li–S batteries with high volumetric capacity10.1016/j.nanoen.2021.106120 ↗
47. Advances in high sulfur loading cathodes for practical lithium–sulfur batteries
48. Recent advances in lithium sulfide cathode materials and their use in lithium sulfur batteries10.1002/aenm.201500110 ↗
49. Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modeling and analysis of capacity fading10.1149/2.026304jes ↗
50. Revisiting the role of polysulfides in lithium-sulfur batteries